TheraPure TP250 Air Purifier - User Manual

Thank you for purchasing the TheraPure® TP250 air purifier. With UV light and filtration to clean the air, the TheraPure® TP250 air purifier will greatly improve the quality of the air in your home, office, or other environments. Please read the following instructions carefully to ensure optimal performance and safety.

Technical Data

Introduction

Thank you for purchasing the Therapure® TP250 air purifier. With UV light and filtration to clean the air, the Therapure® TP250 air purifier will greatly improve the quality of the air in your home, office, or other environments. Once you've experienced the purity of Therapure® TP250 air, visit our website to find out more ways to improve the quality of your air and your life with our premium products and upgrades. Please be sure to read the following instructions carefully to ensure optimal performance and safety.

Scope of Delivery

• Therapure TP250
• ATP150 HEPA Filter
• Quick Manual
• Safety Instructions

Overview and Part Names

The TheraPure TP250 consists of the following main components:

• 1. TheraPure TP250 Unit
• 2. Filter & Prefilter
• 3. Bottom Cover

Starting Up

1. Place the device on a flat surface.
2. Plug the power cord into a power outlet.
3. Turn it on.

Symbols and Displays

Cleaning and Maintenance

Care Instructions

Stagnant water can impair cleanliness and lead to unpleasant odors. Regular maintenance and cleaning are necessary to ensure clean and unimpaired operation. Recommended cleaning and maintenance intervals vary depending on air quality, water quality, and operating time.

⚠️ Do not use alcohol or corrosive cleaning agents for cleaning.

Always unplug the appliance from the power outlet before cleaning. [Plug symbol]

The Filter Compartment

• Use a soft, damp cloth to clean the exterior.
• 1. Place your device upside down.
• 2. Turn the bottom cover anti-clockwise until it unlocks.
• 3. Remove the filter.
• 4. Use a dry soft towel to clean the filter compartment.
• 5. Place the filter back in the device and lock the bottom cover.

Replacing the Filter

The filter should be replaced after the filter light turns on. After replacing the filter, press the Reset Filter button for 3 seconds to reset the filter reminder.

After removing the combination filter and pre-filter from the device, they can be cleaned with a vacuum cleaner and/or a dry soft towel.

For more information and to purchase replacement filters, visit envion.com or contact your specialized ENVION dealer.