MIRO T1 TWS Bluetooth Headphones
User Manual
Packing List
- Headphones
- Headphone case
- User manual
- Charging cable
How to Operate
Take the headphones out from the charging case. The headphones will turn on automatically.
Pairing: Turn on the Bluetooth of the mobile phone and find the name "MIRO TI". Click connect to pair the headphones. The headphones will be automatically connected when you are using it next time.
ANC: While in standby mode, long press 2s left or right headphone will turn on/off ANC mode.
Siri: Three tap right headphone to enter Siri; and three tap left headphone to quit it.
Low battery mode: When the battery is less than 20%, you'll hear alerts every 5 minutes.
Play/pause: Tap left or right headphone.
Previous: Double tap left headphone.
Next: Double tap right headphone.
Answer Call: When a call comes, double tap left or right headphone to answer the call.
Reject Call: When a call comes, long press 2s left or right headphone to reject the call.
Specifications
| Feature | Details |
|---|---|
| Model name | T1 |
| Bluetooth version | 5.3+EDR |
| Operating frequency | 2402MHz-2480MHz |
| Working distance | ≤10M |
| Charging voltage | 5V/400mA |
| ANC mode | 6 Mics for ANC |
| Standby time | 260 Hours |
| Speaker impedance | 32Ω±15% |
FAQ
What should I do if the Bluetooth pairing is unsuccessful?
Occasionally there will be unsuccessful pairings. When it occurs, please ignore the connected Bluetooth device name in Bluetooth settings and turn off the device Bluetooth. Put the earphones in the headphone case for more than 10 seconds, then turn on the device Bluetooth, take the earphones out of the headphone case and wait for 5-10 seconds for the successful pairing.
What should I do if there is no sound from the earphones?
First: Please check if the headphones are paired to the correct device. Second: Check the volume of the phone after connecting the headset to the phone. The maximum volume of Android phones is subject to the default volume of the phone. Third: Make sure the headphones are properly charged. Make sure the sound is playing on the device (and not paused).
What should I do if there is occasional freeze/delay?
Since the headset is connected via Bluetooth, occasionally, there will be a freeze or disconnection. Please reconnect it when it occurs. When running large software, browsing some websites, or running software that occupies a large amount of memory, the Bluetooth loading time will be increased. This is not a quality problem of the headphones.
Precautions
- Do not treat this product violently or squeeze it with heavy objects. Stay away from high temperature and high humidity environments.
- Keep away from Wi-Fi, routers, and other high-frequency transmitting equipment. These devices will generate radio interferences and cause the sound to be stuck or disconnected.
- Please use this product in an effective distance (≤10m) and there should be no physical obstruction (such as walls, etc.) between the Bluetooth device and the headphones.
- If the LED on the headphone case does not turn on when opening or closing the headphone case, it is showing the power out status of the headphone case. In this situation, the automatic power on doesn't work. You need to touch the headphones manually to turn on the power.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Manufacturer Information
Manufacturer: Foxx Development Inc.
Brand: MIRO
Phone: (+1) 855-585-3699
Address: 3480 Preston Ridge Rd Suite 500, Alpharetta, GA 30005
