MIRO A1 Smartphone

Product Safety Information

Thank you for choosing MIRO product. Please follow the instructions when start using this product.

• ⚠ Do not use while re-charging.
• ⚠ Do not use hand-held while driving.
• ⚠ This device may produce a bright or flash light.
• ⚠ For body-worn operation, maintain a separation of 5 mm.
• ⚠ Do not dispose of the phone in a fire.
• ⚠ Small parts may cause a choking hazard.
• ⚠ Avoid contact with magnetic media.
• ⚠ This device may produce a loud sound. To prevent possible hearing damage, do not listen at high volume levels for long periods.
• ⚠ Avoid extreme temperatures.
• ⚠ Keep away from pacemakers and other personal medical devices.
• ⚠ Avoid any contact with liquid. Keep it dry.
• ⚠ Switch off when instructed in hospitals and medical facilities.
• ⚠ Do not attempt to disassemble your phone.
• ⚠ Switch off when instructed in aircrafts and airports.
• ⚠ Do not rely on this device for emergency communications.
• ⚠ Switch off in explosive environments.
• ⚠ Only use approved accessories.

What's in the Box

The phone packaging box should contain the following items and accessories:

• Phone
• Charger
• USB Type-C cable
• Protective film (applied)
• SIM card tool
• Quick Start Guide

Notices for the Use of Your Phone

Your phone should be treated with care. The following suggestions can help you extend the life of your mobile phone.

1. Place the mobile phone and its parts and components out of reach of young children.
2. Keep the phone dry. Rain, humidity, and all types of liquids containing minerals will corrode electronic circuits.
3. Do not touch the phone with wet hands when charging; it will cause an electric shock or damage the phone.
4. Avoid placing the device in high-temperature environments. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
5. Avoid placing the device in a low-temperature environment. When the temperature rises, the phone will produce water vapor that may damage electronic circuits.
6. Avoid placing the phone in dusty, dirty places, otherwise parts may be damaged.
7. Avoid placing the phone near a lit cigarette, open flame, or any heat source.
8. Do not drop, knock, or shake the phone. Rough handling can damage internal circuit boards.
9. Do not paint the phone. The paint may block headphones, microphones, or other removable parts and cause them not to work.
10. Use a clean, soft, dry cloth to clean the camera and light sensor lenses. Prohibit the use of harmful chemicals and cleaning agents to clean the phone.
11. Pacemaker manufacturers recommend that a minimum separation of 5 mm be maintained between a mobile phone and a pacemaker to avoid potential interference. When the device is used in the USA, the separation distance can be maintained at 10 mm between the user's body and handset. To achieve this, use the phone on the opposite ear to your pacemaker and do not carry it in a breast pocket.
12. Please consult your doctor and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device.
13. Turn off your mobile phone or wireless devices when in a blasting area or in areas posted "turn off two-way radios" or "electronic devices" to avoid interfering with blasting operations.
14. There is a risk of explosion if the battery is replaced with an incorrect type. Dispose of used batteries according to the instructions.

Getting to Know Your Phone

Diagram Description: The phone features a touchscreen interface. Key components include the Camera, Earpiece/Speaker, Volume Keys, Power Key, Headset Jack, Charging USB Port, and Microphone.

Power Key

Press and hold to power on/off, or restart the phone. Press to wake up or turn off the display.

Home Key

Touch to return to the home screen. Touch and hold to open Google Assistant.

Menu Key

Touch to see recently used applications.

Back Key

Touch to go back to the previous screen.

Volume Keys

Press or hold to turn the volume up or down.

Before Getting Started

Diagram Description: Illustrations guide the user through installing SIM cards, a microSD card (not included), the battery, and closing the back cover. Steps include removing the back cover, inserting SIM cards, inserting a microSD card, installing the battery, and closing the back cover.

Note: Some applications may require a microSD card to function normally or may store certain data on it. It is recommended to keep a microSD card installed and not remove or replace it randomly.

Basic Settings

Your service provider may have defaulted some device settings, which you may not be able to change.

