Y7 Bluetooth Headphone User Manual
Technology Specification
General Specifications
| Mode | Y7 |
|---|---|
| Bluetooth Version | 5.2 |
| Noise Canceling Solution | 5 mic ANC + ENC noise canceling |
| Noise Canceling Performance | 25-35DB |
| Bluetooth Profiles | SBC, AAC |
| Main Frequency | 20-20KHZ |
| Play Time | 80H (BT ON /ANC OFF) 80H (BT OFF/ANC ON) 57H (BT ON/ ANC ON) |
| Bluetooth Range | >15m |
| Pairing Name | Y7 |
| Operation Temperature | -10 to +55℃ |
| Storage Temperature | -20 to 60℃ |
| Product Weight | 268g |
Wireless, Battery, and Audio Specifications
Wireless Connection
| Wireless Connection TYPE | Bluetooth, NFC |
|---|---|
| Noise Canceling Mode | ANC ON/ANC OFF/Transparent Mode |
| Audio Port | TYPE C (ONLY Support 3.5mm to TYPE C cable) |
| Charge Port | TYPE C |
| Product Size | 156*75*208mm (foldable) |
Battery Specifications
| Battery type | Polymer lithium battery |
|---|---|
| Battery Output Voltage | 3.7V |
| Battery Capacity | 850mAh |
| Full Charging Time | ≤2H |
| Charging Plug/Socket Type | Type-C |
| Charging Voltage | 5V |
| Charging Current | 300mA |
Audio Specifications
| Speaker Size | Φ40 mm |
|---|---|
| NFC Quick Connection | YES |
| Microphone Type (Voice) | 1 * Electric microphone |
| Microphone Type (ANC) | 4 * ANC noise reduction microphone |
In The Box
- User Manual: 1pcs
- Type-C charge cable: 1pcs
- Y7 Bluetooth headphone: 1pcs
- 3.5 to Type-C audio cable: 1pcs
- Portable leather bag: 1pcs
- Aircraft Adapter: 1pcs
Working Instructions
How to connect headphones
- Press and hold the power button for more than 3s (until the red and blue flash alternately) to enter the pairing mode;
- Turn on the Bluetooth of your mobile phone, retrieve the headset named Y7, and pair it. If you can't retrieve it all the time, you can restart the phone's Bluetooth to try.
- The pairing connection is successful, and the blue indicator light flashes slowly.
Note
When you need to use the Bluetooth mode, do not plug in the wired accessories (power cord and audio cable), once the wired accessories are plugged in, it will enter the wired mode.
How to reset Y7 Wireless Headphones
Please press and hold both volume "+" and "-" at the same time for about 7 seconds until the LED flashes purple three times, then the LED flashes red and blue alternately to enter the pairing mode.
Controls
| Control | Action |
|---|---|
| Volume+ | Quick Click 1 time for volume+ Long press 3s for next music |
| Volume- | Quick Click 1 time for volume+ Long press 3s for previous music |
| Power Button/Bluetooth | Long press until LED flash in Red and blue to enter into pairing status Long press until LED off, to headphone off Long press |
| ANC Button | ANC on / ANC off / Transparent Mode |
