ASSEMBLY INSTRUCTION
Parts Included
| Part Code | Description | Quantity |
|---|---|---|
| Ax1 | Back Cushion | 1 |
| Bx1 | Seat Frame | 1 |
| Cx1 | Seat Cushion | 1 |
| Dx1 | Left Armrest | 1 |
| Ex1 | Right Armrest | 1 |
| Fx1 | Back Side (L) | 1 |
| Gx1 | Back Side (R) | 1 |
| Hx4 | Legs | 4 |
| Washer (1x4) ⚪ | 1 | |
| Screws (2x4, 8x60) ? | 2 | |
| Screws (3x8, 6x20) ? | 3 | |
| Wrench (4x1) ? | 1 |
DIAGRAM 1 (Assemble the Armrest)
Assemble the Left Armrest (Part D) and Right Armrest (Part E) to the Seat Frame (Part B). Use Washers (1) and Screws (2) for attachment.
Visual Description: The diagram shows the Seat Frame (Part B) with attachment points. Parts D and E are positioned to be joined to the frame. Callouts indicate the use of Washers (⚪) and Screws (?) at specific points, labeled 1 and 2 respectively. An inset shows a single Washer and a single Screw.
DIAGRAM 2 (Assemble the Legs)
Attach the Legs (Part H) to the chair frame using Screws (3).
Visual Description: The diagram shows the underside of the chair frame. Four Legs (Part H) are shown being attached to the corners. Screws (3) are used for this attachment, and an Allen Wrench (indicated by the number 4) is depicted for tightening the screws.
DIAGRAM 3 (Assemble the Back Cushion)
Insert the Back Cushion (Part A) into the installed frame as shown in the picture.
Visual Description: The diagram displays the partially assembled chair. An arrow points downwards, indicating the insertion point for the Back Cushion (Part A) into the rear of the chair frame. A magnified detail shows the slots on the cushion designed for attachment.
DIAGRAM 4 (Assemble the Back Side and Seat Cushion)
Open the compressed packages.
Visual Description: A small, compressed cushion is shown with scissors (✂️), indicating it needs to be cut open.
Insert the Back Side panels (Part F and Part G) into the Back Cushion. Then, place the Seat Cushion (Part C) onto the chair.
Visual Description: The diagram illustrates the Back Cushion with Parts F and G being inserted into it. Subsequently, the Seat Cushion (Part C) is shown being placed onto the chair. The final image depicts the fully assembled armchair.
