Schneider Electric Altivar Soft Starter ATS480 DTM Library V1.1.10

1. Package Content

2. Features

• Support of firmware V1.1IE02_B09.
• Altivar Soft Starter ATS480 device reference topology for device supports from 17A to 1200A references.
• My Device tab provides detailed device characteristics.
• My Dashboard tab provides monitor device parameters in a single screen where user can select additional parameters according to application.
• Parameter list tab provides all configuration parameters to configure the application in ATS480.
• Diagnostics tab provides detailed Error and warning information configuration settings for troubleshooting.
• Display tab provides detailed monitoring of different parameters groups from ATS480.
• Device function provides various device functions such as Modify topology, Control panel, Factory settings, Import/Export Configuration, Backup/Restore Device, etc. to configure ATS480.
• Import and Export feature helps the user to save ATS480 configuration file in .cfg format.
• DTM online help for users to refer, ATS480 configuration settings.
• Support for Import and Export of Backup image file (*.bki).
• Support for Import and Export of SECP file (*.secp).
• Enable user to set security profile when device is in root state (Factory state).
• Admin options tab to configure California Law Cyber security configuration settings.
• As part of the California CS Law compliance (IEC-62443-4-2 CR 1-1 Human user identification and authentication), the DTM comes with a new set of features meant to provide a more secured connection to the device over Modbus TCP (only applies to Ethernet and Modbus Serial Fieldbus).
• User authentication will be required at every attempt to connect to the device. Note: this mechanism is by default enabled but the user can still disable it if required.
• A default password is provided by the factory setting (available in the Keypad), however the user will be requested at each authentication attempt, to define a different and secured password (according to a customizable password policy). It remains possible to keep the default password temporarily, but the same reminder will pop up over again during next connection attempts.
• User authentication can be enabled/disabled and the Password policy can be modified from the Admin options node of the considered fieldbus.
• Note: For legacy option card (EthernetIP/ModbusTCP), User authentication and Password Policy configuration will be deactivated since they are not supported by these version of cards.

3. Change Log

3.1 What's new in V1.1.10

• Help Manual Integration for all the Language Supported.
• Parameter visibility.
• Language Packs.
• Support of Excel/PDF/Txt export functionality.
• Save Restore Configuration.

3.2 What's new in V1.1.4

• Help Menu Attachment for the Option Modules.
• Bug Fixes.

3.3 What's new in V1.1.1

• First Version.

4. System Requirement

4.1 Supported operating systems

This software can be installed on the following operating systems:

• Microsoft Windows 7 32/64-bit.
• Microsoft Windows 8.1 32/64-bit.
• Microsoft Windows 10.0 32/64-bit.

4.2 Minimum PC Requirements

4.3 Recommended PC Requirements

5. Some restrictions which we are working on

• All the Labels are not Translated when Language Pack is installed.

6. Container Supported

• SoMove V2.9.2 and above
• EcoStruxure Control Expert V15.2
• M&M FDT Container V4.6.19323.2

7. Altivar Soft Starter DTM in Control Expert

7.1 Versions Provided & Compatibility

7.2 Known issues or Observations:

• NA