Lithonia Lighting WL2 LED Wall Bracket & Surface Mount Luminaire
Features & Specifications
Intended Use: Designed for wall or ceiling mounting, vertically or horizontally. The WL series combines digital LED lighting and controls technologies with high-performance optical design for advanced wall-mount ambient lighting. It features a high-efficacy light engine for long life and excellent color quality, ensuring an efficient and sustainable lighting installation.
Construction: Housing is roll-formed from code-gauge steel. The refractor is retained in die-cast ends for secure installation and easy maintenance. Decorative die-cast end caps add durability. End caps are post-painted in white polyester powder coat for a smooth finish. Post-painted channel is available via the PAF option.
Optics: Features an impact-modified linear faceted refractor, optically engineered for superior light distribution and maximum efficacy. A crescent-shape linear faceted refractor system obscures and integrates individual LED images, uniformly washing the fixture surface with light.
Electrical: Utilizes long-life LEDs coupled with high-efficiency drivers for superior illumination quality and extended service life. It offers 90% LED lumen maintenance at 60,000 hours (L90/60,000) and an LED CRI of 82. eldoLED driver options provide choices for dimming range and control, ensuring flicker-free operation, low-current inrush, 89% efficiency, and low EMI. A driver disconnect is provided where required by US and Canadian codes. Optional nLight® embedded controls continuously monitor system performance and allow for constant lumen management. The Lumen Management system (option N80) actively manages the LED light source to maintain constant lumen output over the system's life, preventing energy waste from over-lighting.
Sensors:
- Integrated Sensor (Individual Control): Sensor Switch MSD7 (Passive Infrared (PIR)) integrated occupancy sensor with photocell allows the luminaire to power off when the space is unoccupied.
- Integrated Sensor (nLight Wired Networking): nLight-enabled sensor communicates over an nLight network. When wired with CAT-5 cabling to other nLight-enabled devices (sensors, power packs, WallPods), an nLight control zone is created. Remote status monitoring and control are possible via SensorView software when linked to a Gateway.
- Integrated Smart Sensor (nLight AIR Wireless Platform): RES7 sensor is nLight AIR enabled, communicating over the wireless nLight control platform. Available with an automatic dimming photocell and either a digital PIR or microphonics dual technology occupancy sensor. Pairs with other luminaires and wall switches via the CLAIRITY mobile app for simple sensor adjustment.
Listings: CSA certified to meet U.S. and Canadian standards. Suitable for damp locations. Patents pending. DesignLights Consortium® (DLC) qualified product (check DLC QPL for specific versions).
Government Procurement:
- BAA: Product with BAA option qualifies as a domestic end product under the Buy American Act (FAR and DFARS). Also qualifies as manufactured in the United States under DOT Buy America regulations.
- BABA: Product with BAA option qualifies as produced in the United States under the Build America, Buy America Act. Refer to www.acuitybrands.com/buy-american for details.
Warranty: 5-year limited warranty. This is the sole warranty provided; all other express and implied warranties are disclaimed.
Note: Actual performance may vary based on end-user environment and application. Values are design or typical, measured under laboratory conditions at 25 °C. Specifications are subject to change without notice.
A+ Capable Luminaire
This luminaire is A+ capable, designed and tested for consistent color appearance and out-of-the-box control compatibility with simple commissioning. All configurations meet Acuity Brands' specification for chromatic consistency. It is part of an A+ Certified solution for nLight® or XPoint™ Wireless control networks when ordered with specific drivers (marked by a shaded background). Learn more at www.acuitybrands.com/aplus.
Ordering Information
Lead times vary based on selected options. Consult your sales representative.
Example: WL2 18L EZ1 LP840
Base Configuration
| Series | Lumens ¹ | Voltage | Driver | Color Temperature | nLight Interface |
|---|---|---|---|---|---|
| WL2 2' wall-mount LED | 08L 800 lumens 12L 1200 lumens 18L 1800 lumens 22L 2200 lumens | (blank) MVOLT | EZ1 eldoLED dims to 1%, 0-10V EZB eldoLED dims to dark, 0-10V GZ1 Dims to 1% (0-10V dimming)² GZ10 Dims to 10% (0-10V dimming)² SLD Step-level dimming³ | LP830 3000 K LP835 3500 K LP840 4000 K LP850 5000 K | nLight Wired (blank) No nLight® interface N80 nLight® with 80% lumen management N80EMG nLight® with 80% lumen management (for generator supply EM power)⁴ N100 nLight® without lumen management N100EMG nLight® without lumen management (for generator supply EM power)⁴ nLight Wireless (blank) No nLight® interface NLTAIR2 nLight® Air Generation 2 enabled⁵ |
Control Options
| Control | Standby Mode⁹ | Options | Finish¹¹ |
|---|---|---|---|
| nLight Wired (blank) No nLight control NES7 nLight® nES 7 PIR integral occupancy sensor⁷ NESPDT7 nLight® nES PDT 7 dual technology integral occupancy control⁷ NES7ADCX nLight® nES 7 ADCX PIR integral occupancy sensor with automatic dimming photocell⁷ | (blank) Fixture turns off when unoccupied DIM10 Fixture dims to approx. 10% light output when unoccupied DIM50 Fixture dims to approx. 50% light output when unoccupied NOC Occupancy sensor disabled¹⁰ | SC Surface conduit end cap provisions BAA Buy America(n) Act and/or Build America Buy America Qualified BDP Factory Installed Ballast Disconnect Plug | (blank) White PAF Paint After Fabrication White |
| nLight Wireless RES7 nLight AIR control with PIR integral occupancy sensor and automatic dimming photocell RES7PDT nLight AIR control with PDT dual technology integral occupancy sensor and automatic dimming photocell | |||
| Individual Control MSD7 Sensor Switch® MSD 7 PIR Integral Occupancy Control⁸ |
Notes:
