60 WATT MEDICAL & ITE POWER SUPPLIES

Brand: FSP

Description

The PMP60N1 series of AC/DC switching power supplies are for 60 watts of continuous output power. They are enclosed in a 94V-0 rated polycarbonate case with an IEC320/C14 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011, EN55032 class B emission limits, and are designed for medical and ITE applications.

Features

Operation up to 5000 meters
Optional on/off switch
Optional output connectors
100% burn-in
Wide input range 90-264 VAC
Input surge current protection
Overvoltage protection
Overcurrent protection
Compliant with DoE Efficiency level VI requirements (except PMP60N1-12)
Compliant with RoHS requirement

Safety Standard Approvals

UL ES 60601-1, CSA C22.2 No. 60601-1, File No. E178020
TÜV EN 60601-1
UL 62368-1, CSA C22.2 No. 62368-1
TÜV EN 62368-1

[Logos for CULUS, TÜV Rheinland, CE, RoHS, VI are present but not included in HTML output as per instructions.]

Input Specifications

Input voltage: 90-264 VAC
Input frequency: 47-63 Hz
Input current: 1.22 A (rms) for 100 VAC, 0.68 A (rms) for 240 VAC
Earth leakage current: 200 μA max. @ 264 VAC, 63 Hz
Touch current: 100 μA max. @ 264 VAC, 63 Hz

Output Specifications

Output voltage /current: See output rating chart.
Maximum output power: See output rating chart.
Ripple and noise: 1% peak to peak maximum
Over voltage protection: Set at 112-140% of its nominal output voltage, automatic recovery
Short circuit protection: Automatic recovery
Over temperature protection: Automatic recovery
Temperature coefficient: ±0.04% /°C maximum
Transient response: Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 µs after a 25% step load change

Environmental Specifications

Operating temperature: -20°C to +60°C
Storage temperature: -40°C to +85°C
Relative humidity: 5% to 95% non-condensing
Temperature derating: Derate from 100% at +40°C linearly to 50% at +60°C

General Specifications

Switching frequency: 20 kHz-130 kHz
Efficiency: See output rating chart
Hold-up time: 20 ms typical at 110 VAC
Line regulation: ±0.5% maximum at full load
Inrush current: 60 A @ 115 VAC or 120 A @ 230 VAC, at 25°C cold start
Withstand voltage: 5600 VDC from input to output (2 MOPP), 2100 VDC from input to ground (1 MOPP), 700 VDC from output to ground (To verify AC strength, get correct test method to avoid power supply damage.)

MTBF

150,000 hours minimum at full load at 25°C ambient, calculated per MIL-HDBK-217F

EMC Performance

EN55011/EN55032: Class B conducted, class B radiated
EN61000-3-2: Harmonic distortion, class A and D
EN61000-3-3: Line flicker
EN60601-1-2, EN55024:
EN61000-4-2: ESD, ±15 KV air and ±8 KV contact
EN61000-4-3: Radiated immunity, 9-28 V/m for 80-2500 MHz
EN61000-4-4: Fast transient/burst, ±2 KV
EN61000-4-5: Surge, ±1 KV diff., ±2 KV com
EN61000-4-6: Conducted immunity, 10 Vrms
EN61000-4-8: Magnetic field immunity, 30 A/m
EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, 100% reduction for 20 ms

Output Voltage/Current Rating Chart

Model	V1	Max. current	Tol.	Ripple & Noise⁽¹⁾	Max. Output Power	Average Active Efficiency (typical) @ 115 / 230 Vac
PMP60N1-12	11-13 V	5.46 A	±5%	110-130 mV	60 W	88/88%
PMP60N1-13	13-17 V	4.62 A	±5%	130-170 mV	60 W	88/89%
PMP60N1-13-1	17-21 V	3.53 A	±5%	170-210 mV	60 W	89/90%
PMP60N1-14	21-27 V	2.86 A	±5%	210-270 mV	60 W	88/89%
PMP60N1-16	27-33 V	2.23 A	±3%	270-330 mV	60 W	88/89%
PMP60N1-17	33-39 V	1.82 A	±3%	330-390 mV	60 W	88/89%
PMP60N1-18	46-50 V	1.31 A	±3%	460-500 mV	60 W	89/89%

Note 1: Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output.

