Vegue VS-0866 Portable Bluetooth Speaker
Instruction Manual
Troubleshooting Guide
| Common Problems | Possible Cause | Solution |
|---|---|---|
| No sound when power is on | 1. No input source. 2. The main volume is at the minimum position. |
1. Use better music signals. 2. Adjust the volume appropriately. |
| Distortion of sound | 1. Volume is adjusted to max. 2. Speaker may be damaged. |
1. Turn down the main volume. 2. Check if the speaker is damaged. If so, it needs to be repaired. |
| Mic is silent | 1. The microphone switch is not on. 2. Mic volume is at 0 position. 3. Low battery of wireless microphone. |
1. Turn on the microphone switch. 2. Adjust the microphone volume appropriately. 3. Replace the wireless microphone battery. |
| MP3 is silent | 1. USB song format is wrong. 2. Improper operation leads to procedural chaos. 3. The USB/TF card is not inserted properly. |
1. Convert the format to MP3. 2. Restart the machine. 3. Unplug and re-plug the USB/TF card. |
Main Technical Specifications
- Output power: <30W
- Input sensitivity: 320 mV
- SNR: >71 dB
- Frequency response: 60 Hz - 20 KHz
- Power supply: AC 100-240V ~, 60Hz/50Hz
Note: Specifications are for reference only and are subject to change without prior notification due to continuous product improvement.
Common Function Description
- Vol: Adjust volume
- Treble: Adjust treble
- Bass: Adjust bass
- Mic Vol: Adjust microphone volume
- Echo: Adjust Echo
- Mic: Wired microphone input
Product Features
This system is compatible with PC, DVD, VCD, MP3, Electronic piano, and any device with an audio output.
The amplifying circuit is designed for high performance and high fidelity, featuring a professional, high-quality speaker for clear soundstage positioning and layering.
The system offers outstanding voice effects, with surging bass, strong and bright mid-tones, and crisp, pleasant treble.
A professional electronic frequency division circuit ensures accurate division points and better sound effects.
The use of professional-grade, large-capacity batteries and audio power supply capacitors provides greater local power reserve, stability, dynamic range, and higher SNR.
Charging Instructions
Connect a matched power adapter to AC 100-240V for charging. Charging time is approximately 6 to 8 hours. Unplug the power supply once fully charged, as leaving a full battery on charge may cause damage.
Battery Charge Indicator: The LED panel displays battery status. Four horizontal lines in the battery shape indicate 25% of remaining electricity each. If no lines are visible or the shape flashes, power off and charge promptly to avoid battery damage.
When charging, the indicator on the back of the speaker flashes and stops blinking when fully charged. Continue charging for 1-2 hours to extend battery life.
Warning: If the battery is under voltage, charge it fully within 48 hours. If the speaker will be unused for a long time, ensure the battery is fully charged to prevent damage.
Keep the unit away from high temperatures, strong magnetic fields, and high frequencies during playback. If the system fails to work, turn off the power or remove and reinsert the USB disc/TF card to resume play.
Remote Control Instructions
The remote control should be used within approximately 20 feet and 30 degrees from the remote reception window. Point the remote at the machine's receiver window, ensuring no obstacles are present.
If the receiving window is exposed to strong light, the remote may fail. Move the machine to avoid direct strong light exposure.
Do not mix new and old batteries. Regularly check and replace remote control batteries as needed.
Remote Control Functions:
- 1. Mute
- 2. Music number
- 3. Input selection
- 4. Volume up
- 5. Play/Pause
- 6. Next
- 7. Volume down
- 8. USB
- 9. Sound field effect
- 10. Play the record
- 11. Record
- 12. Bluetooth
- 13. Previous
- 14. MIC priority
- 15. Repeat one/Random/Repeat all
Description of Controls (On Speaker)
- DC 15V IN
- Power
- Microphone input
- Adjust microphone volume
- Echo
- Volume
- Bass volume
- USB interface
- Treble volume
- TF interface
- Guitar Volume
- Audio output
- Audio input
- Guitar input
- Microphone priority
- Input selection
- Recording/Recording playback
- PREV
- NEXT
- LED light control
- Play/Pause
- Play on loop
Guitar Input
- Guitar jack: Connect guitar.
- Guitar Volume: Adjust the guitar volume.
USB/TF Card Usage
Music files on USB and TF cards should be formatted as FAT32. Playback order is based on file names (e.g., "01", "02", "03").
Copy MP3 or WMA music files to USB/TF cards. It is recommended to delete unnecessary files and folders to improve card reading speed and reduce potential issues.
Microphone Controls and Basic Operation
- 1. Microphone on
- 2. Microphone off
- 3. Screen
Recording Function
Insert a USB or TF card, then press the record button [REC] to enter recording mode. The first time recording, a "RECORD" folder will be created on the card, storing recordings named REC0001, REC0002, etc.
Press [REC] to pause and resume recording. Press INPUT or [REC] to exit recording mode.
Press [REC] again to enter recording playback mode, which plays the most recent recording first. Use PREV [◀◀] or NEXT [▶▶] to select recordings. The Replay button on the remote can be used to replay single or all recordings.
USB/TF Port Functionality
Insert a USB or TF card to play music. Supports MP3, WMA, and WAV formats with high-fidelity stereo sound.
INPUT: Switches between external audio, MP3, and Bluetooth functions.
Play/Pause [▶||]: Pauses music playback; press again to resume.
PREV [◀◀] / NEXT [▶▶]: Selects previous or next track during playback.
Bluetooth Connection Method
Turn on the speaker and press the 'INPUT' key until 'bT' or 'BLUE' is displayed. Connect your phone via Bluetooth. The Bluetooth name is VS-0866.
If connection fails, restart the device or phone and try again. The effective Bluetooth range is 32 feet in an open area.
FM Function
Select 'INPUT' to switch to FM radio mode.
Press the auto-search button [▲] to search and save stations.
Use the channel selection buttons [▲] and [▼] to switch between stations.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If interference occurs, try the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a different circuit than the receiver.
- Consult the dealer or an experienced radio/TV technician.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Radiation Exposure Statement:
For wireless microphone: This device complies with RF radiation exposure limits for an uncontrolled environment. It must not be co-located or operated with any other antenna or transmitter.
For Portable speaker: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Install and operate with a minimum distance of 20 cm between the radiator and your body.
OTHAYOTH - Website Under Construction
