Rheem Water Heater Parts and Accessories Catalog

Introduction

This catalog provides a comprehensive listing of Rheem water heater parts and accessories. Rheem operates a 185,000 sq. ft. distribution center in Randleman, North Carolina, offering OEM replacement parts, parts identification, and aftermarket parts for installation, maintenance, and servicing of HVAC equipment, water heaters, and other residential power equipment.

Rheem National Customer Service:

Customer Service: 800.621.5622
Parts & Accessories: 800.621.5622
Warranty: Visit www.MyRheem.com or www.MyRuud.com
Warranty Fax: 800.535.9538
Email for Parts: parts@rheem.com
Technical Service: 800.HEATER3 (800.432.8373)
Email for Technical Service: techserv@rheem.com
Website: www.rheem.com

For products not listed in this catalog, please contact Rheem National Customer Service at 800.621.5622.

To place an order, call 800.621.5622 or fax 800.535.9538.

Residential Rheem® Electric Water Heater Construction

Key components of an electric water heater:

Temperature and Pressure Relief Valve (T&P Valve): Opens to release water if tank pressure or temperature becomes excessive.
Plastic Lined Nipples/Heat Traps: Thermoplastic lining prevents galvanic corrosion. Heat trap nipples have a check valve to reduce heat loss.
Anode Rod: A replaceable component made of magnesium alloy or other metals to protect the tank from corrosion.
Upper Thermostat: Controls power to the upper heating element and maintains water temperature.
Lower Thermostat: Regulates power to the lower heating element and maintains water temperature.
Heating Elements: The primary components that heat the water. Available in Stainless Steel or Copper, with voltage and wattage dependent on heater capacity.
Cold Water Inlet and Dip Tube: Directs incoming cold water to the bottom of the tank.
Drain Valve: Allows the tank to be emptied for service.

Residential Rheem® Gas Water Heater Construction

Key components of a gas water heater:

Temperature and Pressure Relief Valve (T&P Valve): Similar function to the electric model's T&P valve.
Plastic Lined Nipples/Heat Traps: Same function as in electric models.
Anode Rod: Same function as in electric models.
Thermostat: Regulates power to the heating element and maintains water temperature.
Cold Water Inlet and Dip Tube: Same function as in electric models.
Drain Valve: Same function as in electric models.
Burner Assembly: Heats water using a flame from natural or propane gas.

Electric Water Heater Elements

Screw-In Elements – 1 inch

PART NO	VOLTAGE (V)	WATTAGE (W)	INSERTION DEPTH (IN)	WATT TYPE DENSITY	MOUNTING TYPE	THREAD SIZE - NPSM (IN)	HEX HEAD SIZE (IN)	CASE QTY	CASE REQ
SP10869KL	240	3500	13-1/2	SSR LWD	Screw-in	1	1-1/2	—	—
SP10869MM	240	4500	13-1/2	SSR LWD	Screw-in	1	1-1/2	—	—
SP10869ML	240	4500	15-1/2	SSR LWD	Screw-in	1	1-1/2	—	—
SP10869PH	240	5500	13-1/2	SSR HWD	Screw-in	1	1-1/2	—	—
UV12904	240	4500	13	SS LWD	Screw-in	1	1-1/2	—	—
UV129046PK	240	4500	13	SS LWD	Screw-in	1	1-1/2	6	Yes
SP10874FH	120	1500	7-1/2	CR HWD	Screw-in	1	1-1/2	—	—
SP10874GH	120	2000	7-3/4	CR HWD	Screw-in	1	1-1/2	—	—
SP10552MH	240	4500	13-1/2	CR HWD	Screw-in	1	1-1/2	—	—
SP10552ML	240	4500	13-3/4	CR LWD	Screw-in	1	1-1/2	—	—
UV12890	120	1500	7-5/8	CU HWD	Screw-in	1	1-1/2	—	—
UV1289012PK	120	1500	7-5/8	CU HWD	Screw-in	1	1-1/2	12	Yes
UV12892	120	2000	7-5/8	CU HWD	Screw-in	1	1-1/2	—	—
UV1289212PK	120	2000	7-5/8	CU HWD	Screw-in	1	1-1/2	12	Yes
UV12891	240	1500	7-5/8	CU HWD	Screw-in	1	1-1/2	—	—
UV1289112PK	240	1500	7-5/8	CU HWD	Screw-in	1	1-1/2	12	Yes
UV12893	240	2000	7	CU HWD	Screw-in	1	1-1/2	—	—
UV1289312PK	240	2000	7	CU HWD	Screw-in	1	1-1/2	12	Yes
UV12894	240	2500	9-1/2	CU HWD	Screw-in	1	1-1/2	—	—
UV1289412PK	240	2500	9-1/2	CU HWD	Screw-in	1	1-1/2	12	Yes
UV12895	240	3000	10-5/8	CU HWD	Screw-in	1	1-1/2	—	—
UV1289512PK	240	3000	10-5/8	CU HWD	Screw-in	1	1-1/2	12	Yes
UV12896	240	3500	12-1/8	CU HWD	Screw-in	1	1-1/2	—	—
UV1289612PK	240	3500	12-1/8	CU HWD	Screw-in	1	1-1/2	12	Yes
UV12897	240	3800	13-3/8	CU HWD	Screw-in	1	1-1/2	—	—
UV1289712PK	240	3800	13-3/8	CU HWD	Screw-in	1	1-1/2	12	Yes
UV12898	240	4000	13-1/4	CU HWD	Screw-in	1	1-1/2	—	—
UV13049	240	4500	7-7/8	CU MWD	Screw-in	1	1-1/2	—	—
UV1304912PK	240	4500	7-7/8	CU MWD	Screw-in	1	1-1/2	12	Yes
UV12901	240	4500	11-3/4	CU LWD	Screw-in	1	1-1/2	—	—
UV1290112PK	240	4500	11-3/4	CU LWD	Screw-in	1	1-1/2	12	Yes
UV12899	240	4500	13-1/2	CU HWD	Screw-in	1	1-1/2	—	—
UV1289912PK	240	4500	13-1/2	CU HWD	Screw-in	1	1-1/2	12	Yes
UV12900	240	5500	9-7/8	CU LWD	Screw-in	1	1-1/2	—	—
UV1290012PK	240	5500	9-7/8	CU LWD	Screw-in	1	1-1/2	12	Yes

