Secop PL35F Compressor
Model Designation: PL35F
Power Supply: 220-240V / 50Hz 1~
Sales Code: 101G0202
Single Pack Details
Single Pack Order Code: 195B4234
Position | Title | Code | Quantity |
---|---|---|---|
1 | Compressor PL35F | 101G0202 | 1 |
2 | PTC starting device (220V, 25Ohm, 6.3mm) | 103N0011 | 1 |
3 | Protection screen for PTC | 103N0476 | 1 |
4 | Cord relief | 103N1010 | 1 |
5 | Cover | 103N0491 | 1 |
6 | Bolt joint for one compressor | M6 | ø16mm | 118-1917 | 1 |
Technical Data
Compressor Design
Oil type | Polyolester | Refrigerant(s) | R134a |
Oil viscosity | 15cST | Displacement | 2cm³ / 0,12cu.in |
Oil quantity | 153cm³ / 5,2fl.oz | Compressors on pallet | 150 |
Refr. charge - tech. limit | 300g / 10,6oz | ||
Free gas volume comp. | 830cm³ / 28,1fl.oz | ||
Weight | 4,1kg / 9lbs | ||
Motor protection | 1# internal | ||
Winding resistance main | 52,61Ω (at 25°C) | ||
Winding resistance aux | 20,08Ω (at 25°C) | ||
Max. winding temp. | 125°C / 257°F | ||
Max. discharge temp. | 130°C / 266°F |
General - Configurations with PL35F (Conf. 1)
Motorconfiguration | RSIR | Voltage range | 198-254V |
Power supply (nominal) | 220-240V/50Hz | Approvals | VDE, EAC |
Number of phases | 1 | Starting torque | LST |
Note | -/- |
Applications with PL35F (Conf. 1)
Refrigerant | R134a | System cooling | static |
Application | LBP+MBP | Hot gas defrost | -/- |
Long interval pull down | -/- |
Electrical data - Configurations with PL35F (Conf. 1)
Starting device type | PTC | LRA (locked rotor amps / 4s) | 1,78A |
Run capacitor | -/- | RLA (rated load amps / 1s) | 0,42A |
Start capacitor | -/- | Cut in current | 5,92A |
Compressor Dimensions
Housing
A Height | 137mm / 5,39in | X | øi 6,41-6,59 | Z | øi 6,41-6,59 |
B Height | 135mm / 5,31in | Y | øi 5,12-5,26 | ||
C Length shell | 156,3mm / 6,15in | Material | steel/CU | Material | copper |
D Length w. cover | 206mm / 8,11in | ||||
E Width | 130mm / 5,12in |
Connectors
Diameter | Suction | Discharge | Process | |||||
---|---|---|---|---|---|---|---|---|
[mm] | [in] | [mm] | [in] | [mm] | [in] | [mm] | [in] | |
(i:inside, o:outside) | øi 6,41-6,59 | øi 0,25-0,26 | øi 5,12-5,26 | øi 0,2-0,21 | øi 6,41-6,59 | øi 0,25-0,26 | ||
Material | steel/CU | copper | copper | |||||
Horizontal angle | +2° | 45° | 0° | 41,5° | 40° | |||
Vertical angle | +2° | 40° | 21° | 41,5° | 40° | |||
Position I/h/w | [mm] 64/31/47 | [in] 2,5/1,2/1,9 | [mm] 60/68/76 | [in] 2,4/2,7/3 | [mm] 35/64/47 | [in] 1,4/2,5/1,9 | ||
Straight tube I. | [mm] 12 | [in] 0,5 | [mm] 12 | [in] 0,5 | [mm] 12 | [in] 0,5 |
Compressor fixation
Bolt joint | M6 | Ø16mm: 118-1917 (one comp.), 118-1918 (multi pack)
Bolt joint | Ø1/4" | ø16mm: 118-1946
Snap-on | Ø7,3 | Ø16mm: 118-1947 (one comp.), 118-1919 (multi pack)
Ambient Temperatures / System Cooling
Ambient temperature min.: 10°C / 50°F
Ambient temperature max.: 38°C / 101°F
T ambient | System cooling (n/a: outside limits) | LBP | MBP | HBP |
