Verdant VX Series Energy Management Thermostat

Model: VX3-TW-W-LIT* Wireless Energy Management Thermostat With Lighting Control

Key Features:

The Verdant VX3-TW-W-LIT thermostat delivers unprecedented energy savings without compromising guest comfort. New energy efficient building codes have raised the energy performance standards required of commercial buildings. California's Title 24 (Part 6) building code as well as other state building codes founded upon IECC 2015 or 2018 energy efficiency codes have now mandated occupancy-based control of heating and air-conditioning, lighting, outside air dampers, and/or receptacles.

The Verdant VX3-TW-W-LIT thermostat reduces HVAC runtime by dynamically setting back temperature in empty rooms, without disturbing the comfort of occupants.

The thermostat can also power a lighting circuit by using an external relay that receives the thermostat's occupied/unoccupied signal.

The occupancy-based thermostat solution includes a dry contact switch on port J9 of the HVAC controller (see diagram on next page) that closes when occupancy is detected by the onboard sensor or any other remote wireless occupancy sensor.

When occupancy is detected, the dry contact J9 (activated by positioning a jumper in port J10) will close and allow a 24VAC transformer to energize the coil of an external relay R1 installed to control the lighting circuit.

In the absence of occupancy detection, after a configurable amount of time, the J9 switch will open and interrupt the flow of power to the lighting relay.

The Verdant thermostat and Verdant HVAC Controller communicate wirelessly for a simple and effortless installation. The Verdant HVAC Controller connects to the HVAC unit using a standard wire harness.

In the case of a mini split or VRF unit, please contact Verdant Sales for the applicable part number.

Verdant's combined solution offers building owners a cost effective energy management system that can be deployed with minimal accessories, and little to no extra labor, making it simple to install.

The VX3-TW-W-LIT thermostat facilitates building-code compliance by addressing the following requirements:²†

IECC 2015

  1. C405.2.4.3 Specific application controls for sleeping units.

IECC 2018

  1. C.403.7.6 Automatic Control of HVAC system serving guestrooms integrally.
  2. C405.2.4.2 Specific application controls for sleeping units

Title 24 Part 6

  1. Section 130.1(c)8 Shut-off controls for Hotel/Motel guestrooms.
  2. Section 120.2(e) Shut-off and Reset Controls for Space-conditioning Systems
  3. Section 130.5(d) Circuit Controls for 120V Receptacles and Controlled Receptacles.

¹ Requires a network access license for each thermostat (Part Number: XMF) and one "Online Connection Kit" (Part Number: ZX-OL-U). Additional fees apply.

² In jurisdictions where building code mandate any of the undermentioned measures, additional software licenses (Part Number: XMF) and one (1) Online Connection Kit are required. Additional fees apply.

* SKU VX3-TW-W-LIT includes the VX-TW thermostat, ZX-LV HVAC Controller, and ZX-AOS Occupancy Sensor as one (1) kit. Also available in black. For black, replace W with B.

Technical Specifications

Thermostat

HVAC Controller

Occupancy Sensor

General

Typical HVAC Applications

Diagram Description:

The diagram illustrates the wiring connections for the Verdant VX Series thermostat system. It shows the Thermostat powered by batteries, connected wirelessly to the HVAC Controller. The HVAC Controller connects to the HVAC Unit via terminals J3 (C to GH). The diagram also shows the Wireless Occupancy Sensor (AOS) communicating with the HVAC Controller via a 900MHz signal. A 24VAC transformer powers the HVAC Controller. The diagram details connections for line voltage power feed, thermostat terminals, HVAC unit terminals (J3), controller card terminals (J2, J4, J5, J10, J11, J19), and connections to lighting circuits via an external relay (MR1). It indicates that the AOS communicates to the HVAC Controller via a 900MHz signal and that 24VAC is supplied from a transformer.

FCC Compliance Statement:

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. PURSUANT TO PART 15.21 OF THE FCC RULES, ANY CHANGES OR MODIFICATIONS TO THIS EQUIPMENT NOT EXPRESSLY APPROVED BY VERDANT ENVIRONMENTAL TECHNOLOGIES, INC. MAY VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

Patents:

US PATENTS: 8,369,994; 8,141,791; 7,918,406; 7,841,542; 7,838,803; RE40,437; 7,232,075; 7,185,825; 7,156,318; 7,152,806; 7,145,110; 7,058,477; 7,050,026; 7,028,912; 6,902,117; 6,789,739; 6,786,421; 6,619,555; 6,581,846; 6,578,770; CANADIAN PATENTS: CA2615065; CA2633113; CA2633121; CA2633200; OTHER PATENTS PENDING.

Verdant Energy Management Solutions reserves the right to make changes, without notice, in design or components as progress in engineering and manufacturing methods may warrant. Product appearance may vary. © Verdant Energy Management Solutions, 2022

Emerson is a trademark of Emerson Electric Co. ©2022 Emerson Climate Technologies, Inc. All rights reserved.

PDF preview unavailable. Download the PDF instead.

VX3-TW-W-LIT Adobe PDF Library 16.0.3 Adobe InDesign 17.0 (Windows)

Related Documents

Preview VX Series Energy Management Thermostat
The Verdant VX-TL-KT-W Wireless Energy Management Thermostat with Lighting Control offers unparalleled energy savings and facilitates compliance with energy efficiency codes like Title 24 and IECC 2015/2018. It features occupancy-based control for HVAC, lighting, and receptacles, and online management capabilities.
Preview Verdant VX4 Series Product Catalog and Accessories
A comprehensive catalog of Verdant VX4 series energy management thermostats, including standalone and networked models, along with various accessories for lighting, door lock integration, sensors, HVAC control, and wiring.
Preview Verdant VX Series Wireless Energy Management Thermostat User Guide | Installation & Features
Comprehensive user guide for the Verdant VX Series Wireless Energy Management Thermostat. Learn about installation, configuration, and features like occupancy sensing, wireless networking, and HVAC system compatibility for improved energy efficiency and comfort.
Preview Verdant ZX Series ZX-TW-KT Wireless Energy Management Thermostat Specifications
Detailed specifications for the Verdant ZX Series ZX-TW-KT Wireless Energy Management Thermostat, highlighting features like energy savings, occupancy sensing, wireless connectivity, and typical HVAC applications.
Preview Verdant VXDB-TW-KT-W VX Series Wireless Thermostat Installation Manual
Comprehensive installation manual for the Verdant VXDB-TW-KT-W VX Series Wireless Thermostat with Occupancy Sensor. Covers network setup, thermostat configuration, accessory management, and troubleshooting for efficient HVAC energy savings.
Preview Verdant VX Series VX-TW-KT-W Wireless Energy Management Thermostat
Discover the features and technical specifications of the Verdant VX Series VX-TW-KT-W Wireless Energy Management Thermostat, focusing on energy savings, guest comfort, and advanced control capabilities.
Preview Verdant VX4 Wired Series User Guide: Energy Management Thermostat
Comprehensive user guide for the Verdant VX4 Wired Series Energy Management Thermostat, detailing installation, configuration, features, and troubleshooting for enhanced energy savings and comfort.
Preview Verdant VX Series Wireless Thermostat Installation Manual
Installation manual for the Verdant VX Series Wireless Thermostat with Occupancy Sensor, detailing setup, configuration, and operation for optimal energy management in hospitality environments.