Screw-In Elements – 1-3/8 inch

PART NO	VOLTAGE (V)	WATTAGE (W)	INSERTION DEPTH (IN)	WATT TYPE DENSITY	MOUNTING TYPE	THREAD SIZE - NPSM (IN)	HEX HEAD SIZE (IN)	CASE QTY	CASE REQ
UV12902	240	4500	13	CU LWD	Screw-in	1-3/8	1-7/8	—	—

Flange Elements

PART NO	VOLTAGE (V)	WATTAGE (W)	INSERTION DEPTH (IN)	WATT TYPE DENSITY	MOUNTING TYPE	CASE QTY	CASE REQ
UV12909	240	3500	12-1/2	CU HWD	Flange	—	—
UV1290912PK	240	3500	12-1/2	CU HWD	Flange	12	Yes
UV13047C	240	4500	7-3/4	CU MWD	Flange	—	—
UV13047C12PK	240	4500	7-3/4	CU MWD	Flange	12	Yes
UV12910	240	4500	13-5/8	CU HWD	Flange	—	—
UV129106PK	240	4500	13-5/8	CU HWD	Flange	6	Yes
UV12911	240	2500	11-1/4	SS LWD	Flange	—	—
UV1291112PK	240	2500	11-1/4	SS LWD	Flange	12	Yes
UV13048	240	4500	13-3/4	SS HWD	Flange	—	—
UV1304812PK	240	4500	13-3/4	SS HWD	Flange	12	Yes

Flat Flange Elements

PART NO	VOLTAGE (V)	WATTAGE (W)	INSERTION DEPTH (IN)	WATT TYPE DENSITY	MOUNTING TYPE	CASE QTY	CASE REQ
UV12907	240	4500	13-1/2	CU HWD	Flat Flange	—	—
UV1290712PK	240	4500	13-1/2	CU HWD	Flat Flange	12	Yes

Element Accessories

Element Wrench

PART NO	DESCRIPTION	CASE QTY	CASE REQ
UV38628	Element Wrench (Fits 1-1/2 in. Hex)	—	—
UV3862812PK	Element Wrench (Fits 1-1/2 in. Hex)	12	Yes
49057	Element Wrench - Dual (Fits 1-1/2 in. & 1-7/8 in. Hex)	—	—

