MOZA CS V2 Steering Wheel

Product Introduction

• 13-inch standard racing rim
• Aviation grade aluminum alloy frame
• Forged carbon fiber photoelectric magnetic paddle
• RGB sequential shift indicator
• Programmable mechanical buttons
• Customized quick release from real racing
• Wireless or wired power supply and communication technology

Quick Release Manual

Diagrams illustrating the quick release mechanism, showing the connection of the steering wheel to the base.

1. Match the 6 steel ball bearings on the female quick release head of the steering wheel with the 6 grooves on the quick release male head of the base.
2. Press the quick release in the direction of the wheel.
3. The quick release will automatically return to position and lock up. If not, try rotating the wheel slightly or remove and reinstall it.
4. To remove the wheel, press the quick release with both hands and pull the wheel out simultaneously.

Steering Wheel Configuration

Configure the CS V2 steering wheel using the MOZA Pit House software.

• Joystick mode: Select between push buttons or cross keys.
• Indicator switch mode: Choose from three indicator status modes: matching rotating speed, off, and always on.
• Indicators display mode: Select between Mode 1 and Mode 2. Detailed explanations appear on hover.
• Rev speed prompt setting: Four modes available based on the timing relationship between rev speed and shift indicator light: advanced, standard, extreme, and custom mode.
• Brightness adjustment: Adjust the brightness of the shift indicator.
• Indicator color adjustment: Drag a color block to the indicator to change its color.
• Shifter paddle calibration: Click here to calibrate if shifter paddle sensing is abnormal.

Screenshots of the MOZA Pit House software interface for steering wheel settings. The interface displays a 3D model of the steering wheel and various configuration options for joystick mode, indicator lights, and rev speed prompts.

For detailed steering wheel settings and functions, please visit the official website of MOZA Racing at www.mozaracing.com.

Install Heightening Block for Magnetic Paddle

Diagrams illustrating the installation steps for the heightening block for magnetic paddles, showing component placement and tool usage.

Place the steering wheel face down on a flat surface. Use a hexagonal wrench to remove the screw on the side of the shift paddle's trigger lever. Use another wrench to lift the latch from the magnetic paddle side and pull the paddle's trigger lever outward to create space for disassembly/assembly. Remove screws from the shift paddles, attach the heightening block with the provided long screws, and re-secure the latch. The heightening block shortens the distance between magnetic shifter paddles and hands by 8mm.

Install Silence Pad for the Magnetic Paddle

Diagrams illustrating the installation steps for the silence pad for magnetic paddles, showing component placement and tool usage.

Place the steering wheel face down on a flat surface. Use a hexagonal wrench to remove the screw on the side of the trigger lever. Lift the latch from the magnetic paddle side (it's not necessary to push it out completely; separating the trigger lever and latch is sufficient). Apply the silencer pad to the back of the magnetic hole and the square hole on the shifter paddle. If access is difficult, the shifter paddle can be fully removed. Do not apply the silencer pad on the square hole as it is the photoelectric trigger area. Re-secure the latch and tighten the screws.

Packing Details

• 1. CS V2 Steering Wheel
• 2. Tool kit: Hexagonal Wrench / 2 x 8mm aluminum heightening block / 4 x Silence pad

Product Parameters

• Grip Material: microfiber leather
• Frame Material: aluminum
• Face Plate Material: aluminum
• Magnetic paddle Material: forged carbon fiber
• Size: 13 inch
• Magnetic Paddle: 2 pcs Mechanical
• Keys: 6
• Front-Facing knobs: 2 pcs (20-segment embedded steel ball type)
• Universal Joystick: 2 pcs (pressable)
• Highlighted LED RGB Light Beads: 10 pcs
• LED Color: 7 colors for customization
• Intelligent Telemetry: yes
• Adjust Lighting through MOZA Pit House: yes
• Quick Release: yes
• Power Supply Method: wireless and wire
• Signal Transmission Method: wireless
• Magnetic paddle sensor: contactless photoelectric sensor

Warranty Information

Product Model: [Model Number not specified in OCR]

User Name: [Name not specified]

Product Barcode: [Barcode not specified]

Purchase Date: [Date not specified]

User Phone: [Phone not specified]

Contact Address: [Address not specified]

Dealer Information: [Dealer Stamp/Signature Area]

Warranty Terms

Warranty Period: 12 months for base, steering wheel, pedals, and instrument display from the date of purchase. Outer casing, manual, cables, screws, wrenches, and packaging are not covered under the "one-year free warranty service" but may be available for paid service.

Exclusions from Free Warranty Service:

• Exceeding the validity period of the "three guarantees" (consumer rights protection).
• Lack of "three guarantees" certificate and valid invoice, unless proof of purchase within the warranty period is provided.
• Warranty certificate model does not match the repaired product model or has been altered.
• Damage caused by unauthorized repairs by non-company authorized personnel.
• Damage caused by force majeure (acts of God).
• Damage caused by failure to use, maintain, or service the product according to the user manual.

Warranty periods may vary by product component and country/region. For specific warranty terms in your region, please consult MOZA official channels or authorized MOZA distributors.

A 'Certificate of Quality' seal with 'PA' and 'SS' markings, indicating quality inspection.