LevelPro® — ProScan®3 Series
Continuous Radar Level Sensor (80GHz)
Quick Start Manual
Programming
STEPS
Home Screen
⏎ OK
DISPLAY
192.5 IN
OPERATION
Home Screen
⌚ Approx. 30 secs for the level reading to display
Level Searching...
1
Main Menu
⏎ OK
DISPLAY
Main Menu
⏎ OK
→ User Para.
→ Factory Para.
OPERATION
STEP 1
Select User Parameter Press OK
2
User Parameters
⏎ OK
DISPLAY
User Para.
→ Basic Setup
Measure Setup
Backup Para.
OPERATION
STEP 2
Select Basic Setup Press OK
3
Range Settings
⏎ OK
DISPLAY
Basic Setup
Range: 5000 mm
Offset: 10 mm
Pos 4ma: 0 mm
OPERATION
STEP 3
Set Range Press OK
• Range: Distance from Sensor Tip to Bottom of Tank.
Note:
↗ Use ◀ to move cursor. 5000
↗ Use ▶ to change digits.
Cursor
Range
4
4-20mA Settings
ESC x 3 to go back to Home Screen
DISPLAY
Basic Setup
Pos 4ma: 0 mm
OPERATION
STEP 4
Set 4mA Press OK
• 4mA: Low Level | Default = 0
20mA (High)
Set 20mA Press OK
• Pos 20ma: 3000 mm • 20mA: High Level | Should be lower than Range
Blind: 100 mm
Note:
↗ Use ◀ to move cursor. 3000
↗ Use ▶ to change digits.
Cursor
4mA (Low)
Bluetooth Application Settings
Install RadarMe App in your Device
App Store
Google Play
Operation
Make sure your Device Bluetooth is ON
Open RadarMe App in the Device
Click Device List Menu
Select ICON12XXX from the List
ProScan3 Connected
Setting Display Unit
Home Screen
Level(m) 35.7873
Distance(m) 84.2124
Current(mA) 8.771
Percentage(%) 29.82
Running State 0
Update Time 2023/11/21 16:29:36
SET Menu
⏎ Click Set Button
System Settings Menu
⏎ Select System Settings
System Settings Menu
⏎ Click Unit Drop Down Arrow
Home Screen
Level(inch) 35.7873
Distance(inch) 84.2124
Current(mA) 8.771
Percentage(%) 29.82
Running State 0
Update Time 2023/11/21 16:29:36
⏎ Select Unit (m | inch)
Unit Changed Successfully!
Setting Range
Home Screen
Level(inch) 35.7873
Distance(inch) 84.2124
Current(mA) 8.771
Percentage(%) 29.82
Running State 0
Update Time 2023/11/21 16:29:36
Set
⏎ Click Set Button
Basic Parameters
⏎ Select Basic Parameters
Set Range Value
E.g. Range Value = 120 (inch)
Range 120 (inch)
Diagram: Tank with level indicated.
Range 120 (inch)
Setting Level
Basic Parameters
Range(inch) 120.00
Migration Amount(inch) 0.0
4mA Location(inch) 0.0
20mA Location(inch) 119.9998
Blind Area(inch) 4.0157
Damping Time 50
Device Address 1
Baud Rate 9600
⏎ READ ⏎ SET ⏎ BACKUP ⏎ RESTORE
Set 4mA Location
4mA (Low Level) = 0
4 mA
Basic Parameters
Range(inch) 120.00
Migration Amount(inch) 0.0
4mA Location(inch) 0.0
20mA Location(inch) 110.00
Blind Area(inch) 4.00
Damping Time 50
Device Address 1
Baud Rate 9600
⏎ READ ⏎ SET ⏎ BACKUP ⏎ RESTORE
Set 20mA Location
20mA (High Level) = 110(inch)
20 mA
Diagram: Tank showing 4mA and 20mA levels.
