IDEC EU Declaration of Conformity

Document No.: 235DOC-0092

Doc No.: D2B047 D5B058

Identification of the Product

Three Position Enabling Switch

Manufacturer Information

Name and address of Manufacturer:
IDEC CORPORATION
2-6-64 Nishimiyahara, Yodogawa-Ku,
Osaka 532-0004 Japan

Name and address of the authorized representative:
APEM SAS
55, Avenue Edouard Herriot BP1, 82303
Caussade Cedex, France

This declaration of conformity is issued under the sole responsibility of the manufacturer.

Object of the declaration

Series Name: HE1B, HE2B, HE3B, HE5B and HE9Z Series

Model No.: Details are as per attached sheet

EU Harmonization Legislation

The object of the declaration described above is in conformity with the relevant EU harmonization legislation:

2014/35/EU (Low Voltage Directive)
2011/65/EU and (EU)2015/863 (Restriction of the use of certain hazardous substances (RoHS) Directive)

Applied Union Harmonized Legislation and Standards

Applied Union harmonized legislation and references to the relevant harmonization standards used or references the other technical specifications in relation to which conformity is declared:

EN 60947-5-8:2006
EN 60529:1991 +A2:2013 (for Grip-Switch Housing)
EN IEC 63000:2018

Notified Body

Where applicable, the notified body: [Not specified]

Additional Information

Signed for and on behalf of the above named manufacturer:

Place and date of issue: Japan, 20 April, 2016 (Revised: 18 November, 2021)

Name, function: Masaki Tsuri, Executive Officer, Quality Assurance Center

Signature: [Signature of Masaki Tsuri]

Product Series Details

HE1B Series

Model Example: HE1B - M (1) (2) (3) (4) N (5) ******

(1) Series: HE1B
(2) Action: M: Momentary
(3) Number of contact of 3-position switch: 1: 1 contact
(4) Mounting style: Blank: Side mounting, N: Top mounting
(5) Manufacturer Control Number: Additional letters and/or numbers (may be including hyphens)

HE2B Series

Model Example: HE2B - M 2 (1) (2) (3) 0 (4) 0 (5) Π (6) P (7) Y (8) ****** (9)

(1) Series: HE2B
(2) Action: M: Momentary
(3) Number of contact of 3-position switch: 2: 2 contacts
(4) Release monitor switch: 0: None, 1: 1 contact, 2: 2 contacts
(5) Push monitor switch: 0: None, 1: 1 contact, 2: 2 contacts
(6) Operating force (position 2 to 3): Blank: Standard type, H: High operating force
(7) Flange and rubber boot: Blank: Circumference flange without rubber boot, P: Circumference flange with rubber boot, F: Both-end flange without rubber boot
(8) Material and color of rubber boot: Blank: Without rubber boot, Y: Silicon rubber / yellow, B: Silicon rubber / black, Y1: NBR/PVC polyblend / yellow, B1: NBR/PVC polyblend / black, N1: NBR/PVC polyblend / gray
(9) Manufacturer Control Number: Additional letters and/or numbers (may be including hyphens)

HE3B and HE5B Series

Model Example: HE5B - M 2 (1) (2) (3) H (4) P (5) Y (6) ****** (7)

(1) Series: HE3B, HE5B
(2) Action: M: Momentary
(3) Number of contact of 3-position switch: 2: 2 contacts
(4) Operating force (position 2 to 3): Blank: Standard type, H: High operating force
(5) Rubber boot: Blank: Without rubber boot, P: With rubber boot
(6) Material and color of rubber boot: Blank: Without rubber boot, Y: Silicon rubber / yellow, B: Silicon rubber / black, Y1: NBR/PVC polyblend / yellow, B1: NBR/PVC polyblend / black, N1: NBR/PVC polyblend / gray
(7) Manufacturer Control Number: Additional letters and/or numbers (may be including hyphens)

Accessory

Grip-Switch Housing for use with HE5B, Type HE9Z-GSH51 and HE9Z-GSH52

	IDEC Enabling Switches: HE2B, HE3B, HE5B, HE6B, HE2G, HE1G-L Series - Product Catalog & Specifications Comprehensive guide to IDEC's HE series 3-position enabling switches, including HE2B, HE3B, HE5B, HE6B, HE2G, and HE1G-L models. Features detailed specifications, safety precautions, operating instructions, and wiring diagrams for industrial applications.
	IDEC YW Series Switches & Pilot Lights - Comprehensive Product Catalog Explore the IDEC YW Series of Ø22 and Ø30 switches and pilot lights, including emergency stop switches, pushbuttons, selector switches, key selector switches, and pilot lights. View specifications, part numbers, dimensions, and accessories.
	IDEC HG2G Series Operator Interface Instruction Sheet This instruction sheet provides detailed information on the IDEC HG2G Series Operator Interface, covering safety precautions, package contents, product specifications, installation, wiring, operation notes, interface details, battery replacement, contrast and touch panel adjustment, and maintenance procedures.
	Nippon Kaiji Kyokai Type Approval Certificate for IDEC Programmable Controllers Type Approval Certificate issued by Nippon Kaiji Kyokai for IDEC CORPORATION's Programmable Controllers, including models FC6A and FC6B series, manufactured by IDEC IZUMI TAIWAN CORPORATION and SHINKO TECHNOS CO., LTD.
	IDEC Report 2025: Integrated Report Highlights Growth and Sustainability IDEC Corporation announces the release of its Integrated Report 2025, detailing its 3-year medium-term management plan, sustainable growth strategies, value enhancement initiatives, and ESG efforts for stakeholders.
	IDEC XA/XW Series: Compact ISO13850 Compliant Emergency Stop Switches Explore the IDEC XA/XW series of compact, short-body emergency stop switches, compliant with ISO13850. Featuring illuminated and non-illuminated options, reverse energy structure, and robust design for industrial safety applications.
	IDEC Corporation: Notice of Treasury Share Disposal Completion for Performance-Linked Stock Compensation Plan IDEC Corporation announces the completion of payment for the disposal of treasury shares under its performance-linked stock compensation plan, detailing share numbers, price, and recipients.
	IDEC FC6A and FC6B Series Programmable Controllers Type Approval Certificate Type Approval Certificate for IDEC Corporation's FC6A and FC6B Series Programmable Controllers, detailing their suitability for marine and offshore applications.