EVO Lite Series Multi-channel Charger Guidelines

Product Introduction

The EVO Lite Series multi-channel charger expands the battery interface, allowing for the charging of up to three EVO Lite batteries simultaneously when used with the standard EVO Lite adapter. This device is designed to streamline the charging process for your drone batteries.

Product Use

To use the multi-channel charger, first connect the EVO Lite standard adapter to a power socket (100-240V). Then, plug the charging connector into the multi-charger's power port. Insert the aircraft batteries into the battery ports to begin charging. The indicator light will flash cyclically during charging and will turn off once all batteries are fully charged.

Product Features

The charger features advanced charge management with sequence charging. It prioritizes charging the battery with the highest remaining power. Once a battery reaches full charge, it automatically proceeds to charge the next battery with the highest power. In this mode, only one battery is charged at a time. Please unplug the battery once it is fully charged. Note that inserting a new battery may interrupt the charging of a currently charging battery.

Specifications

Operating Voltage: 12.75V
Operating Temperature: 5-45°C (41-113°F)
Reference Charging Time (3 Batteries): 4.5 hours

Disclaimer

Autel Robotics is not responsible for any damage or injury caused by improper use of this product. Improper use includes, but is not limited to, using unauthorized chargers or batteries, short-circuiting, overheating, inserting foreign objects, or touching terminals with hands or metal. For more information, refer to the disclaimer, safe operation guide, quick start guide, and user manual.

The copyright of this product and manual belongs to Autel Robotics. No part of this product or manual may be copied without prior written consent.

Warning

The multi-charger is only applicable to the extended battery interface and requires the EVO Lite standard adapter for power.
It is designed exclusively for EVO Lite series drone batteries. Do not use it for other battery models.
Place the multi-charger steadily during use and ensure proper insulation.
Avoid touching the metal terminals with hands or other objects.
If foreign matter is attached to the metal terminals, wipe them clean with a dry cloth.

	EVO Lite Series Multi-channel Charger Guidelines Official guidelines for the Autel Robotics EVO Lite Series Multi-channel Charger, detailing its features, safe usage instructions, and specifications for charging multiple EVO Lite drone batteries.
	Autel EVO Nano Multi-channel Charger Guidelines \| User Manual Comprehensive guidelines and specifications for the Autel EVO Nano multi-channel charger. Learn how to safely charge up to three EVO Nano drone batteries with this user manual from Autel Robotics.
	Autel EVO II Series Battery Multi-charger Guidelines Comprehensive guidelines for the Autel EVO II Series battery multi-charger, covering product introduction, usage, charging modes, status indicators, and specifications.
	Autel EVO II DUAL 640T Packing List Detailed packing list for the Autel EVO II DUAL 640T drone, outlining all included components such as aircraft, remote controller, propellers, batteries, chargers, and accessories.
	Autel EVO Lite Series Quick Start Guide Get started quickly with your Autel Robotics EVO Lite Series drone. This guide covers aircraft and remote control setup, flight preparation, and basic controls for safe and efficient operation.
	Autel Robotics EVO II RTK Series Packing List Detailed packing list for the Autel Robotics EVO II RTK Series drone, outlining all included components and accessories.
	Autel EVO II Series Battery Safe Operation Guidelines Comprehensive safety, usage, charging, and storage guidelines for Autel EVO II Series drone batteries. Learn about battery protection features and specifications.
	Autel Smart Controller Quick Start Guide This guide provides essential information for setting up and operating the Autel Smart Controller, including its features, layout, power management, safety precautions, and basic flight controls. Learn how to connect, charge, and prepare your controller for flight with Autel Robotics.