EVO Lite Series Multi-channel Charger Guidelines

Disclaimer

Thank you for purchasing the EVO Lite™ battery multi-channel charger (referred to as "multi-charger"). Please read this statement carefully before using this product. Once this product is used, it is deemed to be an approval and acceptance of the entire content of this document. Please use this product strictly in accordance with this manual, and be sure to pay attention to warnings.

Autel Robotics is not responsible for any damage or injury caused directly or indirectly by improper use of this product. This includes, but is not limited to, using an unauthorized charger, charging an unauthorized battery, short-circuiting, overheating, inserting foreign objects into the product, touching terminals with hands or metal, etc. Please refer to the disclaimer and safe operation guide, quick start guide and user manual for related information not covered in this article.

The copyright of this product and manual belongs to Autel Robotics, and all rights are reserved. Without the prior written consent or authorization of Autel Robotics, no part of this product and manual may be copied in any form.

Warning

⚠️ Multi-charger is only applicable to the extended battery interface, please use the EVO Lite standard adapter to supply power for it.
⚠️ Multi-charger is only applicable to EVO Lite series drone batteries.
⚠️ Do not use multi-charger to charge other types of batteries.
⚠️ When using, please place the multi-charger steadily and pay attention to the insulation.
⚠️ Do not touch the metal terminals with your hands or other objects.
⚠️ If foreign matter is attached to the metal terminal, please wipe it with a dry cloth.

Product Introduction

Multi-charger can expand the battery interface to be multiple. It can be used with the EVO Lite standard adapter, which can connect up to 3 EVO Lite batteries for charging.

?️ 1 Battery port
? 2 Power port

Product Use

1. Connect the power supply

Connect the EVO Lite standard adapter to the power socket (100-240V), and then plug the charging connector into the power port of the multi-charger.
2. Charge

Insert the aircraft battery into the battery port to start charging. Once inserted, the indicator light will begin to flash cyclically. When all the batteries are fully charged, the indicator light will be off.

Product Features

Charge management

Sequence charging: Priority is given to charging the battery with the highest amount of power remaining, and when it reaches full charge, it will continue to charge the next battery with the highest power. In sequence charging mode, only one battery will be charged at a time.

Please unplug once the battery is fully charged. Note: Inserting the battery may interrupt the battery being charged.

Specifications

Operating Voltage	Operating Temperature	Reference Charging Time (3 Batteries)
.V		.hours

	EVO Lite Series Multi-channel Charger Guidelines This document provides guidelines for the EVO Lite Series multi-channel charger, detailing its product introduction, usage, features, and specifications. It covers charging management, operating voltage, temperature, and charging times.
	Autel EVO Nano Multi-channel Charger Guidelines \| User Manual Comprehensive guidelines and specifications for the Autel EVO Nano multi-channel charger. Learn how to safely charge up to three EVO Nano drone batteries with this user manual from Autel Robotics.
	Autel EVO II DUAL 640T Packing List Detailed packing list for the Autel EVO II DUAL 640T drone, outlining all included components such as aircraft, remote controller, propellers, batteries, chargers, and accessories.
	Autel EVO II Series Battery Multi-charger Guidelines Comprehensive guidelines for the Autel EVO II Series battery multi-charger, covering product introduction, usage, charging modes, status indicators, and specifications.
	Autel EVO Lite Series Quick Start Guide Get started quickly with your Autel Robotics EVO Lite Series drone. This guide covers aircraft and remote control setup, flight preparation, and basic controls for safe and efficient operation.
	Autel Robotics EVO II RTK Series Packing List Detailed packing list for the Autel Robotics EVO II RTK Series drone, outlining all included components and accessories.
	Autel EVO II Series Battery Safe Operation Guidelines Comprehensive safety, usage, charging, and storage guidelines for Autel EVO II Series drone batteries. Learn about battery protection features and specifications.
	EVO Max 4T Maintenance Manual: Autel Robotics Drone Care and Service Guide Comprehensive maintenance manual for the Autel Robotics EVO Max 4T drone, covering pre-flight checks, component inspection, battery care, calibration, and after-sales service. Ensure optimal performance and longevity of your drone.