FSP 80W ITE Power Supply FSP080-P24 Series Datasheet
Brand: FSP
Features
- Class-II design
- Design meets IEC 60950-1, IEC 60065-1 & IEC 62368-1 safety standards
- Compact dimensions: 2" x 4" x 1.181"
- No load power consumption less than 0.21W
- EN 55032 Class B radiated emission compliant
- High altitude operation up to 5000 meters
- OTP (Over Temperature Protection) & Brown out protection
Safety Standard Approval
Certifications include CE, CB, UL (CUL 62368-1), and CSA (CSAC22.2 NO. 62368-1-14).
Description
This AC-DC switching power supply is housed in a 2 x 4 inch package and features a Class-II design with no-load power consumption less than 0.21W. The PSU delivers 80 watts of continuous power via convection cooling and operates at temperatures up to 50°C. It is suitable for audio & video, display, information, and networking applications.
Input Specifications
| Parameter | Value |
|---|---|
| Input voltage | 90-264 VAC |
| Input frequency | 47-63 Hz |
| Input current | 1.7 A (rms) for 115 VAC; 0.8 A (rms) for 230 VAC |
| No load power consumption | ≤0.21W |
| Touch current | 250 µA max. @ 264 VAC, 63 Hz |
Output Specifications
| Parameter | Value |
|---|---|
| Total output power | 80W |
| Ripple and noise | ±1% |
| Over voltage protection | Set at 130% of nominal output voltage and latch off |
| Short circuit & Over current protection | Output protected to short circuit condition and latch off |
| Over temperature protection | Detected by thermistor and latch off |
| Brown out protection | Set at 65 VAC |
| Temperature coefficient | All outputs ±0.04% /°C maximum |
| Transient response | Maximum excursion of 5% or better on all models, recovering to 1% of final value within 500 µs after a 25% step load change |
Environmental Specifications
| Parameter | Value |
|---|---|
| Operating temperature | -20°C to +70°C |
| Storage temperature | -40°C to +85°C |
| Operating humidity | 5% to 95% non-condensing |
| Derating | Output power derates from 100% at +50°C linearly to 50% at +70°C. Output power derates from 100% at 100 VAC linearly to 90% at 90 VAC. |
General Specifications
| Parameter | Value |
|---|---|
| Efficiency | Refer to rating chart. |
| Power turn on time | 1.0 Sec maxi. |
| Hold-up time | 10 mS minimum @ 100% load & 115 VAC |
| Line regulation | ±0.5% maximum at full load |
| Inrush current | 70A @ 115VAC @ 25°C cold start; 100A @ 230 VAC @ 25°C cold start |
| Operating altitude | 3000 meters |
| Withstand voltage | 3000 VAC from input to output, 1500 VAC from output to FG |
| MTBF | 250,000 hours minimum at full load at 25°C ambient, calculated per BELL CORE SR-332 |
EMC Performance
- EN55032: Class B conducted, Class B radiated
- FCC: Class B conducted, Class B radiated
- VCCI: Class B conducted, Class B radiated
- EN61000-3-2: Harmonic distortion, class A
- EN61000-3-3: Line flicker
- EN61000-4-2: ESD, ±8 KV air and ±4 KV contact
- EN61000-4-3: Radiated immunity, 3 V/m
- EN61000-4-4: Fast transient/burst, ±2 KV
- EN61000-4-5: Surge, ±1 KV diff, ±2 KV com
- EN61000-4-6: Conducted immunity, 3 Vrms
- EN61000-4-8: Magnetic field immunity, 3 A/m
- EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms (criteria A), >95% reduction for 10 ms (criteria A), >95% reduction for 5000 mS (criteria B)
Performance Curves
Input Voltage Derating Curve
The Input Voltage Derating Curve illustrates that the output power remains at 100% across the input voltage range of 90 VAC to 264 VAC.
Output Power Derating Curve
The Output Power Derating Curve indicates that the power supply can deliver 100% of its rated output power up to an ambient temperature of 50°C. Beyond 50°C, the output power derates linearly, reaching 50% of the rated power at 70°C.
Output Voltage/Current Rating Chart
| Model | Output Voltage | Min. Load | Max. Current | Tolerance | Ripple & Noise | Max. Power | Efficiency (115/230 Vac) |
|---|---|---|---|---|---|---|---|
| FSP080-P24-A12 | 12 V | 0 A | 6.67 A | ±3% | 120 mV | 80W | 86/88% |
| FSP080-P24-A24 | 24 V | 0 A | 3.33 A | ±3% | 240 mV | 80W | 87/90% |
| FSP080-P24-A54 | 54 V | 0 A | 1.48 A | ±3% | 540 mV | 80W | 87/90% |
Note: Ripple and noise is the maximum peak-to-peak voltage value measured at the output within a 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 µF tantalum capacitor in parallel with a 0.1 µF ceramic capacitor across the output.
Mechanical Specifications
Dimensions and Weight
Dimensions (L*W*H): 101.6 mm * 50.8 mm * 30 mm / 4" * 2" * 1.181"
Weight: 134 grams (0.295 lbs.) approx.
Connector Pin Assignments
Input Connector (CN100)
| Pin No. | Function | Wafer |
|---|---|---|
| 1 | Line | J.S.T B2P3-VH or equivalent |
| 2 | Neutral | J.S.T B2P3-VH or equivalent |
| 3 | Ground/Chassis Ground | J.S.T B2P3-VH or equivalent |
Matting connector for CN100: J.S.T housing VHR-3N, Crimp PIN SVH-21T-P1.1
Output Connector (CN200)
| Pin No. | Function | Wafer |
|---|---|---|
| 1, 2 | +12V | J.S.T B4P-VH or equivalent |
| 3, 4 | Return | J.S.T B4P-VH or equivalent |
Matting connector for CN200: J.S.T housing VHR-4N, Crimp PIN SVH-41T-P1.1
