VEGue VS-6633 Portable Bluetooth Speaker System
Instruction Manual
Trouble Shooting Guide
| Common Problems | Possible Cause | Solution |
|---|---|---|
| There is no sound when power is on | 1. No input source. 2. The main volume is at the minimum position. | 1. Use better music signals. 2. Adjust the volume appropriately. |
| Distortion of sound | 1. Volume is adjusted to max. 2. Speaker may be damaged. | 1. Turn down the main volume. 2. Check whether the speaker is damaged or not. If it is, it needs to be repaired. |
| Mic is silent | 1. The microphone switch is not on. 2. Mic volume is at 0 position. 3. Low battery of wireless microphone. | 1. Turn on the microphone switch. 2. Adjust the microphone volume appropriately. 3. Replace the wireless microphone battery. |
| MP3 is silent | 1. USB song format is wrong. 2. Improper operation leads to procedural chaos. 3. The USB/TF card is not inserted properly. | 1. Convert the format to MP3. 2. Restart the machine. 3. Unplug and re-plug into the USB/TF card. |
Main Technical Specifications
Output power: 200W
Input sensitivity: 500±30mV
SNR: >65dB
Frequency response: 70Hz~20KHz
Power supply: DC 15V
*Above specifications are the specifications of the sampling machine and are for reference purpose only.
*Because of continuous product improvement, specifications will keep changing at any time without prior notification.
Common Function Description
- Vol: Adjust volume
- Treble: Adjust treble
- Bass: Adjust bass
- Mic Vol: Adjust microphone volume
- Echo: Adjust echo
- Mic: Wired microphone input
Product Features
This system can be used with PC, DVD, VCD, MP3, Electronic Piano and any device with audio output.
The amplifying circuit is designed with high performance and high fidelity, and equipped with professional and high quality speaker, it can make the sound field positioning clear and layered.
The system voice effect is outstanding, the bass is surging and shocking, the middle tone is strong and bright, the treble is crisp and pleasant.
Professional electronic frequency division circuit, so that the division point of the machine more accurate, better effect.
The use of professional design and manufacture of large capacity batteries, as well as audio power supply capacitor makes the local power reserve margin more larger, more stable, better dynamic, higher SNR.
Charging Instructions
When charging, use the power transformer that comes with the package to connect AC 100V ~ 240V voltage for charging. The charging time should be 6~8 hours. After being fully charged, unplug the power supply to avoid damage to the battery due to long-term charging.
Battery Level Indicator: There is a battery level indicator on the display. When the battery power is too low, the battery indicator icon will flash, please charge it in time. The [red-light] on the display will light up when charging, and the [blue-light] on the display will light up when fully charged.
Note: If the battery is used out, please recharge the battery within 48 hours. Do not leave the empty battery for a long time, otherwise the battery will be damaged.
Remote Control Instructions
The remote control operates within approximately 20 feet (6 meters) and a 30-degree angle from the receiver window. Ensure no obstacles are present. Avoid strong direct light on the receiver window. Do not mix old and new batteries; check battery status regularly.
Remote Control Buttons:
- Mute [mute]
- Music number
- Input selection [input]
- Vol + [vol+]
- Next [next]
- Vol - [vol-]
- MIC menu [mic-menu]
- Playback [playback]
- Next EQ mode [eq-mode]
- Previous EQ mode [eq-mode]
- Reset [reset]
- Guitar VOL- [vol-]
- Next LED mode [led-mode]
- Previous LED mode [led-mode]
- MIC VOL- [mic-vol-]
- MIC VOL+ [mic-vol+]
- Guitar VOL+ [vol+]
- Record [record]
- Karaoke mode [karaoke]
- Menu [menu]
- Previous [prev]
- Play/Pause [play/pause]
- MIC priority [mic-priority]
- Repeat one/Random/Repeat all [repeat]
Description of Controls (Speaker Unit)
Visual Description: The speaker unit features a control panel on top and various input/output ports on the back or side. The top panel includes input ports for DC 15V IN (compatible with 12V external battery), TF Interface, USB Interface, Guitar Input, Microphone Input, and an Audio Input which also serves as a reset button when a needle (over 2 inches) is inserted. The main control panel features buttons for Menu [menu] (accessing Bass, Treble, Echo, Delay, Mic Volume, Guitar Volume, LED modes), Karaoke Mode [karaoke] (switching between Original, Accompaniment, Follow), Recording [record] (single press to record, long press to play), Power [power] (long press), Volume [vol], Input Selection [input], Previous [prev], Next [next], and Play/Pause [play/pause].
Guitar Input
Connect guitar to the Guitar jack. Adjust guitar volume using the Guitar Volume control.
USB/TF Function
Music files on USB and TF cards must be FAT32 formatted. Playback order is determined by file name sequence (e.g., "01", "02"). Copy MP3 or WMA files. It is recommended to delete unnecessary files and folders for faster reading.
Microphone Controls and Basic Operation
Visual Description: The wireless microphone features an ON/OFF switch and a small screen [screen] to indicate its status.
- Microphone on [mic-on]
- Microphone off [mic-off]
- Screen [screen]
Recording Function
Insert USB or TF card, then press [play/pause] to start recording. A "RECORD" file will be created, saving recordings as REC0001, REC0002, etc. Press [play/pause] to pause/continue. Press INPUT or [play/pause] to exit recording. Press [play/pause] to enter recording playback mode, playing the last recorded music first. Use [prev] or [next] to select music. Use Replay on the remote to replay.
Play Function
Insert USB or TF card to play music. Supports MP3, WMA, WAV formats for high-fidelity stereo sound.
- INPUT [input]: Switches between external audio, MP3, and Bluetooth.
- [play/pause]: Pauses or continues music playback.
- [prev]/[next]: Selects previous or next music track.
Bluetooth Operation
Connection Method: Turn on the speaker, press the INPUT [input] button until 'bT' is displayed. Connect your phone via Bluetooth; the device name is VS-6633. If connection fails, restart the device or phone. Bluetooth range is up to 32 feet (approx. 10 meters) in open areas.