1. Approximate lumen output.
2. Not available with any Controls or sensor options.
3. Not available with nLight Interface or Controls.
4. nLight EMG option requires connection to existing nLight network; power is provided from a separate N80 or N100 enabled fixture.
5. Must order with RES7, RES7PDT. Only available with EZ1 driver.
6. See sensor options on page 4.
7. Requires N80, N100, N80EMG, or N100EMG.
8. Not available with nLight options or EZB.
9. Not available with nLight Wireless sensor options.
10. Can only be ordered in conjunction with EZ1, NLTAIR2, RES7/RES7PDT. Occupancy sensor disabled at factory but can be re-enabled upon commissioning.
11. For additional paint finishes, see Architectural Colors.
nLight® Wired Control Accessories
Order as separate catalog numbers. Visit www.acuitybrands.com/products/controls/nlight.
| Category | Model Number / Description |
|---|---|
| WallPod Stations | nPODM [color] (On/Off) nPODM DX [color] (On/Off & raise/lower) nPOD GFX [color] (Graphic touchscreen) |
| Occupancy Sensors | nCM 9 RJB / nCM PDT 9 RJB (Small motion 360°, ceiling (PIR / dual tech)) nCM10 RJB / nCM PDT 10 RJB (Large motion 360°, ceiling (PIR / dual tech)) |
| Photocell Controls | nCM ADCX RJB |
| Wall Switch | nWSX PDT LV DX [color] (with raise/lower) |
| Cabling | CAT5 10FT J1 (Cat-5 cable, plenum rated, 10' cable) CAT5 30FT J1 (Cat-5 cable, plenum rated, 30' cable) |
nLight® AIR Control Accessories
Order as separate catalog numbers. Visit www.acuitybrands.com/products/controls/nlightair.
| Category | Model Number |
|---|---|
| Wall Switches | rPODB [color] G2 (On/Off single pole) rPODB 2P [color] G2 (On/Off two pole) rPODB DX [color] G2 (On/Off & raise/lower single pole) rPODB 2P DX [color] G2 (On/Off & raise/lower two pole) rPODBZ DX WH G2 (On/Off & raise/lower single pole) |
RCMS Ordering Information
Example: RCMS PDT 10 AR G2
| Series/Detection | Occupancy Detection | Lens (Required) | Operating Mode | Generation |
|---|---|---|---|---|
| RCMS¹ nLight AIR occupancy and daylight sensor | (blank) PIR Detection PDT¹ Dual Tech PIR/Microphonics | 10 Large Motion/Extended Range 360° 9 Small Motion/Extended Range 360° 6 High Bay 360° Lens | (blank) None AIR Auxiliary Relay | G2 Generation 2 compatibility |
¹ RCMS requires low voltage power from either RPP20 DS 24V G2 or PS 150.
nLight Platform Overview
nLight Embedded Fixtures Offerings
| nLight Embedded Fixtures Offer: | Customers Get: |
|---|---|
| Manual Dimming | Convenience and visual comfort for occupants |
| Motion Sensing and/or Daylight Harvesting | Energy savings and code compliance |
| Fixture or Group Level Control | Ability to configure lighting to space requirements |
| Flexibility | Ease of fixture moves, adds, and changes |
| Wireless Wall Switch (nLight AIR Only) | Ease and flexibility of placement |
| Astronomical and Time of Day Scheduling | Energy savings and building security |
| Scalable Solution | nLight controls to grow with your business |
| Future-Ready | nLight platform to set foundation for future upgrades and capabilities |
nLight Air Wireless
Simple as 1, 2, 3:
- Install the nLight® AIR fixtures with embedded smart sensor.
- Install the wireless battery-powered wall switch.
- With the CLAIRITY app, pair fixtures with the wall switch and customize sensor settings as desired.
Diagram Description: Visuals show nLight AIR fixtures, a wireless wall switch (rPODB 2P DX), and a mobile device, illustrating the wireless setup.
nLight Wired Networking
Simple as 1, 2, 3:
- Install the nLight® Wired fixtures with embedded control.
- Install the nLight Wired wall switch.
- Connect fixtures using standard CAT5e cables; devices automatically discover and operate (plug and play).
Diagram Description: Visuals show nLight Wired fixtures connected via CAT5e cables to a nLight Switch (nPODM DX) and a nLight enabled Relight Kit, demonstrating wired network setup.
