Secop SCE25MNDX Compressor
Single Pack Information and Technical Data
Single Pack Details
Single Pack Code: 195B4783
| Position | Title | Code | Quantity |
|---|---|---|---|
| 1 | Compressor SCE25MNDX | 104H8400 | 1 |
| 2 | Run Capacitor (15µF 450V, 6.3mm) | 117-7167 | 1 |
| 3 | Starting capacitor (60µF 260V, 6.3mm) | 117U5351 | 1 |
| 4 | Bolt joint for one compressor | M6 | ø16mm | 118-1981 | 1 |
Technical Data - Compressor
Model Designation: SCE25MNDX 220-240V/50Hz 1~
Sales Code: 104H8400
Compressor Design
- Oil type: Polyolester
- Oil viscosity: 32cSt
- Oil quantity: 500cm³ / 16.9fl.oz
- Refr. charge - tech. limit: 500g / 17.6oz
- Free gas volume comp.: 3150cm³ / 106.5fl.oz
- Weight: 14.9kg / 32.8lbs
- Motor protection: 1# internal
- Winding resistance main: 2.8Ω (at 25°C)
- Winding resistance aux: 10.9Ω (at 25°C)
- Max. winding temp.: 125°C / 257°F
- Max. discharge temp.: 140°C / 284°F
General - Configurations with SCE25MNDX (Conf. 1)
- Motor configuration: CSCR
- Power supply (nominal): 220-240V/50Hz
- Number of phases: 1
- Voltage range: 198-254V
- Approvals: VDE, CCC, CB
- Starting torque: HST
- Note: Starter kit (relay), cover and cord relief are included and pre-assembled.
Applications with SCE25MNDX (Conf. 1)
- Refrigerant: R290
- Application: MBP
- System cooling: fan 3m/s
- Hot gas defrost: OK
- Long interval pull down: OK
Electrical data - Configurations with SCE25MNDX (Conf. 1)
- Starting device type: relay
- Run capacitor: 15µF
- Start capacitor: 60µF
- LRA (locked rotor amps / 4s/ U(N)): 27.1A
- RLA (rated load amps / 1s/ U(N)): 4.7A
- Cut in current (U(N)): 27.1A
Compressor Dimensions
Housing
- A Height: 236.4mm / 9.31in
- B Height: 230.6mm / 9.08in
- C Length shell: 217mm / 8.54in
- D Length w. cover: 263.4mm / 10.37in
- E Width: 161.1mm / 6.34in
- F Width with equipment: 199mm / 7.83in
Connectors
| Suction | Discharge | Process | ||
|---|---|---|---|---|
| Diameter [mm] | øi 12.81-12.99 | øi 8.11-8.29 | øi 6.11-6.29 | |
| (i:inside, o:outside) [in] | øi 0.5-0.51 | øi 0.32-0.33 | øi 0.24-0.25 | |
| Material | steel/CU | copper | copper | |
| Horizontal angle | +2° | 37° | 37° | |
| Vertical angle | +2° | 36° | 0° | 36° |
| Position I/h/w [mm] | -111/212/57 | 116/127/81 | 110/94/72 | |
| [in] | -4.4/8.3/2.2 | 4.5/5/3.2 | 4.3/3.7/2.8 | |
| Straight tube I. [mm] | 12 | 12 | 12 | |
| [in] | 0.5 | 0.5 | 0.5 |
Compressor fixation
Baseplate:
- [mm]: BL 204, BW 150
- [inch]: BL 8.03, BW 5.9
- Large holes:
- [mm]: LI 165, LW 101.6
- [inch]: LI 6.5, LW 4
- Small holes:
- [mm]: SI 170, SW 70
- [inch]: SI 6.7, SW 2.76
- Hole diameters: Ø 9.7 [0.38], Ø 19 [0.75], Ø 16 [0.63]
- Hole positions: QI 127 [5], QW 127 [5]
Mounting accessories
| Description | one comp. | multi pack |
|---|---|---|
| Bolt joint | M6 | Ø16mm | 118-1917 | 118-1918 |
| Bolt joint | ø1/4" | Ø16mm | 118-1946 | |
| Bolt joint | ø1/4" | ø19mm | 118-1949 | |
| Snap-on | ø7,3 | Ø16mm | 118-1947 | 118-1919 |
Application notes: Provision for PE Grounding is located at the PE Stamp on the compressor.
Electrical Accessories / Wiring Diagram
Configuration: CSCR
Power supply (nominal): 220-240V/50Hz 1~
Refrigerant: R290
Application: MBP
Voltage range: 198-254V
Starting torque: HST
Approvals: VDE, CCC, CB
Ambient/ machine room temperatures minimum /maximum:
- Ambient temperature range: 10-43°C / 50-110°F
- Machine room temperature range: 10-48°C / 50-119°F
- Compressor cooling: fan 3m/s
Operation pressure range
Condensing pressure (sat. temp.):
Graph showing condensing pressure in [bara] vs. evaporating temperature in [°C] and [°F].
Evaporation pressure (sat. temp.):
Graph showing evaporation pressure in [bara] vs. evaporating temperature in [°C] and [°F].
