Product Overview
This document provides instructions for the Cecotec Ready Warm 8200 Bladeless and Ready Warm 8400 Bladeless Connected heaters. These products are designed for primary heating purposes only in well-insulated spaces or for occasional use.
Safety Instructions
Read all instructions carefully before use. Ensure the mains voltage matches the appliance's rating label and the outlet is grounded. Do not cover air inlet/outlet openings and maintain a minimum distance of 0.5m from walls and objects. Never insert objects into ventilation openings to prevent electric shock, fire, or damage. Avoid dusty environments and placing the appliance near heat sources, flammable substances, or wet surfaces. Do not immerse the cord, plug, or any part of the appliance in water or other liquids. Ensure hands are dry before handling the plug. Do not place the appliance under a socket-outlet or in bathrooms, laundry areas, or other humid locations. Always turn off and unplug the appliance when not in use or before moving it. Pull the plug, not the cord, to disconnect. Avoid extension cords as they may overheat. The appliance contains hot parts; do not use in areas with gasoline, paint, or flammable liquids. Keep remote control batteries away from children; seek medical advice if swallowed. Batteries should not be recharged, dismantled, thrown into fire, or short-circuited. Children under 8 should not use the appliance; children aged 8 and above can use it under continuous supervision. Persons with reduced capabilities can use it under supervision and with proper instruction.
Parts and Components
The heater consists of a housing, air outlet, display, base, and safety push button. The rear includes a filter and a power switch. The remote control has buttons for On/Off, Mode, Temperature Increase, Timer, Temperature Decrease, and Oscillation.
Before Use
Remove the product from its packaging and check for any visible damage. If damage is found, contact Cecotec Technical Support. Place the heater on a flat, stable surface. Set the power switch to "0" and plug into an earthed power supply. A slight odor may be present during the first few minutes of use or after storage, which is normal and will disappear.
Operation
The device can be operated via the control panel or the remote control. The power switch is located on the back. The control panel features buttons for Oscillation, Mode/On/Off, Timer, and Temperature. The remote control duplicates these functions.
Oscillation: Press to activate/deactivate oscillation. The indicator light will turn on, and airflow will move left to right.
Mode/On/Off: Press once to turn on. Press again to cycle through Fan, Low, and High modes. The corresponding light will be steady. To turn off, press until Fan mode is selected, the light flashes, and a 30-second countdown appears on the display.
Timer: Press repeatedly to set operating time in 1-hour intervals, from 1 to 12 hours. The display shows remaining time. Press repeatedly to cancel timer (display shows "00").
Temperature: Press repeatedly to increase room temperature from 15 to 40°C. Digits flash for 3 seconds, then display shows ambient temperature. The device automatically switches modes when the set temperature is reached.
Safety Feature: A safety push button on the base automatically disconnects the unit if accidentally tilted.
Remote Control Batteries: The remote uses a Lithium Button Cell Battery (CR2025). If unresponsive, replace the battery following the instructions: turn remote upside down, slide tab A to the right, remove battery tray B, insert new battery ensuring positive side is up.
Mobile App (for 05371 model): Download the EnergySilence app. Register or sign in. Select "ReadyWarm Bladeless". Turn on the device until a beep and flashing LED. Enter Wi-Fi password (2.4 GHz network). Linking starts automatically. If it fails, repeat steps with slow blinking LED. Follow app instructions for manual linking.
Cleaning and Maintenance
Turn off, unplug, and let the appliance cool before cleaning. Do not use abrasive cleaners. Use a soft, damp cloth for the exterior. Be careful not to touch heating elements. Periodically clean dust/fluff from air vents by vacuuming. Store in a dry, safe place if unused for a long period. To remove the filter, press rear tabs, remove protective grille, shake out, and clean with a cloth. Do not wash the filter.
Troubleshooting
No Power: Check power cord connection, outlet power, and rear power switch. Ensure it's in the "On" position.
Unusual Odor: New units may emit a slight odor from the fan motor during first use, which dissipates within a week.
Vibrations/Noise: Ensure the unit is on a flat surface. Place an anti-vibration mat underneath if necessary. If damaged, discontinue use and contact Cecotec Technical Support.
Technical Specifications
Model: ReadyWarm 8200 Bladeless, Reference: 05370, Power: 1500 W, Voltage: 220-240 V~/50-60 Hz
Model: ReadyWarm 8400 Bladeless Connected, Reference: 05371, Power: 1500 W, Voltage: 220-240 V~/50-60 Hz
Disposal of Old Electrical Appliances
Follow European directive 2012/19/EU (WEEE) for separate collection and recycling of electrical appliances to minimize environmental impact. Remove batteries before disposal. Contact local authorities for proper disposal information.
Warranty and Technical Support
The product has a 2-year warranty from the date of purchase, provided proof of purchase is submitted and the product is used correctly. Warranty does not cover misuse, damage from liquids, unauthorized repairs, or normal wear and tear. Contact Cecotec Technical Support Service at +34 963 210 728 for any issues or queries.