Element Gaskets & Gasket Kits

PART NO	DESCRIPTION	CASE QTY	CASE REQ
AP6708-9	Gasket - 1 in. Screw-in Element (1-1/4 in. I.D. x 1-1/2 in. O.D. x 5/32 in. thick)	—	—
AP6614J	Gasket - Flange Element (1-1/8 in. I.D. x 1-11/16 in. O.D. x 1/2 in. thick)	—	—
AP10363	Gasket - Flange Element (1-1/4 in. I.D. - 2-1/2 in. x 2-1/2 in. x 1/16 in. thick)	—	—
UV12914	Gasket Kit - Flange Element (Contains AP6708-9, AP6614J, AP10363 & Screws)	—	—
UV129146PK	Gasket Kit - Flange Element (Contains AP6708-9, AP6614J, AP10363 & Screws)	6	Yes

Adapt-O-Flange Element Conversion Kit

PART NO	DESCRIPTION
UV6830	Adapt-O-Flange Element Conversion Kit

Water Heater Repair Kits

Plumbers Packs are all-inclusive tune-up kits for electric water heaters.

Good Plumbers Pack – Non-Resistored Elements

PART NO	CONTENTS	CASE QTY	CASE REQ
UV20018	(2) 4500W screw-in elements (2) Element gaskets Upper Therm-O-Disc thermostat Lower Therm-O-Disc thermostat	—	—
UV2001812PK	(2) 4500W screw-in elements (2) Element gaskets Upper Therm-O-Disc thermostat Lower Therm-O-Disc thermostat	12	Yes

Better Plumbers Pack – Resistored Elements

PART NO	CONTENTS
SP20060	(2) 4500W resistored screw-in elements (2) Element gaskets Upper Therm-O-Disc thermostat Lower Therm-O-Disc thermostat

Thermostats

APCOM Style Thermostats

Skin packaged with detailed instructions

PART NO	LOCATION	TYPE	THERMOSTAT ADJ RANGE (°F)	HIGH LIMIT SETTING (°F)	HIGH LIMIT RESET TYPE	CONTACT TYPE	VOLTAGE (V)	CASE QTY	CASE REQ
UV13359	Upper	Non-Simultaneous	110 to 160	180	Manual	SPDT	208,240,277,480	—	—
UV1335912PK	Upper	Non-Simultaneous	110 to 160	180	Manual	SPDT	208,240,277,480	12	Yes
UV13360	Lower	Non-Simultaneous	110 to 160	—	SPST	120,208,240,277,480	—	—
UV1336012PK	Lower	Non-Simultaneous	110 to 160	—	SPST	120,208,240,277,480	12	Yes

Therm-O-Disc Style Thermostats

Skin packaged with detailed instructions

PART NO	LOCATION	TYPE	THERMOSTAT ADJ RANGE (°F)	HIGH LIMIT SETTING (°F)	HIGH LIMIT RESET TYPE	CONTACT TYPE	VOLTAGE (V)	CASE QTY	CASE REQ
UV11695	Lower	Non-Simultaneous	90 to 150	—	SPST	120,208,240,277,480	—	—
UV1169512PK	Lower	Non-Simultaneous	90 to 150	—	SPST	120,208,240,277,480	12	Yes
UV11698	Upper	Non-Simultaneous	90 to 150	170	Manual	SPDT	208,240,277,480	—	—
UV1169812PK	Upper	Non-Simultaneous	90 to 150	170	Manual	SPDT	208,240,277,480	12	Yes
UV11699	Upper, Lower	Simultaneous	90 to 150	170	Manual	SPST	208,240,277,480	—	—
UV1169912PK	Upper, Lower	Simultaneous	90 to 150	170	Manual	SPST	208,240,277,480	12	Yes
UV11700	Single	90 to 150	170	Manual	SPST	120	—	—
UV1170012PK	Single	90 to 150	170	Manual	SPST	120	12	Yes

Thermostat Covers

PART NO	DESCRIPTION
AP8313-9	Thermostat Cover - Upper
AP8314-9	Thermostat Cover - Lower

Gas Water Heater Parts

Gas Controls – Natural Gas

PART NO	SPECIFICATIONS
SP8555B	Robertshaw - 38,000 BTU/HR / Adjustable 160°F max. 1/2 in. NPT inlet x 1/2 in. inverted flare outlet / 1-1/4 in. shank
SP20166B	White-Rodgers - 38,000 BTU/HR / Adjustable 160°F max. 1/2 in. NPT inlet x 1/2 in. inverted flare outlet / 1 in. shank

Gas Controls – LP Gas

PART NO	SPECIFICATIONS
SP12258B	Robertshaw - 38,000 BTU/HR / Adjustable 160°F max. 1/2 in. NPT inlet x 1/2 in. inverted flare outlet / 1-1/4 in. shank

Pilot Burner Assemblies

These Pilot Burner Assemblies are for Pre-FVIR models only.

