Certificate Details
UL Certificate Number: 20160527-E178020
Report Reference: E178020-20160522
Issue Date: 2016-MAY-27
FSP Internal Document Number: SFD16049278
Issued To
FSP GROUP INC
2-3 E 3RD ST PO BOX 35-25, N E P Z
KAOHSIUNG, 811 TAIWAN
Product Information
This is to certify that representative samples of the product were tested according to the current UL requirements.
Product Type: COMPONENT - POWER SUPPLIES, MEDICAL AND DENTAL
Safety Category: UL/cUL Medical
Model/Type: Adapter, PMP105z-xyyyy; z=F or SF (F for C18, SF for C8); x=12, 12-1, 13, 13-1, 13-3, 14, 15, 16, 17 or 18; y=blank, A-Z, 0-9 or hyphen
Specific Models Listed: PMP105F-12, PMP105F-12-1, PMP105F-13, PMP105F-13-1, PMP105F-13-3, PMP105F-14, PMP105F-15, PMP105F-16, PMP105F-17, PMP105F-18, PMP105SF-12, PMP105SF-12-1, PMP105SF-13, PMP105SF-13-1, PMP105SF-13-3, PMP105SF-14, PMP105SF-15, PMP105SF-16, PMP105SF-17, PMP105SF-18
Trade Mark: PROTEK POWER
Safety Standards
Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.
Standard(s) for Safety:
- ANSI/AAMI ES60601-1
- CAN/CSA-C22.2 No. 60601-1:14, Medical Electrical Equipment - Part 1: General Requirements for Basic Safety and Essential Performance
Additional Information
See the UL Online Certifications Directory at www.ul.com/database for additional information.
UL Recognition Details
Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service.
The UL Recognized Component Mark generally consists of the manufacturer's identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL's Component Recognition Program, UL's Recognized Component Mark may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions.
Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC.
Look for the UL Certification Mark on the product.
Signatory
Bruce Mahrenholz, Director North American Certification Program
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/.
