Yealink AX83H Wi-Fi IP Phone

Product Overview

The Yealink AX83H is a Wi-Fi IP Phone designed for efficient communication.

Key Features and Components:

• 1 Receiver: For audio communication.
• 2 Power LED Indicator: Shows the power status of the device.
• 3 Proximity sensor: Detects when the phone is near the face.
• 4 Phone Screen: Displays information and user interface.
• 5 3.5mm audio port: For connecting external audio devices.
• 6 Soft Keys: Programmable keys located below the screen.
• 7 Speakerphone Key: Activates the speakerphone function.
• 8 Message Key: Accesses voicemail or message waiting indicators.
• 9 OK Key: Confirms selections or actions.
• 10 Navigation Keys: Used for moving through menus and options.
• 11 Off-hook Key: Initiates or answers a call.
• 12 On-hook Key/Power Key: Ends a call or powers the device on/off.
• 13 Keypad: For dialing numbers and inputting characters.
• 14 TRAN Key: Typically used for call transfer.
• 15 Mute Key: Mutes or unmutes the microphone.
• 16 Microphone: Captures audio for calls.

Package Contents

The package for the Yealink AX83H includes:

• AX83H Handset
• Charging Cradle
• Power Adapter (5V/1.2A)
• Battery Cover
• Rechargeable Battery
• Belt Clip
• Quick Start Guide

? We recommend using accessories provided or approved by Yealink. Use of unapproved third-party accessories may result in reduced performance.

Assembling AX83H

1. Insert the battery into the handset.

   Open the battery compartment, insert the rechargeable battery, and close the compartment.

2. Attach the belt clip to the handset.

   Align the belt clip with the designated slot on the back of the handset and secure it.

3. (Optional) Mount the charging cradle to the wall.

   Use screws to attach the charging cradle bracket to the wall, ensuring it is level and secure. The recommended mounting height is approximately 38mm from the top edge.

Charging

There are two primary methods for charging the AX83H:

Option 1: Using the Charging Cradle

Place the AX83H handset into the charging cradle. Connect the power adapter to the cradle and plug it into a power source.

Option 2: Direct Charging via USB-C

Connect the type-C end of the charging cable to the charging port on the bottom of the AX83H. Plug the other end into a power source using the Yealink-supplied power adapter (5V/1.2A).

Important Notes:

• Use only the Yealink-supplied power adapter (5V/1.2A). A third-party power adapter may damage the handset.
• Check the charging status on the top-right corner of the LCD screen.

LED Indicator Instructions

Regulatory Notices

Operating Ambient Temperatures

• Operating temperature: +32 to 104°F (0 to 40°C)
• Relative humidity: 5% to 90%, noncondensing
• Storage temperature: -22 to +160°F (-30 to +70°C)

Warranty

Yealink's product warranty is limited to the unit itself when used normally according to operating instructions. Yealink is not liable for damage or loss resulting from product use, claims from third parties, financial damages, lost profits, or issues arising from the use of third-party accessories or incompatible systems.

Explanation of Symbols

• DC symbol: Indicates DC voltage.
• WEEE Warning symbol: ? (Crossed-out wheeled bin icon). Indicates that Waste Electrical and Electronic Equipment (WEEE) should not be disposed of as unsorted municipal waste. Users must collect WEEE separately.

Restriction of Hazardous Substances Directive (RoHS)

This device complies with the requirements of the EU RoHS Directive. For compliance statements, contact support@yealink.com.

Safety Instructions

Save these instructions. Read them before use.

General Requirements:

• Read safety instructions carefully before installation and use.
• Keep the device dry, clean, and avoid collision during storage, transportation, and operation.
• Do not attempt to dismantle the device. Contact an appointed maintenance center for repairs.
• Refer to relevant laws and statutes, and respect the legal rights of others.

Environmental Requirements:

• Place the device in a well-ventilated area, away from direct sunlight.
• Keep the device dry and free of dust.
• Do not place the device near inflammable or fire-vulnerable objects.
• Keep the device away from heat sources or open flames.

Operating Requirements:

• Do not allow children to operate the device without guidance.
• Prevent children from playing with the device or accessories to avoid accidental swallowing.
• Use only accessories provided or authorized by the manufacturer.
• Ensure the power supply meets the device's input voltage requirements and use a surge protection power socket.
• Ensure hands are dry before plugging or unplugging cables.
• Do not spill liquids on the product or use near water.
• During thunderstorms, disconnect the device from the power supply to avoid lightning strikes.
• If the device is left unused for an extended period, disconnect it from the power supply.
• If smoke, abnormal noise, or smell is detected, immediately disconnect the device from the power supply and contact a maintenance center.
• Do not insert foreign objects into equipment slots.
• Connect the grounding cable first before connecting other cables, and do not disconnect it until all other cables are disconnected.

Battery Requirements:

• Do not immerse the battery in water.
• Do not expose the battery to open flames or extreme heat.
• Power off the handset before removing the battery.
• Do not use the battery for devices other than this handset.
• Do not open or mutilate the battery; released electrolyte is corrosive.
• Use only Yealink-approved rechargeable battery packs.
• Dispose of defective or exhausted batteries properly; do not treat as municipal waste. Return them to the supplier or a designated collection facility.

Cleaning Requirements:

• Disconnect the device from the power supply before cleaning.
• Use a soft, dry, anti-static cloth for cleaning.
• Keep the power plug clean and dry.

Troubleshooting:

Unit cannot supply power / Bad connection:

• Clean the plug with a dry cloth.
• Connect to another wall outlet.

Usage environment out of operating temperature range:

• Use the device within the specified operating temperature range.

Cable connection issues:

• Ensure the cable between the unit and the Yealink device is connected correctly.
• Verify you are using the correct Yealink device and power supply.
• Clean any dust from the port.

Contact your dealer or authorized service facility for further assistance.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received. Unauthorized modifications may void the user's authority to operate the equipment. This equipment has been tested and found to comply with Class B digital device limits, designed to provide reasonable protection against harmful interference in residential installations. If interference occurs, try correcting it by reorienting/relocating the antenna, increasing separation between equipment and receiver, or connecting to a different circuit. Consult the dealer or a technician for help.

ISED WARNING

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. The device for operation in the 5150-5250 MHz band is for indoor use only to reduce potential interference to co-channel mobile satellite systems. This Class B digital apparatus complies with Canadian ICES-003.

Radiation Exposure Statement

The device has been tested and complies with FCC/ISED SAR limits. For body-worn operation, use an accessory designated for this product or one without metal, positioning the handset at least 5mm from the body to meet RF exposure guidelines.

Contact Information

YEALINK NETWORK TECHNOLOGY CO.,LTD.
No.666 Hu'an Rd, Huli District Xiamen City, Fujian, P.R.C

YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands

YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA

Made in China

Web: www.yealink.com

Copyright © 2024 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. All rights reserved.