Aqara WB-R02D Wireless Mini Switch T1 User Manual

Product Introduction

The Aqara Wireless Mini Switch T1 is a new type of wireless remote switch that supports three control modes: single click, double click, and long press. It can be placed randomly in the desired location or inserted for installation and use. It enables rich intelligent scenes by connecting to a hub and pairing with other smart devices.

A white, square-shaped Aqara Wireless Mini Switch T1 device.

An Aqara hub is required. Some functions require specific Aqara hub models. For more details, please visit www.aqara.com/support.

Device Binding and Initialization

Before activating the accessory, please ensure you have downloaded the Aqara Home app and installed an Aqara hub.

Open the app, tap Home, and then tap + in the top right corner to enter the Add Device (Accessory) page.

Select 'Wireless Mini Switch T1' and add it according to the instructions.

For details, please visit www.aqara.com/support or scan the QR code below to get the detailed electronic manual:

https://prd.aqara.com/manual/?mid=manual.1094919369124102144

If the connection fails, move the accessory closer to the hub and try again.

Product Specifications

Model: WB-R02D

Battery: CR2032

Wireless Protocols: Zigbee 3.0

Dimensions: ø45 × 45 × 12 mm (1.77 × 1.77 × 0.47 inches)

Zigbee Operating Frequency: 2405-2480 MHz

Maximum Zigbee Output Power: ≤ 13 dBm

Operating Temperature: -10 °C ~ 50 °C (14 °F ~ 122 °F)

Operating Humidity: 0~95% RH, no condensation

What's in the box: Wireless Mini Switch T1 × 1, Sticker × 1, User Manual × 1

Manufacturer: Lumi United Technology Co., Ltd.

Address: Room 801-804, Building 1, Chongwen Park, Nanshan iPark, No. 3370, Liuxian Avenue, Fuguang Community, Taoyuan Residential District, Nanshan District, Shenzhen, China

Online Customer Service: www.aqara.com/support

E-mail: support@aqara.com

Warnings

1. This product is NOT a toy. Keep children away from this product.
2. This product is intended for indoor use only. DO NOT use in damp environments or outdoors.
3. Be mindful of moisture, DO NOT spill water or other liquids on the product.
4. DO NOT place this product near heat sources. DO NOT place it in an enclosed space without normal ventilation.
5. DO NOT attempt to repair this product yourself. All repairs should be performed by an authorized professional.
6. This product is only suitable for enhancing entertainment, convenience of your home life, and reminding you of device status. It MUST NOT be used as a safety device for homes, buildings, warehouses, or other locations. If the user violates the product usage instructions, the manufacturer is NOT responsible for any risks and property damage.

Precautions

1. Risk of explosion if the battery is replaced by an incorrect type.
2. Dispose of used batteries according to instructions.
3. Do not ingest battery, risk of chemical burns.
4. This product contains a coin/button battery. If swallowed, a coin/button battery can cause severe internal burns in just 2 hours and can lead to death.
5. Keep new and used batteries out of reach of children.
6. If the battery compartment cannot be securely closed, stop using the product and keep it out of reach of children.
7. If you think batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention.
8. Disposing of a battery in a fire or hot oven, or mechanically crushing or cutting a battery, may result in an explosion.
9. Leaving a battery in an extremely high-temperature environment may cause an explosion or leakage of flammable liquid or gas.
10. A battery subjected to extremely low air pressure may cause an explosion or leakage of flammable liquid or gas.
11. The device is only suitable for mounting at heights ≤ 2 m.

Under normal usage conditions, this device should be kept at a distance of at least 20 cm between the antenna and the user's body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Regulatory Compliance

EU Declaration of Conformity

Lumi United Technology Co., Ltd hereby declares that the radio equipment type [Wireless Mini Switch T1, WB-R02D] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.aqara.com/DoC/

UK Declaration of Conformity

Lumi United Technology Co., Ltd hereby declares that the radio equipment type [Wireless Mini Switch T1, WB-R02D] is in compliance with Directive 2017 (SI 2017 No. 1206, as amended by SI 2019 No. 696). The full text of the UK declaration of conformity is available at the following internet address: http://www.aqara.com/DoC/.

Information on Disposal and Recycling of WEEE

All products marked with this symbol [Symbol indicating WEEE] are Waste Electrical and Electronic Equipment (WEEE according to Directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, designated by the government or local authorities. Proper disposal and recycling will help prevent potential negative impacts on the environment and human health.

Contact your installer or local authorities for more information on the location and conditions of such collection points.

The symbol on the product or its packaging means that this product cannot be treated as household waste. Instead, it must be handed over to the appropriate collection point for the recycling of electrical and electronic equipment.

FCC ID: 2AKIT-AR001

Federal Communications Commission (FCC) Compliance Statement:

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference, and
3. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be corrected by turning the device on and off, users are advised to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Industry Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital device complies with Canadian ICES-003.

This device complies with Industry Canada's RSS-247. Operation is subject to the condition that this device does not cause harmful interference.

This device complies with IC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Documents / Sources

Reference

Aqara WB-R02D T1 Wireless Mini Switch [pdf] User Manual

Related terms: WB-R02D, WB-R02D Wireless Mini Switch T1, Wireless Mini Switch T1, Mini Switch T1, Switch T1

Product Support: Aqara Smart Device Product Support