Trust GXT 115 Macci Wireless Gaming Mouse
User Guide and Setup Instructions
Introduction
This document provides instructions for setting up and using the Trust GXT 115 Macci Wireless Gaming Mouse.
For more information and support, visit: www.trust.com/22417/faq
Package Contents & Setup
The package typically includes the Trust GXT 115 Macci Wireless Gaming Mouse and a USB receiver.
Connecting the USB Receiver
Step 1: Locate the USB receiver (Diagram 1, Label A). This small device connects your mouse to your computer wirelessly.
Step 2: Plug the USB receiver into an available USB port on your computer (Diagram 2). The computer should automatically detect the receiver and install necessary drivers.
Diagram Description: A USB receiver (labeled A) is shown being plugged into a computer's USB port.
Powering On and Operation
Power Switch
Step 3: Locate the power switch on the underside of the mouse (Diagram 1, Label C). Slide the switch to the 'ON' position to activate the mouse (Diagram 3). Slide it to 'OFF' when not in use to conserve battery life.
Diagram Description: The mouse is shown with its power switch being moved to the 'ON' position.
Scroll Wheel
The scroll wheel (Diagram 1, Label B) allows for vertical scrolling through documents and web pages. It may also function as a middle-click button when pressed down.
DPI Settings
The Trust GXT 115 Macci mouse allows you to adjust the sensitivity (Dots Per Inch - DPI) on the fly. This is useful for switching between tasks requiring different cursor speeds, such as precise aiming in games or faster navigation.
DPI Levels:
- 800 DPI
- 1200 DPI
- 1600 DPI
- 2000 DPI
- 2400 DPI
Diagram Description: Diagram 4 illustrates the available DPI settings (800, 1200, 1600, 2000, 2400) and shows a software interface where DPI can be configured.
You can cycle through these DPI settings using a dedicated button, usually located near the scroll wheel (though not explicitly labeled in the provided diagrams, this is common for gaming mice).
