YMOO E500 Headphones - Quick Start Guide

Step 1: Charging

Connect the headphones to a power source using the provided cable. The charging indicator will show the charging status.

Diagram Description: An illustration showing the headphones being connected to a charging cable and a power source.

Step 2: Pairing with Bluetooth Devices

Turn on the headphones. The indicator light will flash, indicating it's in pairing mode. On your device (Android™ or iPhone), go to Bluetooth settings and select "YMOO E500" to connect.

Diagram Description: Illustrations showing the power button being pressed, the indicator light flashing, and a smartphone screen displaying Bluetooth pairing options.

Step 3: Using Active Noise Cancelling (ANC)

Press the ANC button to turn Active Noise Cancelling on or off. The indicator will show the ANC status.

Diagram Description: Illustrations showing the ANC button being pressed, with indicators for ANC ON and ANC OFF.

Step 4: Wired Mode

Connect the headphones to your device using the AUX cable for wired listening.

Diagram Description: An illustration showing the AUX cable being plugged into the headphones and a device.

Step 5: Voice Assistant

Activate your device's voice assistant by pressing the designated button.

Diagram Description: An illustration showing the voice assistant button being pressed.

Step 6: Mute Function

Use the microphone mute button to control your microphone during calls.

Diagram Description: An illustration showing the microphone mute button.

Step 7: Resetting the Headphones

To reset the headphones, press and hold the reset button for 5 seconds.

Diagram Description: An illustration showing the reset button being pressed and held.

Compliance Information

ANCBIT International declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states.

FCC ID: 2AUFR-RT952

ISED: 29252-AKB35188500

HVIN: AKB35188500

CE ROHS

Diagram Description: Icons indicating CE and RoHS compliance.

Manufacturer and Operator Information

Manufacturer: Shenzhen Ankbit Electronics Limited

Address: Runfeng Industrial Park 4197 Baoan Blvd., Xixiang St., Baoan Dist, Shenzhen, China

Operator: Ankbit International Limited

Address: 45-51 Chatham Road South, Tsim Sha Tsui, Kowloon, Hong Kong

EC REP: Vitmaster Consulting GmbH, 80025 Munich, Germany

Warranty Information

Improper installation, misuse, inattention, or using an unsuitable power source or device may render the warranty ineffective. The warranty does not cover damages that did not occur during shipping, or repairs and adjustments not approved by the manufacturer. Shipping fees for warranty service are the responsibility of the user.

Disposal Information

Always dispose of used electronic appliances at a recycling center. Do not dispose of used appliances with household waste.

Manufacturing Details

Material Name: RT952R2Y Instruction Manual

Material Number: 07.69R952025

Material Size: 150*75mm

Version No.: 1.0

Date: 2023/05/18