Mechanical Specifications

The power supply has a compact rectangular form factor. Key features include an IEC320/C14 AC input connector on one side, a 5-pin DIN plug for DC output on another side, an optional ON/OFF switch, and an LED indicator. Dimensions are provided in inches and millimeters. The unit has rubber feet for stability.

Dimensions shown in inches [mm]
Tolerance 0.02 [0.5] maximum
Weight: 600 grams (1.33 lbs.) approx.
Output connector is 5 pin DIN plug, mating with Switchcraft P/N 57GB5F receptacle or equivalent.
To order optional output connectors, add the suffix assigned for a selected connector to the model number (e.g., PMP60N1-12-B2).
To order a model with an on/off switch, add suffix "S" to the model number (e.g., PMP60N1-12-B2-S).

Pin Chart

PIN	Function
1	V1 Return
2	V1 Return
3	+V1
4	V1 Return
5	+V1

Output Power Derating Curve

A line graph illustrates the power derating based on ambient temperature. The Y-axis represents Output Power (%) from 0% to 100%, and the X-axis represents Ambient Temperature (°C) from -20°C to +60°C. The curve shows that the power supply operates at 100% capacity up to +40°C and then linearly derates to 50% capacity at +60°C.

	FSP PU651 Series 600-650W ITE Switching Power Supply Datasheet Detailed datasheet for the FSP PU651 series of 600-650 Watt ITE switching power supplies, covering specifications, features, safety approvals, and mechanical details.
	FSP PU101 Series 80-100W Universal Input AC-DC Switching Power Supply Datasheet Detailed datasheet for the FSP PU101 Series of 80-100 Watt universal input AC-DC switching power supplies. Covers features, specifications, safety approvals, EMC performance, and mechanical details for ITE applications.
	FSP 65W Medical Adapter FSP065 Series Datasheet Technical datasheet detailing the FSP 65W Medical Adapter, FSP065 Series. Provides comprehensive features, input/output specifications, safety approvals, environmental conditions, EMC performance, and output voltage/current ratings for this high-efficiency medical power supply.
	FSP FSP030M-DxA Series 30W Medical Power Supplies Datasheet Technical datasheet for FSP's FSP030M-DxA series of 30W medical AC/DC switching power supplies, detailing features, specifications, safety approvals, and performance characteristics.
	FSP Power Supply Compliance Certificates: UL/CUL Authorization for Medical & Dental Components This document contains UL and CUL compliance certifications and notices for FSP Group Inc. power supplies, specifically models FSP400M-80PA, FSP500M-80PA, and FSP500M-80UA, used in medical and dental equipment.
	FSP Power Supplies: Compliance Certificates for Medical and Dental Applications Compilation of UL Solutions Certificates of Compliance for FSP Group Inc. power supplies, including models FSP400-70MPE, FSP500-70MPE, TMPC-400E, and TMPC-500E, certified for medical and dental equipment.
	FSP 80W ITE Power Supply FSP080-P24 Series Datasheet Technical datasheet for the FSP080-P24 Series, an 80W ITE (Information Technology Equipment) switching power supply. This Class-II PSU offers compact dimensions, low no-load power consumption, and compliance with key safety and EMC standards including IEC 60950-1, IEC 60065-1, IEC 62368-1, and EN 55032 Class B.
	FSP PMP105 Series Power Supplies UL Compliance Certificate (SFD16049278) Certificate of Compliance for FSP PMP105 series power supplies (models PMP105F and PMP105SF), certified by UL for medical and dental equipment. This document, with FSP internal number SFD16049278, confirms compliance with ANSI/AAMI ES60601-1 and CAN/CSA-C22.2 No. 60601-1:14 standards.