PART NO	DESCRIPTION
SP8980B	Pilot Burner Assembly - Natural Gas
SP8980C	Pilot Burner Assembly - LP

Thermocouple Kits

Kit contains thermocouple and positioning adapters.

PART NO	CAPILLARY TUBE LENGTH (IN)	BULB LENGTH (IN)	BULB DIA (IN)	BULB END CONNECTIONS	GAS VALVE END FITTING OD (IN)
UV6379L	18	2-11/64	3/16	Nut, Push-in Clip	11/32
UV6379R	24	2-11/64	3/16	Nut, Push-in Clip	11/32
UV6379H	30	2-11/64	3/16	Nut, Push-in Clip	11/32
UV6379S	36	2-11/64	3/16	Nut, Push-in Clip	11/32
UV6379T	48	2-11/64	3/16	Nut, Push-in Clip	11/32

Installation Accessories

Flexible Water Connector

Copper flexible water connectors.

PART NO	LENGTH (IN)	FITTING 1 TYPE	FITTING 1 SIZE - NPT (IN)	FITTING 2 TYPE	FITTING 2 SIZE - NPT (IN)	CONNECTOR TUBE OD (IN)	MATERIAL	QTY PACKAGE
UV10351	12	Female	3/4	Female	3/4	3/4	Copper	2
UV10505	15	Female	3/4	Female	3/4	3/4	Copper	2
UV10506	18	Female	3/4	Female	3/4	3/4	Copper	2
AP13006	24	Female	3/4	Female	3/4	3/4	Copper	1

Stainless Steel Flexible Water Connectors

PART NO	LENGTH (IN)	FITTING 1 TYPE	FITTING 1 SIZE - NPT (IN)	FITTING 2 TYPE	FITTING 2 SIZE - NPT (IN)	CONNECTOR TUBE OD (IN)	MATERIAL	QTY PACKAGE
UV12927	12	Female	3/4	Female	3/4	3/4	Stainless Steel	2
UV12928	15	Female	3/4	Female	3/4	3/4	Stainless Steel	1
UV12929	18	Female	3/4	Female	3/4	3/4	Stainless Steel	1

Flexible Gas Connectors

PART NO	LENGTH (IN)	FITTING 1 TYPE	FITTING 1 SIZE - NPT (IN)	FITTING 2 TYPE	FITTING 2 SIZE - NPT (IN)	CONNECTOR TUBE OD (IN)	CONNECTOR TUBE ID (IN)
AP10350	18	Female	1/2	Male	1/2	1/2	3/8
AP13014	24	Female	1/2	Male	1/2	1/2	3/8
AP13013	48	Female	1/2	Male	1/2	1/2	3/8

Water Heater Installation Kits

Gas Installation Kits

PART NO	WATER CONNECTOR LENGTH (IN)	FLEX LINE (2)	WATER NIPPLE (2)	TEFLON TAPE	COMP FTNG (2)	FLEX GAS CON (2)	GAS LINE TAPE	WIRE NUT (2)	CASE QTY	CASE REQ
UV20015	12	✔️	✔️	✔️	✔️	✔️	—	—	—	—
UV20016	15	✔️	✔️	✔️	✔️	✔️	✔️	—	—
UV2001612PK	15	✔️	✔️	✔️	✔️	✔️	✔️	—	12	Yes
UV20017	18	✔️	✔️	✔️	✔️	—	—	—	—

Electric Installation Kits

PART NO	WATER CONNECTOR LENGTH (IN)	FLEX LINE (2)	WATER NIPPLE (2)	TEFLON TAPE	COMP FTNG (2)	FLEX GAS CON (2)	GAS LINE TAPE	WIRE NUT (2)	CASE QTY	CASE REQ
UV20012	12	✔️	✔️	✔️	—	—	—	—	—	—
UV20013	15	✔️	✔️	✔️	—	✔️	—	—	—	—
UV20014	18	✔️	✔️	✔️	—	—	—	—	—	—

Water Heater Parts

Compression Fittings

PART NO	PACKAGE TYPE	QTY PER PACKAGE	FITTING 1 SIZE PLUMBING (IN)	FITTING 1 TYPE	FITTING 2 SIZE NPT (IN)	FITTING 2 TYPE	MATERIAL	CASE QTY	CASE REQ
UV10354	Skin Package	2	1/2	Compression	3/4	Pipe thread	Brass	—	—
UV10374	Skin Package	2	3/4	Compression	3/4	Pipe thread	Brass	—	—

