How to encrypt my wireless network?
Supported Models
This guide is suitable for the following TOTOLINK models:
N100RE, N150RH, N150RT, N151RT, N200RE, N210RE, N300RT, N300RH, N300RU, N301RT, N302R Plus, N600R, A702R, A850, A800R, A810R, A3002RU, A3100R, T10, A950RG, A3000RU
Application Introduction
TOTOLINK routers provide a repeater function, enabling users to expand wireless coverage and allow more terminals to access the Internet.
Steps to Encrypt Your Wireless Network
STEP-1: Access the Router Interface
Connect your computer to the router via cable or wireless. Then, log in to the router by entering http://192.168.0.1 into your browser's address bar.
[←][↻][⌂][?]192.168.0.1[→]
Note: The default access address may vary depending on the specific situation. Please refer to the product's bottom label for the correct address.
STEP-2: User Login
User Name and Password are required. By default, both are admin in lowercase letters. Click LOGIN.
STEP-3: Navigate to Wireless Setup
Click `Wireless Settings` -> `Wireless Setup` on the left-hand menu.
Left Menu Navigation:
- Status
- Operation Mode
- Network
- IPv6 Network
- Wireless
- Basic Settings
- Multiple SSID 1
- Multiple SSID 2
- Multiple SSID 3
- Multiple SSID 4
- Advanced Settings
- WDS Settings
- Access Control
- WPS Settings
- Wireless Schedule
STEP-4: Configure Basic Wireless Settings
In this interface, you can now encrypt your network.
Basic Settings
| Setting | Value |
|---|---|
| SSID | TOTOLINK [▼] |
| Broadcast SSID | Enabled [▼] |
| Encryption | WPA2 [▼] |
| Limit Client AP(3-64) | 64 |
| Download | 0 Mbps (0:Unlimit) |
| Upload | 0 Mbps (0:Unlimit) |
| Authentication Mode | |
| WPA2 Cipher Suite | |
| Pre-Shared Key Format | Passphrase [▼] |
| Pre-Shared Key | 88888888 |
Security Recommendations
WEP (Open System, Shared Key), WPA-PSK, WPA2-PSK, and WPA/WPA2-PSK are provided for your security. WPA/WPA2-PSK is recommended.
Available Encryption Options:
- WPA2-Mixed
- WPA2
- WPA
- WEP
- Disabled
