ACTIVESHOP Giovanni D-21 Vapozoon with Magnifying Lamp

Product Overview

The ACTIVESHOP Giovanni D-21 Vapozoon is a multifunctional device featuring warm steam and ozone. It is characterized by high-quality workmanship and intuitive operation, offering an excellent solution for any beauty salon. The device is lightweight, functional, and stable on its stand, with a telescopic arm for quick height adjustment. The Vapozoon is mounted on a height-adjustable stand.

Device Functions

• Disinfects the skin
• Expands pores
• Simplifies the removal of blackheads and dead skin through deep steam penetration into the skin
• Facilitates toxin excretion
• Moisturizes and refreshes the skin
• Stimulates skin circulation
• Significantly improves massage results

Specifications

Key Components:

• 1. On/Off switch
• 2. Timer
• 3. Filling opening/material port
• 4. Swivel arm tube
• 5. Light On/Off switch
• 6. Magnifying lens x3
• 7. Hot steam outlet nozzle
• 8. Spray tube
• 9. Main body
• 10. Telescopic leg (upper post; 2in1)
• 11. Telescopic leg (lower post)
• 12. Base
• 13. Wheels
• 14. Water tank lids
• 15. Water tank

User Guide

1. Place the device on a stable, flat surface.
2. Ensure the hot water seal is tightened. Fill the water tank until the level approaches MAX.
3. Set the desired operating time using the timer knob (0 to 30 minutes).
4. Turn the device on by pressing the on/off button. The device will begin heating the water, and the UV light will illuminate. Steam will start spraying approximately 5 minutes after the water boils. The time may vary depending on the water quantity.
5. The UV light can be adjusted individually. Press and hold the on/off button for 5 seconds to turn the UV light on or off.
6. When steam begins to emerge, bring the device closer to the client's face. The ideal distance between the nozzle and the client's face is at least 20 cm.
7. If the device is not used for an extended period, empty the water and dry the tank.

Important Information

Attention!!! Do not bring the device too close to the client's face or body. There is a risk of serious skin burns.

Warning! Do not tilt or tip the device during operation. Do not use the device if it is empty of water.

Warning!!! Do not pour essential oils or other liquids into the water tank besides water. This may cause damage to the device or personal injury.

Recommendations:

• 1. Never leave the connected device unattended. Close supervision is necessary when children or disabled persons are using the device, or are near it.
• 2. Use the device for its intended purpose as described in the user manual.
• 3. Never use this device if its cord or plug is damaged. Do not use the device if it malfunctions, has been dropped, damaged, or fallen into water.
• 4. Never use the device while sleeping.
• 5. Use the device only on a flat surface.
• 6. Never use the device too close to the skin, as there is a risk of burns.
• 7. Do not add essential oils or other additives to the water in the tank. Otherwise, the device may be damaged.
• 8. Do not use the device if it is empty of water.
• 9. Do not pour any additives into the water tank.
• 10. Clean the water tank regularly. Remember to turn off the device and unplug it from the power outlet before cleaning.
• 11. Do not touch the hot water tank.
• 12. Do not touch the water tank when the device is switched on.
• 13. When finished, empty the water and dry the tank.

Device Assembly

Assembly Steps (Follow the diagram below):

Diagram Description: The assembly involves connecting the base, telescopic legs, main body, swivel arm, spray tube, steam nozzle, and magnifying lamp.

Caution!!! Do not use a coarse cloth to clean the lens. Doing so may scratch the lens and reduce its clarity.

Warning!!! Do not expose unprotected eyes to direct LED light, as it may cause discomfort or damage your vision.

Warning!!! The water tank must be cleaned regularly. Disconnect the device from the power outlet before removing the water tank.

