LED Strip with Motion Sensor
Item: 64484
Specifications
| LED strip length | 1 m (8 mm wide) |
| Cable length | 0.5 m |
| Size battery compartment | 135 x 26 x 17 mm |
| Lumen | 110 lm |
| Colour temperature | 3000-3300 K |
| Batteries | 4x AAA |
| Battery time | About 20 hrs |
| Motion detection range | Up to 6.5 m |
Use
Insert 4x AAA batteries in the battery compartment. Mind the polarity.
Plan beforehand where to attach the strip. Peel off the 3M tape from the strip and the battery compartment and carefully attach them to the chosen place.
Note: Only for indoor use.
Diagram Description: The battery compartment is illustrated, showing space for four AAA batteries with clear polarity markings (+/-) to ensure correct insertion.
Motion Sensor
Set the switch to "D" to activate the motion sensor. When the sensor detects motion, the LED strip lights up for 35 seconds.
Set the switch to "M" to manually turn the strip on and off.
Diagram Description: The motion sensor unit is shown with a main switch labeled "On/Off" and "Sensor". A secondary switch is labeled "D" (for motion detection) and "M" (for manual operation).