Components (Starter kit (a5)+cover (b) +cord relief (d): pre assembled)
- a5 SC starter kit: 117U8100
- b cover terminal board + clamp: 117U1036
- c start capacitor (60µF): 117U5351
- e run capacitor (15µF, 6.3mm): 117-7167
- e1 retaining clamp: 117-0313
- screw M4x8mm: 117-0301
- d cord relief: 103N1007
Optimization + standard conditions
Evaporating pressure (saturation temperature):
Condensing pressure (saturation temperature):
Return gas temp.:
Liquid temp.:
| Cooling capacity | P1 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| pe | pc | RGT | Tliq | [W] | [Btu/h] | [kcal/h] | [W/W] | [Btu/Wh) | [kcal/Wh] | [W] | [A] | [kg/h] | |
| [°C] | -7 | 54 | 35 | 46 | 2079.2 | 7101 | 1789.4 | 2.01 | 6.85 | 1.73 | 1036.5 | 4.89 | 23.72 |
| [°F] | 20 | 130 | 95 | 115 | |||||||||
| [°C] | -10 | 55 | 32 | 55 | 1659.7 | 5668 | 1428.4 | 1.67 | 5.72 | 1.44 | 991.8 | 4.69 | 20.99 |
| [°F] | 14 | 131 | 90 | 131 | |||||||||
| [°C] | -10 | 45 | 20 | 45 | 1837.9 | 6277 | 1581.7 | 2.08 | 7.12 | 1.79 | 882.0 | 4.20 | 22.57 |
| [°F] | 14 | 113 | 68 | 113 | |||||||||
| [°C] | -7 | 49 | 18 | 49 | 1954.3 | 6674 | 1681.9 | 2.02 | 6.91 | 1.74 | 965.3 | 4.57 | 25.38 |
| [°F] | 20 | 120 | 65 | 120 | |||||||||
| [°C] | -10 | 45 | 32 | 45 | 1913.4 | 6534 | 1646.7 | 2.17 | 7.41 | 1.87 | 882.0 | 4.20 | 21.89 |
| [°F] | 14 | 113 | 90 | 113 | |||||||||
| [°C] | -25 | 45 | 32 | 45 | 1043.8 | 3565 | 898.3 | 1.53 | 5.23 | 1.32 | 681.0 | 3.34 | 11.77 |
| [°F] | -13 | 113 | 90 | 113 |
Performance tables
R290, 220V/50Hz, CSCR, fan 3m/s, VDE, CCC, CB
| Cooling capacity | P1 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| pe | pc | RGT | [°C] | [°F] | [W] | [Btu/h] | [kcal/h] | [W/W] | [Btu/Wh] | [kcal/Wh] | [W] | [A] | [kg/h] |
| -25 | -13 | 1043.8 | 3565 | 898.3 | 1.53 | 5.23 | 1.32 | 681.0 | 3.34 | 11.77 | |||
| cond. pressure | -20 | -4 | 1298.9 | 4436 | 1117.9 | 1.73 | 5.90 | 1.49 | 752.4 | 3.64 | 14.71 | ||
| pc= 45/113 | -15 | 5 | 1585.1 | 5413 | 1364.2 | 1.93 | 6.60 | 1.66 | 819.7 | 3.93 | 18.03 | ||
| return gas temp. | -10 | 14 | 1913.4 | 6534 | 1646.7 | 2.17 | 7.41 | 1.87 | 882.0 | 4.20 | 21.89 | ||
| RGT= 32/90 | 0 | 32 | 2740.5 | 9359 | 2358.5 | 2.78 | 9.48 | 2.39 | 986.9 | 4.67 | 31.79 | ||
| liquid temp | 5 | 41 | 3261.4 | 11138 | 2806.8 | 3.17 | 10.84 | 2.73 | 1027.5 | 4.85 | 38.16 | ||
| Tliq= 45/113 | 10 | 50 | 3868.8 | 13213 | 3329.5 | 3.65 | 12.48 | 3.15 | 1058.6 | 4.99 | 45.72 | ||
| [°C / °F] | -25 | -13 | 868.5 | 2966 | 747.5 | 1.20 | 4.11 | 1.04 | 722.1 | 3.51 | 10.81 | ||
| cond. pressure | -20 | -4 | 1111.2 | 3795 | 956.3 | 1.36 | 4.64 | 1.17 | 817.7 | 3.92 | 13.90 | ||
| pc= 55/131 | -15 | 5 | 1371.2 | 4683 | 1180.1 | 1.51 | 5.16 | 1.30 | 908.0 | 4.31 | 17.24 | ||
| return gas temp | -10 | 14 | 1659.7 | 5668 | 1428.4 | 1.67 | 5.72 | 1.44 | 991.8 | 4.69 | 20.99 | ||
| RGT= 32/90 | 0 | 32 | 2366.5 | 8082 | 2036.7 | 2.08 | 7.12 | 1.79 | 1135.7 | 5.34 | 30.40 | ||
| liquid temp | 5 | 41 | 2807.0 | 9586 | 2415.7 | 2.35 | 8.03 | 2.02 | 1193.7 | 5.60 | 36.40 | ||
| Tliq= 55/131 | 10 | 50 | 3320.2 | 11339 | 2857.4 | 2.68 | 9.14 | 2.30 | 1240.9 | 5.82 | 43.53 |
Safety Information
Warning: Keep electrical equipment clear from oil, chemicals, and water.
Refrigerant: R290 (Flammable gas symbol ⚠️)
Handling instructions:
- Diagram showing incorrect handling of a refrigerant line with a cross mark (❌).
- Diagram showing correct handling of a refrigerant line with a check mark (✔️).
Company Information
Secop GmbH. Lise-Meitner-Straße 29 • 24941 Flensburg, Germany • Tel: +49 46149410 • www.secop.com
Secop does not assume responsibility for possible errors in catalogs, brochures, and other printed material. Secop reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequent changes being necessary to specifications already agreed. All trademarks in this material are the property of the respective companies. Secop and the Secop logotype are trademarks of Secop GmbH. All rights reserved.
