JLab Talk GO USB Microphone

Setup Instructions

1. Step 1: Connect the Microphone

   Connect the USB-C cable to the JLab Talk GO microphone. Connect the USB-A end of the cable to a USB port on your computer (Windows PC or Mac).

   Diagram Description: A JLab Talk GO microphone is shown with a USB-C cable plugged into its port. The other end of the USB-C cable, a USB-A connector, is plugged into a computer's USB port.

2. Step 2: Verify Connection

   Adjust your computer's settings to ensure the connection is established. Your computer should recognize the JLab Talk GO microphone.

   Diagram Description: A computer screen displays sound input device settings. The JLab Talk GO microphone is shown connected to the computer, and its icon is highlighted with a green checkmark, indicating it is selected and active as the audio input device.

3. Step 3: Configure Audio Settings

   For Windows (7, 8, or 10):

   1. From the Start Menu, select "Control Panel".
   2. In the Control Panel, select the "Sound" icon.
   3. Go to the "Recording" tab and select "JLab Talk GO" as your default recording device.
   4. Go to the "Playback" tab and select "JLab Talk GO" as your default playback device.

   For Mac (macOS 10.10 or Newer):

   1. Open "System Preferences" and select the "Sound" icon.
   2. Select the "Input" tab and choose "JLab Talk GO".
   3. Select the "Output" tab and choose "JLab Talk GO".
   4. Adjust the desired volume level from this screen.

Microphone Controls and Features

Microphone Overview

The JLab Talk GO features several controls and connection points:

• Volume Control Knob: Located on the bottom of the microphone for adjusting audio input levels. ?️
• Mute Button: Located on the top of the microphone. A quick press toggles mute on/off. ??
• USB-C Input: The primary port for connecting the microphone to your computer for power and audio. ?
• 3.5 MM AUX Output: For connecting headphones to monitor your audio. ?
• LED Controls: Located on the front, indicating status.

Diagram Description: A detailed view of the JLab Talk GO microphone highlights its key components: the Volume Control Knob on the bottom, the Mute Button on top (marked with a microphone icon), the USB-C Input Port on the back, the 3.5mm AUX Output Port on the back, and LED Controls on the front.

Usage Modes and Tips

Polar Patterns

The JLab Talk GO offers different pickup patterns for various recording scenarios:

• Cardioid: Optimized for picking up sound directly from the front of the microphone. Ideal for single-person voiceovers or podcasts.

  Diagram Description: A microphone icon with sound waves originating from its front, illustrating the Cardioid pickup pattern.

• Omni: Captures sound equally from all directions around the microphone. Suitable for conference calls or group discussions where multiple sound sources are present.

  Diagram Description: A microphone icon with sound waves originating from all directions around it, illustrating the Omni pickup pattern.

• Mute: Activates the mute function, indicated by a red light or symbol.

  Diagram Description: A microphone icon with a red circle and slash symbol over it, indicating the Mute function is active.

Microphone Positioning

For optimal audio quality, position the microphone correctly. Speak directly into the front of the microphone for the Cardioid pattern.

Diagram Description: Two figures are shown relative to a microphone. One shows an 'incorrect position' where the person is speaking from the side or too far away. The other shows a 'correct position' where the person is speaking directly into the front of the microphone.

Important Notes:

• The Talk GO is compatible with most recording software on macOS, Windows, and Linux. Adjust settings within your software as needed.
• No additional drivers or software are required for the JLab Talk GO. It is a plug-and-play device.
• The JLab Talk GO requires a direct USB-A connection to a computer's operating system for power and functionality. It will not operate when connected to a power bank or battery pack.

Shop JLab Products

Explore more JLab audio gear and accessories:

• Shop Products
• Product Alerts
• Burn-in your headphones

Available on the App Store and Google Play.