VeGue VS-1088 Portable Bluetooth Speaker
Instruction Manual
Troubleshooting Guide
| Common Problems | Possible Cause | Solution |
|---|---|---|
| There is no sound when power is on | 1. No input source. 2. The main volume is at the minimum position. | 1. Use better music signals. 2. Adjust the volume appropriately. |
| Distortion of sound | 1. Volume is adjusted to max. 2. Speaker may be damaged. | 1. Turn down the main volume. 2. Check whether the speaker is damaged or not. If it is, it needs to be repaired. |
| Mic is silent | 1. The microphone switch is not on. 2. Mic volume is at 0 position. 3. Low battery of wireless microphone. | 1. Turn on the microphone switch. 2. Adjust the microphone volume appropriately. 3. Replace the wireless microphone battery. |
| MP3 is silent | 1. USB song format is wrong. 2. Improper operation leads to procedural chaos. 3. The USB/TF card is not inserted properly. | 1. Convert the format to MP3. 2. Restart the machine. 3. Unplug and re-plug the USB/TF card. |
Main Technical Specifications
| Output power | 200W |
| Input sensitivity | 500 ± 30mV |
| SNR | ≥75dB |
| Frequency response | 50Hz~20KHz |
| Power supply | DC 15V |
*Above specifications are for the sampling machine and are for reference purpose only. Specifications are subject to change at any time without prior notification due to continuous product improvement.
Common Function Description
- VOLUME: Adjust volume
- TREBLE: Adjust treble
- BASS: Adjust bass
- MIC VOL: Adjust microphone volume
- ECHO: Adjust echo
- MIC INPUT: Wired microphone input
Product Features
This system can be used with PC, DVD, VCD, MP3, Electronic Piano, Radio, and any device with audio output.
- The amplifying circuit is designed with high performance and high fidelity, equipped with professional, high-quality speakers for clear and layered sound positioning.
- Outstanding system voice effect with surging bass, strong and bright mid-tones, and crisp treble.
- Professional electronic frequency division circuit for accurate division points and better effect.
- Uses professionally designed, large-capacity batteries and audio power supply capacitors for larger local power reserve, stability, better dynamics, and higher SNR.
Charging Instructions
Use the provided power transformer to connect to AC 110V ~ 240V voltage for charging. Charging time is 5-8 hours. Unplug the power supply after fully charged to avoid battery damage from prolonged charging.
Battery Level Indicator
A battery level indicator is present on the display. When the battery power is too low, the indicator icon will flash, signaling the need for charging. A red light on the display indicates charging, and a blue light indicates a full charge.
Note: If the battery is depleted, please recharge it within 48 hours. Do not leave the battery empty for extended periods, as this can cause damage.
Speaker Image Description
The speaker is a vertical, portable Bluetooth speaker with a prominent LED light display in the center, featuring a disco ball-like element at the top. The VeGue logo is visible.
Remote Control Instructions
The remote control should be used within approximately 20 feet (6 meters) and a 30-degree angle from the machine's remote reception window. Ensure no obstacles are between the remote and the machine. Avoid strong direct light on the reception window, as it may affect performance. Do not mix new and old batteries, and check for replacement needs regularly.
Remote Control Functions:
- Power on/off
- Mode switch
- Mute
- Next/Previous track
- Volume adjust
- Repeat one/Repeat all
- FM station search
- Music number selection
- EQ mode
- Play/Pause
Description of Controls (Unit and Remote)
Unit Controls and Inputs:
The unit features a digital display and various input/output ports.
- LED digital display
- Microphone priority: Long press for 3 seconds or more to select single loop or random playback.
- USB/TF slot: For inserting USB drives and TF cards.
- Music volume control
- 3.5mm Aux input
- Music bass control
- Music treble control
- Microphone echo control
- Microphone volume control
- Charging lamp indicator
- Wired microphone input (MIC INPUT)
- AC input for power
- Audio input (AUX)
- Guitar volume control
- Guitar input (GT.IN)
- Power switch
- LED lamp switch
- DC 12V power socket
Remote Control Functions (Detailed):
- Power on/off: Turns the unit on or off.
- MODE: Switches between audio sources (USB, Bluetooth, Radio, AUX).
- MUTE: Mutes the audio output.
- Next/Previous: Selects the next or previous track/channel.
- Volume adjust: Controls the overall volume.
- Repeat one/Repeat all: Sets the repeat mode for playback.
- FM station search: Searches for FM radio stations.
- Music number: Directly select music tracks by number.
- EQ mode: Selects different equalization modes.
- Play/Pause: Controls playback of music.
- REC: Inserts a storage medium and presses the button to record.
- ACCOMPANY: Activates accompaniment mode.
- TWS: Bluetooth Synchronization. When two devices with TWS function and the same Bluetooth name are connected, long-pressing the TWS button on one unit synchronizes them for stereo sound.
Guitar Input
GT.IN: Connect a guitar to this input.
GT.VOL: Adjust the guitar volume.
USB/TF Card Usage
Music files on USB and TF cards should be formatted as FAT32. The playback order is based on file names (e.g., "01", "02", "03"). Copy MP3 or WMA music files to USB/TF cards. It is recommended to delete unnecessary files and folders to speed up card reading and reduce potential issues.
Microphone Controls and Basic Operation
The microphones are pre-paired at the factory. If a microphone is not working, follow these steps:
How to pair with mic?
- Turn on the microphone. Hold down the 'Set' button for 3 seconds to adjust frequency.
- Aim the microphone's screen (labeled '3' in diagrams) at the machine's circular infrared receiving area.
- Wait 4-5 seconds for pairing to complete. Test the microphone connection.
- If pairing fails, try changing the frequency or contact customer support for assistance.
Microphone Controls:
- Mic on/off switch
- Set button (for frequency adjustment)
- Screen (displays frequency/status)
Recording Function
Insert a USB or TF card and press the "REC" button to enter recording mode. The first time recording, a "RECORD" file will be created on the card, storing all recordings. Files are automatically named sequentially (e.g., REC0001, REC0002). Press "REC" to pause and again to resume recording. Press "MODE" or "REC" to exit recording mode.
Pressing "REC" again enters recording playback mode, playing the last recorded music first. Use PREV (◀️) or NEXT (▶️) to select recordings. The 'Replay' button on the remote can be used to replay music, either single tracks or all.
Play Function
USB/TF CARD: Insert a USB drive or TF card to play music. Supports MP3, WMA, and WAV formats for high-fidelity stereo sound.
MODE: Switches between external audio, MP3, Bluetooth, and Radio functions.
[Play/Pause] (▶️||): Pauses music playback; press again to resume.
[Previous/Next] (◀️ / ▶️): Selects the previous or next music track.
Bluetooth Operation
Connection Method: Turn on the speaker and press the 'MODE' key on the speaker panel until 'bLUE' is displayed. Use your phone to search for and connect to the Bluetooth device named "VS-1088".
If the connection fails, restart the speaker and your phone, then try again. The effective Bluetooth range is up to 32 feet (10 meters) in open areas.