Dielectric Unions

PART NO	PACKAGE TYPE	QTY PER PACKAGE	FITTING 1 SIZE PLUMBING (IN)	FITTING 1 TYPE	FITTING 2 SIZE NPT (IN)	FITTING 2 TYPE	MATERIAL	CASE QTY	CASE REQ
AP13045	—	1	3/4	Sweat	3/4	Female pipe thread	Brass/Zinc plated steel	—	—
AP1304512PK	Bulk	—	3/4	Sweat	3/4	Female pipe thread	Brass/Zinc plated steel	12	Yes

Nipples – Plastic Lined

PART NO	PACKAGE TYPE	QTY PER PACKAGE	THREAD SIZE NPT (IN)	LENGTH (IN)	HEAT TRAP TYPE	MATERIAL	CASE QTY	CASE REQ
UV8397G	Skin Package	2	3/4	2-1/4	—	Zinc plated steel/Polypropylene liner	—	—
UV8397G12PK	Skin Package	2	3/4	2-1/4	—	Zinc plated steel/Polypropylene liner	12	Yes
AP8397N-8	Bulk	1	3/4	3	—	Zinc plated steel/Polypropylene liner	—	—

Nipples – Plastic Lined/Heat Trap

PART NO	PACKAGE TYPE	QTY PER PACKAGE	THREAD SIZE NPT (IN)	LENGTH (IN)	HEAT TRAP TYPE	MATERIAL	CASE QTY	CASE REQ
SP20003	Skin Package	2	3/4	3	Ball	Zinc plated steel/Polypropylene liner	—	—
UV12992	Skin Package	2	3/4	3	Flapper	Zinc plated steel/Polypropylene liner	—	—
UV1299212PK	Skin Package	2	3/4	3	Flapper	Zinc plated steel/Polypropylene liner	12	Yes

Drain Valves

PART NO	BODY MATERIAL	SHANK LENGTH	HANDLE TYPE	TANK FITTING SIZE NPT (IN)	CASE QTY	CASE REQ
SP12112S	Brass	3	Screwdriver	3/4	—	—
UV12039	Poly	2-1/4	Handgrip	3/4	—	—
UV1203912PK	Poly	2-1/4	Handgrip	3/4	12	Yes

T&P Valves

PART NO	TEMP SETTING (°F)	PRESSURE SETTING (PSI)	CSA CAPACITY (BTU/HR)	BODY LENGTH (IN)	SENSOR LENGTH (IN)	INLET THREAD SIZE - NPT (IN)	OUTLET THREAD SIZE - NPT (IN)	CASE QTY	CASE REQ
SP8346	210	150	105,000	4-1/4	3	3/4	3/4	—	—
UV6571B	210	150	105,000	3-1/4	4	3/4	3/4	—	—
UV6571B12PK	210	150	105,000	3-1/4	4	3/4	3/4	12	Yes

Water Heater Parts (Continued)

Run-Off Tubes

PART NO	CONFIGURATION	END FITTING	TUBE LENGTH (IN)
SP11955C	Side mount	3/4 in. NPT	42
SP11956B	Top mount	3/4 in. NPT	8 Vertical / 62 Horizontal

Dip Tubes

PART NO	END FITTING	TUBE DIAMETER (IN)	TUBE LENGTH (IN)
AP12933	3/4 in. NPT close nipple	3/4	53
SP11248R	Flare	3/4	54

Anode Rods – Aluminum

PART NO	LENGTH (IN)	ROD DIAMETER (IN)	MATERIAL	HEX HEAD SIZE (IN)
AP12938	42	0.625	Aluminum	1-1/16

Anode Rods – R Tech Resistor Magnesium

PART NO	LENGTH (IN)	ROD DIAMETER (IN)	MATERIAL	HEX HEAD SIZE (IN)
SP11309C	44	0.7	Magnesium	1-1/16
SP11526C	44	0.9	Magnesium	1-1/16

Anode Rods – Magnesium

PART NO	LENGTH (IN)	ROD DIAMETER (IN)	MATERIAL	HEX HEAD SIZE (IN)
SP11524C	44	0.840	Magnesium	1-1/16
SP11524Z	58	0.840	Magnesium	1-1/16

Flexible Anode Rods – R Tech Resistor Magnesium

For installations without the overhead clearance normally required for anode rod replacement; consists of four 12 in. sections with flexible linkages.