Diagram Description: A basic nLight Zone is shown with a fixture connected via CAT5e to a nLight Switch (nPODM DX).
Sensor Options & Coverage
Sensor Options Summary
| Option | Automatic Dimming Photocell | Occupancy Sensing PIR | Occupancy Sensing PDT | nLight Wired Networking | nLight AIR Networking |
|---|---|---|---|---|---|
| MSD7 | X | ||||
| NES7 | X | X | |||
| NES7ADCX | X | X | X | ||
| NESPDT7 | X | X | |||
| RES7 | X | X | |||
| RES7PDT | X | X |
Sensor Coverage Pattern: Mini 360° Lens
Recommended for walking motion detection from mounting heights between 8 ft (2.44 m) and 20 ft (6.10 m).
- Initial detection of walking motion along sensor axes at distances of 2x the mounting height up to 15 ft (4.57 m) and 1.75x up to 20 ft (6.10 m).
- Provides 12 ft (3.66 m) radial detection of small motion when mounted at 9 ft (2.74 m).
- Initial detection occurs earlier when walking across the sensor's field of view than when walking directly at the sensor.
Diagram Description: A radial chart illustrates the 9 FT Mounting coverage pattern, showing detection distances (in feet) from the center at various angles. For example, at 9 ft mounting height, detection extends up to 12 ft radially for small motion.
Integrated Sensor Descriptions
Individual Control (MSD7): The MSD7 PIR occupancy sensor is ideal for areas without obstructions and where daylight harvesting may be desired. Suggested applications include hallways, corridors, storage rooms, and breakrooms or other areas where people are typically moving.
nLight Wired Networking (nES7, nES7ADCX, nESPDT7): The nES 7 is ideal for small rooms without obstructions or areas with primarily walking motion (hallways, corridors, storage rooms, breakrooms). The NES7ADCX includes an integrated photocell for daylight harvesting. For areas with obstructions like restrooms, private offices, open offices, or conference rooms, the nES PDT 7 dual technology sensor (PIR and Microphonics) is recommended.
nLight AIR Wireless (RES7, RES7PDT): nLight AIR is ideal for retrofit or new construction where additional wiring is difficult. The integrated RES7 or RES7PDT smart sensors are part of each luminaire in the nLight AIR network, allowing grouping for control of multiple luminaires. Digital PIR occupancy detection and daylight sensing offer granular control.
Sequence of Operation
Diagram Description: Two charts illustrate the sequence of operation based on motion and light levels. The first shows motion detection leading to lights ON, and no motion leading to lights OFF after a time delay. The second chart details transitions, showing lights ON when motion is detected, and transitioning to OFF after a time delay when no motion is detected. The automatic dimming photocell has a preset of 5fc.
Performance Data
| Lumen package | Input watts¹ | Lumens | LPW |
|---|---|---|---|
| 08L LP830 | 7.5 | 771 | 102.80 |
| 08L LP835 | 7.5 | 809 | 107.87 |
| 08L LP840 | 7.5 | 848 | 113.07 |
| 08L LP850 | 7.5 | 877 | 116.93 |
| 12L LP830 | 12.2 | 1190 | 97.54 |
| 12L LP835 | 12.2 | 1249 | 102.38 |
| 12L LP840 | 12.2 | 1311 | 107.46 |
| 12L LP850 | 12.2 | 1364 | 111.80 |
| 18L LP830 | 17.5 | 1711 | 97.77 |
| 18L LP835 | 17.5 | 1796 | 102.63 |
| 18L LP840 | 17.5 | 1889 | 107.94 |
| 18L LP850 | 17.5 | 1966 | 112.34 |
| 22L LP830 | 21.0 | 2086 | 99.33 |
| 22L LP835 | 21.0 | 2120.5 | 100.98 |
| 22L LP840 | 21.0 | 2189.4 | 104.26 |
| 22L LP850 | 21.0 | 2258.4 | 107.54 |
¹ Actual wattage may differ by +/- 5% when operating between 120-277V +/- 10%.
Dimensions
All dimensions are in inches (centimeters) unless otherwise noted.
- Length: 25-7/8" (65.7 cm) with sensor; 23-3/8" (59.4 cm) without sensor.
- Height: 3-11/16" (9.3 cm) with sensor; 3-7/8" (9.7 cm) without sensor.
- Width: 4-3/4" (12.1 cm).
Diagram Description: Visuals show the luminaire's dimensions, indicating length, height (with and without sensor), and width. The height measurement for the sensor is 3-11/16" (9.3 cm), and without the sensor is 3-7/8" (9.7 cm). The width is 4-3/4" (12.0 cm).
Mounting Data
Suitable for unit installation, surface ceiling or wall mounting.
Diagram Description: The mounting data diagram illustrates hole patterns and spacing for surface ceiling or wall mounting. It shows a primary mounting span of 22-3/8" (59.4 cm) and additional bracket mounting points with dimensions like 1-5/8" (4.1 cm), 1-3/8" (3.5 cm), and 2-1/4" (5.7 cm).