4 mA (Low Level)
20 mA (High Level)
Setting Parameters
Basic Parameters
Range(inch) 120.00
Migration Amount(inch) 0.0
4mA Location(inch) 0.0
20mA Location(inch) 110.00
Blind Area(inch) 4.00
Damping Time 50
Device Address 1
Baud Rate 9600
⏎ READ ⏎ SET ⏎ BACKUP ⏎ RESTORE
Set Blind Area
E.g. Blind Area = 4.00(Inch)
Basic Parameters
Range(inch) 120.00
Migration Amount(inch) 0.0
4mA Location(inch) 0.0
20mA Location(inch) 110.00
Blind Area(inch) 4.00
Damping Time 10
Device Address 1
Baud Rate 9600
⏎ READ ⏎ SET ⏎ BACKUP ⏎ RESTORE
Set Damping Time
E.g. Damping Time = 10(sec)
Basic Parameters
Range(inch) 120.00
Migration Amount(inch) 0.0
4mA Location(inch) 0.0
20mA Location(inch) 110.00
Blind Area(inch) 4.00
Damping Time 10
Device Address 1
Baud Rate 9600
⏎ READ ⏎ SET ⏎ BACKUP ⏎ RESTORE
Click Set Button to Save the Parameters
Diagram: Tank showing measurement location and range.
Measurement Location 100%
Range 0%
Wiring
Remove cover and display to access wiring terminals.
Diagram: Sensor unit with cover removed, showing wiring terminals.
LevelPro
192.5 IN
⏎ OPEN ⏎ LOCK ⏎ ESC ⏎ OK
Diagram: Close-up of wiring terminals.
Loop Powered Terminals
Built-in Level
RS485 Terminals
24VDC
RS485
Warranty, Returns and Limitations
Warranty
Icon Process Controls Ltd warrants to the original purchaser of its products that such products will be free from defects in material and workmanship under normal use and service in accordance with instructions furnished by Icon Process Controls Ltd for a period of one year from the date of sale of such products. Icon Process Controls Ltd obligation under this warranty is solely and exclusively limited to the repair or replacement, at Icon Process Controls Ltd option, of the products or components, which Icon Process Controls Ltd examination determines to its satisfaction to be defective in material or workmanship within the warranty period. Icon Process Controls Ltd must be notified pursuant to the instructions below of any claim under this warranty within thirty (30) days of any claimed lack of conformity of the product. Any product repaired under this warranty will be warranted only for the remainder of the original warranty period. Any product provided as a replacement under this warranty will be warranted for the one year from the date of replacement.
Returns
Products cannot be returned to Icon Process Controls Ltd without prior authorization. To return a product that is thought to be defective, go to www.iconprocon.com, and submit a customer return (MRA) request form and follow the instructions therein. All warranty and non-warranty product returns to Icon Process Controls Ltd must be shipped prepaid and insured. Icon Process Controls Ltd will not be responsible for any products lost or damaged in shipment.
Limitations
This warranty does not apply to products which: 1) are beyond the warranty period or are products for which the original purchaser does not follow the warranty procedures outlined above; 2) have been subjected to electrical, mechanical or chemical damage due to improper, accidental or negligent use; 3) have been modified or altered; 4) anyone other than service personnel authorized by Icon Process Controls Ltd have attempted to repair; 5) have been involved in accidents or natural disasters; or 6) are damaged during return shipment to Icon Process Controls Ltd reserves the right to unilaterally waive this warranty and dispose of any product returned to Icon Process Controls Ltd where: 1) there is evidence of a potentially hazardous material present with the product; or 2) the product has remained unclaimed at Icon Process Controls Ltd for more than 30 days after Icon Process Controls Ltd has dutifully requested disposition. This warranty contains the sole express warranty made by Icon Process Controls Ltd in connection with its products. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. The remedies of repair or replacement as stated above are the exclusive remedies for the breach of this warranty. IN NO EVENT SHALL Icon Process Controls Ltd BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING PERSONAL OR REAL PROPERTY OR FOR INJURY TO ANY PERSON. THIS WARRANTY CONSTITUTES THE FINAL, COMPLETE AND EXCLUSIVE STATEMENT OF WARRANTY TERMS AND NO PERSON IS AUTHORIZED TO MAKE ANY OTHER WARRANTIES OR REPRESENTATIONS ON BEHALF OF Icon Process Controls Ltd. This warranty will be interpreted pursuant to the laws of the province of Ontario, Canada.
If any portion of this warranty is held to be invalid or unenforceable for any reason, such finding will not invalidate any other provision of this warranty.
For additional product documentation and technical support visit: www.iconprocon.com | e-mail: sales@iconprocon.com or support@iconprocon.com | Ph: 905.469.9283
Home — Corrosion-Resistant Industrial Instrumentation Equipment - ICON Process Controls
Home — Corrosion-Resistant Industrial Instrumentation Equipment - ICON Process Controls