PART NO	LENGTH (IN)	ROD DIAMETER (IN)	MATERIAL	HEX HEAD SIZE (IN)
SP8371B	54	0.9	Magnesium	1-1/16

Water Heater Insulation Blankets

PART NO	DESCRIPTION	CASE QTY	CASE REQ
SP57/11C	Water Heater Blanket R11 – 3 in. x 48 in. x 75 in.	4	Yes
SP57/5	Water Heater Blanket R5 – 1.5 in. x 48 in. x 75 in.	4	Yes
SP57/67	Water Heater Blanket R6.7 – 2 in. x 48 in. x 75 in.	4	Yes

Drain Pans – Plastic

Durable plastic drain pans with 1 in. glue PVC fitting; for electric water heaters only.

PART NO	QTY PER PACK	DIAMETER - BOTTOM (IN)	HEIGHT (IN)	MATERIAL
AP12934	1	20	2-3/4	Plastic
AP12937	1	22	2-3/4	Plastic
AP12935	1	24	2-3/4	Plastic
AP12936	1	26	2-3/4	Plastic

Drain Pans – Aluminum

Aluminum drain pans with 1 in. glue PVC fitting; for gas or electric water heaters.

PART NO	QTY PER PACK	DIAMETER - BOTTOM (IN)	HEIGHT (IN)	MATERIAL
AP12939	1	20	2-1/8	Aluminum
AP12941	1	22	2-1/8	Aluminum
AP12942	1	24	2-1/8	Aluminum
AP13033	1	26	2	Aluminum
AP13325	1	30	2-1/8	Aluminum

Expansion Tanks

PART NO	DESCRIPTION
RRT-5	RRT Therm-X-Guard expansion tank – 2.5 gal.
RRT-12	RRT Therm-X-Guard expansion tank – 5 gal.

Water Heater Stand

Durable galvanized steel stand

Recommended for 30-50 gal. capacity gas water heater protection

Easy screw and nut assembly

PART NO	DESCRIPTION	CASE QTY	CASE REQ
AP13044	Water Heater Stand – 18 gauge – 21 in. x 21 in. x 18 in., 650 lb weight limit	—	—
AP130443PK	Water Heater Stand – 18 gauge – 21 in. x 21 in. x 18 in., 650 lb weight limit	3	Yes

	Rheem Water Heater Parts & Accessories Product Catalog Comprehensive product catalog detailing Rheem water heater parts and accessories. Features electric and gas water heater components, including elements, thermostats, gas controls, installation accessories, anode rods, drain valves, and more, with detailed specifications and part numbers.
	Rheem 4 Star Gas 90L Water Heater (Model 347090) - Specifications and Features Detailed specifications, features, and dimensions for the Rheem 4 Star Gas 90L water heater, model 347090. Includes energy efficiency, recovery rate, gas consumption, and connection sizes.
	Rheem Indirect Water Heater Instruction Manual: Installation, Operation, and Maintenance Comprehensive instruction manual for Rheem Indirect Water Heaters (STID models). Covers installation, specifications, operation, maintenance, troubleshooting, and warranty information for Rheem Manufacturing Company products.
	Rheem Tankless Electric Water Heaters: Continuous Hot Water Solutions Explore Rheem's range of tankless electric water heaters, offering continuous hot water on demand for residential and commercial point-of-use applications. Features, specifications, and model details for RTE series.
	Rheem Water Heater Parts and Cross-Reference Guide A comprehensive guide to Rheem water heater parts, including electric and gas models, replacement parts, and cross-reference charts for various series and controls.
	Rheem Electric Tankless Series Water Heaters - Specifications and Applications Comprehensive information on Rheem Electric Tankless Series water heaters, detailing features, applications, dimensions, electrical specifications, and flow rate performance for models RTE 3, RTE 7, RTE 9, RTE 13, RTE 18, and RTE 27.
	Rheem Performance Platinum High Efficiency Condensing Tankless Gas Water Heaters Discover the Rheem Performance Platinum™ series of high-efficiency condensing tankless gas water heaters, offering continuous hot water, advanced features, and eco-friendly operation for residential and commercial applications. Explore models ECOH200, ECOH180, and ECOH160 with EcoNet® WiFi capabilities.
	Rheem Water Heater Parts Guide 2011: Residential & Commercial Components Comprehensive 2011 parts and accessories catalog for Rheem, Ruud, Richmond, PerfectFit, GE, and Hotpoint water heating systems. Find replacement parts, diagrams, and contact information.