Display

• Brightness: Adjust the screen brightness level.
• Lock display: Customize what is shown on the lock screen.
• Screen timeout: Adjust the time allowed before the screen goes to sleep after inactivity.
• Appearance: Enable or disable dark theme. Set the system font size. Set the display size of the screen.
• Other display controls: Enable or disable auto-rotated screen. Choose the screen saver and when it starts.

System

• Languages and input: Set up all supported languages for the phone. Configure on-screen or physical keyboards.
• Date and time: Set time automatically using network-provided date and time. Choose a time zone based on network or location. Select local default or 24-hour time format.

About Phone

Here you can check basic information: device name, phone numbers, legal information, and device details including SIM status, memory/storage information, operating system, IP address, uptime, build number, etc.

Technical Specifications

• Network: 2G: 850/900/1800/1900; 3G: B2/4/5; 4G: B2/4/5/7/12/13/17/25/28AB/41/66/71
• Display: 6.0"
• Memory: 2GB RAM + 32GB ROM
• Camera: 5MP + 2MP
• Features: FM/MP3/MP4/GPS/G-sensor
• Battery Capacity: 3000mAh Li-ion

Note: The actual available storage capacity may be less than the stated internal memory due to the preloaded operating system and/or other pre-installed applications. Check the space actually available on your device.

SAR Information Statement

The SAR limit for the USA (FCC) is 1.6W/kg averaged over one gram of tissue. This device type (smartphone, FCC ID: 2AQRM-A1) has been tested against this SAR limit. The highest SAR value tested for this mobile phone is 0.72W/kg for the head and 1.07W/kg at 10 mm from the body.

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Use the smartphone in an environment with a temperature between -10°C to +45°C (+14°F to +113°F).

Use earphones carefully. Excessive sound pressure from earphones and headphones can cause hearing loss.

The product shall only be connected to a USB interface of version USB 2.0.

Manufacturer and Auxiliary Equipment

Manufacturer: Foxx Development Inc.

Address: 3480 Preston Ridge Road, Suite 500, Alpharetta, GA 30005

Information for Auxiliary Equipment

WEEE Recycling

This product should not be treated as household waste. Instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Network Frequencies

GSM Operation Frequency

• GSM 850: TX: 824-849MHz; RX: 869-894MHz
• GSM 900: TX: 890-915MHz; RX: 935-960MHz
• DCS 1800: TX: 1710-1785 MHz; RX: 1805-1880MHz
• PCS 1900: TX: 1850-1910MHz; RX: 1930-1990MHz

WCDMA Operation Frequency

• Band 2: TX: 1850-1910MHz; RX: 1930-1990MHz
• Band 4: TX: 1710-1755MHz; RX: 2110-2155MHz
• Band 5: TX: 824-849MHz; RX: 869-894MHz

LTE Operation Frequency

• Band 2: TX: 1850-1910MHz; RX: 1930-1990MHz
• Band 4: TX: 1710-1755MHz; RX: 2110-2155MHz
• Band 5: TX: 824-849MHz; RX: 869-894MHz
• Band 7: TX: 2500-2570MHz; RX: 2620-2690MHz
• Band 12: TX: 698-716MHz; RX: 728-746MHz
• Band 13: TX: 777-787MHz; RX: 746-756MHz
• Band 17: TX: 704-716MHz; RX: 734-746MHz
• Band 25: TX: 1850-1915MHz; RX: 1930-1995MHz
• Band 28: TX: 703-748MHz; RX: 758-803MHz
• Band 41: TDD: 2496-2690MHz
• Band 66: TX: 1710-1780MHz; RX: 2110-2200MHz
• Band 71: TX: 663-698MHz; RX: 617-652MHz

FM Operation Frequency

87.5MHz - 108MHz

GPS/GLONASS Operation Frequency

L1: 1559MHz~1610MHz; R1: 1559MHz~1610MHz

FCC Warning

15.19 Labeling Requirements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

15.21 Information to User

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

15.105 Information to the User

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Absorption Rate (SAR) Information

This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the back of the device kept 10 mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an appropriate separation distance between the user's body and the back of the device. The use of belt clips, holsters, and similar accessories should not contain metallic components in their assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.