Parts Identification:

• A: Base with wheels
• B: Lower telescopic leg
• C: Upper telescopic leg (2in1)
• D: Main body with water tank
• E: Swivel arm tube
• F: Hot steam outlet nozzle
• G: Spray tube
• H: Magnifying lamp assembly
• I: Light On/Off switch
• J: Main power switch and Timer knob

Assembly Procedure:

1. Step 1: Attach the base (A) to the lower telescopic leg (B).
2. Step 2: Insert the upper telescopic leg (C) into the lower telescopic leg (B).
3. Step 3: Mount the main body (D) onto the upper telescopic leg (C).
4. Step 4: Attach the swivel arm tube (E) to the main body (D).
5. Step 5: Connect the spray tube (G) to the swivel arm tube (E).
6. Step 6: Attach the hot steam outlet nozzle (F) to the spray tube (G).
7. Step 7: Mount the magnifying lamp assembly (H) onto the swivel arm tube (E).
8. Step 8: Connect the light switch (I) and the main power switch/timer (J) to their respective ports on the main body.

Technical Specifications

Device Dimensions

The device height is adjustable within the range of 78-95 cm, allowing for optimal positioning for both the practitioner and the client. The LED magnifying lamp and the vapozoon nozzle can be rotated to extend the therapeutic effect and treatment area.

• Adjustable Height: 78 cm (min) to 95 cm (max)
• Main Body Width: approx. 26 cm
• Main Body Depth: approx. 24 cm
• Arm Extension: approx. 45 cm
• Lamp Head Width: approx. 17 cm
• Base Width: approx. 53 cm
• Height of Main Unit: approx. 18 cm
• Height of Water Tank: approx. 15 cm

Safety Precautions

1. The device is professional equipment used in cosmetic procedures. Use by qualified cosmetologists avoids adverse effects during treatment.
2. Do not disassemble or attempt to use the device for purposes other than those specified in this user manual. All maintenance and repair work must be performed only by an authorized service technician (ACTIVESHOP Sp. z o.o.).
3. Do not install or use the device near liquids, in wet places, or with wet hands, to prevent liquids from entering the device.
4. In the following cases, immediately unplug the device from the socket and contact an authorized service provider (ACTIVESHOP Sp. z o.o.):
   • a) Liquid has entered the device.
   • b) The device emits strange odors, smoke, or makes strange noises.
   • c) The power cord is damaged.
   • d) The device has been dropped or its casing is damaged.
5. Do not place objects on the cords. Do not place the device in a location where someone might step on the power cord.
6. For safety, unplug the power cord from the socket every time you finish working with the device.
7. Do not insert anything into the device openings. If a foreign object enters an opening, unplug the cord and contact the dealer or manufacturer.
8. Do not place the device on an unstable trolley, shelf, or vehicle. The device may be damaged if it falls.
9. To ensure the device's longevity, it is recommended to wait one minute before pressing the power button again (switching on and off alternately).
10. The power supply must comply with the specifications on the data plate. Otherwise, there is a risk that the device will not function correctly or may even burn out.

Precautions

1. In case of damage to the power cord or other malfunctions, contact an authorized service center to avoid danger.
2. This device may be used by children aged 8 and above, and by persons with reduced physical or mental capabilities, or lack of experience and knowledge, provided they are supervised or instructed on the safe use of the device and understand the associated risks.
3. Devices are not intended for children to play with. Do not allow children to play with the device.
4. Do not leave the device unattended when children or persons without sufficient knowledge are using the device nearby.
5. This electrical device is not a toy. Improper use or contact with the electrical device can pose a health risk or cause death, therefore the device should be used and stored out of reach of children.

Disposal

Dispose of used electrical equipment, accessories, and packaging at recycling centers in accordance with environmental protection principles. Electrical equipment must not be disposed of in household waste containers. Follow the regulations for the disposal of this type of equipment. For environmental protection, in accordance with Directive 2012/19/EU on waste electrical and electronic equipment, waste electrical and electronic equipment should be collected separately and handed over to collection points for waste electrical and electronic equipment.

Discarded and old equipment contains fully recyclable components and should therefore be handed over for recycling. Therefore, they should be handed over to appropriate collection points and also to ACTIVESHOP Ltd.

Storage and Transport

The device must be transported in its original packaging at temperatures between (-)20°C and (+)50°C. The device should be kept in a well-ventilated room with relative humidity not exceeding 75%. The operating temperature is between (+)10°C and (+)40°C. During storage and transport, the device must not be dropped or thrown, and must not be exposed to mechanical shocks or weather conditions.