---|---|---|---|---|
32°C / 90°F | static | static | n/a | |
38°C / 100°F | static | static | n/a | |
43°C / 110°F | n/a | n/a | n/a |
Operation Pressure Range
Condensing pressure (sat. temp.):
Evaporation pressure (sat. temp.):
Return gas temp.:
Liquid temp.:
Tliq= 45/113
cond. pressure pc= 45/113
return gas temp. RGT=32/90
liquid temp Tliq= 45/113
cond. pressure pc= 55/131
return gas temp RGT=32/90
liquid temp Tliq= 55/131
Cooling capacity | COP | EER | P1 | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
[°C] | [°F] | [W] | [Btu/h] | [kcal/h] | [W/W] | [Btu/Wh] | [kcal/Wh] | [W] | [A] | [kg/h] | |
-7 | 20 | 103,3 | 353 | 88,9 | 1,34 | 4,59 | 1,16 | 76,8 | 0,57 | 2,25 | |
-10 | 14 | 78,9 | 270 | 67,9 | 1,10 | 3,76 | 0,95 | 71,7 | 0,55 | 1,91 | |
-10 | 14 | 93,6 | 320 | 80,5 | 1,41 | 4,80 | 1,21 | 66,5 | 0,54 | 2,19 | |
-7 | 20 | 100,5 | 343 | 86,5 | 1,37 | 4,67 | 1,18 | 73,5 | 0,56 | 2,48 | |
-10 | 14 | 97,1 | 332 | 83,6 | 1,46 | 4,98 | 1,26 | 66,5 | 0,54 | 2,12 | |
-25 | -13 | 42,1 | 144 | 36,2 | 0,86 | 2,94 | 0,74 | 48,9 | 0,50 | 0,91 | |
-23 | -10 | 46,9 | 160 | 40,4 | 0,93 | 3,17 | 0,80 | 50,6 | 0,50 | 1,02 | |
-20 | -4 | 57,4 | 196 | 49,4 | 1,06 | 3,62 | 0,91 | 54,2 | 0,51 | 1,25 | |
-10 | 14 | 97,1 | 332 | 83,6 | 1,46 | 4,98 | 1,26 | 66,5 | 0,54 | 2,12 | |
-7 | 20 | 112,8 | 385 | 97,1 | 1,59 | 5,43 | 1,37 | 70,9 | 0,56 | 2,48 | |
-5 | 23 | 121,4 | 415 | 104,5 | 1,66 | 5,67 | 1,43 | 73,2 | 0,57 | 2,67 | |
0 | 32 | 148,8 | 508 | 128,0 | 1,86 | 6,37 | 1,60 | 79,8 | 0,61 | 3,29 |
Cooling capacity | COP | EER | P1 | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
[°C/°F] | [W] | [Btu/h] | [kcal/h] | [W/W] | [Btu/Wh] | [kcal/Wh] | [W] | [A] | [kg/h] | ||
-25 -13 | 42,1 | 144 | 36,2 | 0,86 | 2,94 | 0,74 | 48,9 | 0,50 | 0,91 | ||
-23 -10 | 46,9 | 160 | 40,4 | 0,93 | 3,17 | 0,80 | 50,6 | 0,50 | 1,02 | ||
-20 -4 | 57,4 | 196 | 49,4 | 1,06 | 3,62 | 0,91 | 54,2 | 0,51 | 1,25 | ||
-10 14 | 97,1 | 332 | 83,6 | 1,46 | 4,98 | 1,26 | 66,5 | 0,54 | 2,12 | ||
-7 20 | 112,8 | 385 | 97,1 | 1,59 | 5,43 | 1,37 | 70,9 | 0,56 | 2,48 | ||
-5 23 | 121,4 | 415 | 104,5 | 1,66 | 5,67 | 1,43 | 73,2 | 0,57 | 2,67 | ||
0 32 | 148,8 | 508 | 128,0 | 1,86 | 6,37 | 1,60 | 79,8 | 0,61 | 3,29 |
Electrical accessories / wiring diagram
Configuration: Conf. 1
Motorconfiguration: RSIR
Power supply (nominal): 220-240V/50Hz 1~
Refrigerant: R134a
Application: LBP+MBP
Voltage range: 198-254V
Starting torque: LST
Approvals: VDE, EAC
Components:
- a1: PTC starter (220V, 25Ohm, 6.3mm) - 103N0011
- b: plastic cover - 103N0491
- d: cord relief - 103N1010
- g: protection screen for PTC - 103N0476
Alternative components:
- a1: PTC starter (220V, 25Ohm, 4.8mm) - 103N0018
- d: cord relief - 103N1010
- g: protection screen for PTC - 103N0476
A simplified wiring diagram is provided, showing the main winding, start winding, and connections for the PTC starter and other components.