RT5066R1 User Manual

Technology Specification

General Specifications

Mode:	RT5066R1
Transmission frequency:	2.4G private protocol
DSP:	24bit/198Khz
Main frequency:	160MHz
Flash:	8Mb

Power Management

Enter specifications:	5V 1A adapter
Over voltage protection:	When the input voltage exceeds 15V, protection will automatically start.

Antenna Configuration

Antenna configuration:

Antenna configuration

Button

Power button:

Long press to turn on/off

Input/Output Interface

DC 2.0:	Power input interface
RCA:	3.5 stereo input/output interface

Key Indicators

Working Distance:

Accessible up to 100 meters, equivalent to 320 feet (NO obstacle)
Accessible up to 30-50 meters, equivalent to 98-164 feet (Have obstacle)

Technical Details

Delay:	less than 20 ms (NO obstacle) 200ms (Have obstacle)
Sampling Rate:	24bit/192kHz
Working current voltage:	20mA/5V
Frequency range:	20~20KHZ
Distortion:	<0.1%
Signal-to-noise ratio:	85DB

In the Box

Adapter*2: IN:AC100~240V 50/60Hz OUT:DC 5V 1A
Power cable*2: Comply with UL certification
Audio cable*2: RCA male to 3.5mm male
Antenna*2: 2DB gain
Manual*1: 1pcs
RT5066R1: Transmitter 1pcs, Receiver 1pcs

Working Environment

Operating temperature:	-20℃—60℃
Storage temperature:	-30℃—75℃

Product Connection

Transmitter:	TV/PC/Smartphone/Projector/Tablet/MP3 player
Receiver:	Active Speaker/Active Subwoofer

Working Instructions

Step for Transmitter:

Power on RT5066 transmitter by charging cable.
Plug the RCA to 3.5mm jack cable. RCA to RT5066 Bluetooth transmitter and 3.5mm jack to TV/PC/Smartphone/Projector/Tablet/MP3 player.
LED will be flashing.

Step for Receiver:

Power on RT5066 receiver by charging cable.
Plug the RCA to 3.5mm jack cable RCA to RT5066 receiver and 3.5mm jack to Active Speaker/Active Subwoofer
LED will be flashing. When you complete both receiver and transmitter, the LED will stay on without flash. That means they have paired successfully. You can enjoy now.

Note on Usage:

Normally, when both transmitter and receivers are charged, they will pair automatically. LED of them will stay on blue.
If transmitter LED flashes, please press the button of the transmitter until LED off, and then press until on, they will pair automatically.
If receiver LED flashes, please press the button of both transmitter and the receiver until LED off, and then press until on, they will pair automatically.
If the button does not work, you can use a toothpick or needles to insert the hole to reset (There is a small hole on the side of the power button). If the receiver is off, you need to reset both transmitter and receiver.

	YMOO RT5066 2.4GHz Wireless Audio Transmitter Receiver User Manual Comprehensive user guide for the YMOO RT5066 2.4GHz wireless audio transmitter and receiver set. Learn about setup, operation, troubleshooting, and specifications for HiFi audio transmission with ultra-low latency.
	YMOO B06T1Q1 Bluetooth 5.3 Transmitter Receiver User Manual Comprehensive user manual for the YMOO B06T1Q1 Bluetooth 5.3 audio transmitter and receiver. Details technical specifications, packing contents, battery information, and operating instructions for both transmitting (TX) and receiving (RX) modes, including compatibility and audio latency.
	YMOO RT5014B1 Bluetooth 5.3 Receiver User Guide - HiFi Audio Adapter Comprehensive user guide for the YMOO RT5014B1 Bluetooth 5.3 receiver. Learn how to connect your home stereo system for high-fidelity wireless audio with extended range and dual device support.
	Manuale Utente Ricevitore Audio Bluetooth B06T3 Manuale utente completo per il ricevitore audio Bluetooth 5.3 YMOO B06T3, include specifiche tecniche, istruzioni di configurazione e risoluzione dei problemi per la connessione a altoparlanti, soundbar e altri dispositivi.
	YMOO B06T3 Bluetooth 5.3 Audio Receiver User Manual Comprehensive user manual for the YMOO B06T3 Bluetooth 5.3 Audio Receiver, including specifications, setup instructions, pairing guides for single and multiple devices, and troubleshooting.
	B06T3 Manuel d'utilisation du récepteur Bluetooth YMOO Ce manuel d'utilisation fournit des spécifications détaillées, des instructions d'utilisation et des guides de couplage pour le récepteur Bluetooth YMOO B06T3. Apprenez à connecter et à utiliser votre appareil pour la diffusion audio.
	Y7 Bluetooth Headphone User Manual and Specifications User manual and technical specifications for the Y7 Bluetooth headphones, detailing features like noise canceling, battery life, connectivity, and operation.
	YMOO E500 Headphones User Manual and Setup Guide This document provides instructions for setting up and using the YMOO E500 Bluetooth headphones, including pairing, active noise cancellation, and wired mode operation. It also includes warranty information and disposal guidelines.