POCO X4 Pro 5G Quick Start Guide

Getting Started

Thank you for choosing the POCO X4 Pro 5G.

To turn on the device, long-press the power button. Follow the on-screen instructions to configure your device.

For more information, visit the official website: www.mi.com/global/service/userguide

MIUI (for POCO)

The POCO X4 Pro 5G comes pre-installed with MIUI (for POCO), a customized Android-based OS. It offers frequent updates and user-friendly features based on feedback from over 200 million active users worldwide.

For more information, please visit en.miui.com.

SIM Card Tray

The device supports Dual SIM cards with no carrier restrictions and dual 5G connectivity.

It features Dual Nano-SIM card slots, allowing either card to be set as the primary card.

The device supports Dual SIM 5G/4G/3G/2G and Dual SIM VoLTE.

Note 1: 5G connection availability depends on country, carrier, and user environment.

Note 2: VoLTE availability depends on the carrier's network and related service deployment.

Please do not insert non-standard SIM cards into the SIM card slot, as they may cause damage.

WARNING: Do not disassemble this device.

Device Overview

A line drawing of the POCO X4 Pro 5G smartphone shows the front display with the time "02 48" and date "SAT. 16 AUG.". On the right side, the "Volume Buttons" and "Power Button" are indicated. The "USB Type-C Port" is shown at the bottom.

Important Safety Information

WEEE Disposal

Special precautions must be taken for the safe disposal of this product. The WEEE (Waste Electrical and Electronic Equipment) marking indicates that this product may not be discarded with other household waste in the EU.

To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly. Use return and collection systems or contact the retailer where the device was originally purchased for safe recycling.

View the Environmental Declaration at: www.mi.com/en/about/environment

General Precautions

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Additional safety information and precautions can be accessed at: www.mi.com/en/certification

Usage Guidelines

• Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or other risks.
• Use only authorized accessories compatible with your device.
• The device's operating temperature range is 0°C to 40°C. Using it outside this range may damage the device.
• If your device has a built-in battery, do not attempt to replace it yourself to avoid damage.
• Charge only with the included or authorized cable and power adapter. Using others may cause fire, electric shock, or damage.
• After charging, disconnect the adapter from the device and the power outlet. Do not charge for more than 12 hours.
• The battery must be recycled or disposed of separately from household waste. Mishandling may cause fire or explosion. Dispose of or recycle the device, battery, and accessories according to local regulations.
• Do not disassemble, hit, crush, or burn the battery. Stop using immediately if deformed or damaged.
• Do not short circuit the battery, as this may cause overheating, burns, or injury.
• Do not place the battery in high-temperature environments; overheating may cause explosion.
• User shall not remove or alter the battery. Removal or repair must be done by an authorized repair center.
• Keep your device dry.

Safety Precautions

• Do not attempt to repair the device yourself. Contact Mi customer support or an authorized repair center for issues.
• Connect other devices according to their manuals. Do not connect incompatible devices.
• For AC/DC adapters, the socket-outlet must be installed near the equipment and easily accessible.
• Observe all applicable laws and rules restricting mobile phone use in specific situations and environments.
• Do not use your phone at petrol stations, in explosive atmospheres, or potentially explosive environments (e.g., fueling areas, below decks on boats, fuel/chemical storage). Obey signs to turn off wireless devices in such areas.
• Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Comply with all hospital rules. If you have a medical device, consult your doctor and the manufacturer regarding potential interference. Maintain a minimum distance of 15 cm between your phone and a pacemaker, using the ear opposite the pacemaker and not carrying it in a breast pocket. Avoid using near hearing aids, cochlear implants, or similar devices.
• Observe aircraft safety regulations and turn off your phone on board aircraft when required.
• When driving, use your phone in accordance with traffic laws and regulations.
• To avoid being struck by lightning, do not use your phone outdoors during thunderstorms.
• Do not make calls while charging.
• Do not use your phone in places with high humidity (e.g., bathrooms), as this may result in electric shock, injury, fire, or charger damage.

Regulatory Information

Security Statement

Please update your phone's operating system using the built-in software update feature or visit an authorized service outlet. Updating through other means may damage the device or result in data loss, security issues, and other risks.

EU Regulations

RED Declaration of Conformity

Xiaomi Communications Co., Ltd. declares that this GSM / GPRS / EDGE / UMTS / LTE / 5G NR Digital Mobile Phone with Bluetooth and Wi-Fi (Model: 2201116PG) complies with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at: www.mi.com/en/certification

RF Exposure Information (SAR)

This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W/kg) as specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU).

During SAR testing, the device transmitted at its highest certified power level in all tested frequency bands and was placed in positions simulating RF exposure against the head (no separation) and near the body (5 mm separation).

SAR compliance for body operation is based on a 5 mm separation distance. Carry the device at least 5 mm away from the body. When attaching near the body, use a belt clip or holster without metallic components, maintaining at least 5 mm separation. RF exposure compliance with body-worn accessories containing metal has not been tested or certified and should be avoided.

Certification Information (Highest SAR)

This radio communication equipment has a specific absorption rate (SAR) of 0.596 W/kg, complying with the Safety Standard for the Use of Radio communication Equipment on Human Health announced by the National Telecommunications Commission.

Legal Information

This device may be operated in all EU member states. Observe national and local regulations.

Restrictions in the 5150 to 5350 MHz frequency range: This device is restricted to indoor use only in the following countries: AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK(NI), IS, LI, NO, CH, TR.

Restrictions in the 2.4 GHz band: Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards.

FCC Regulations

This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used per instructions. No guarantee of no interference in a particular installation.

If interference occurs, users are encouraged to try correcting it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to an outlet on a different circuit from the receiver.
• Consulting the dealer or an experienced radio/TV technician.

RF Exposure Information (SAR)

This device meets government requirements for radio wave exposure. It is designed and manufactured not to exceed emission limits for RF energy. The exposure standard uses Specific Absorption Rate (SAR).

The FCC SAR limit is 1.6 W/Kg. For body-worn operation, this device has been tested and meets FCC RF exposure guidelines for use with a non-metal accessory, positioning the device at least 1.0 cm from the body. RF exposure compliance with body-worn accessories containing metal has not been tested or certified and should be avoided. Any accessory used for body-worn operation must keep the device at least 1.0 cm away from the body.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with Class B FCC limits.

E-label

This device has an electronic label for certification information. Access it via Settings > About phone > Certification, or open Settings and search for "Certification".

Model: 2201116PG

2201 indicates this product will be launched after 202201.

NBTC

The telecommunication equipment and this device conform to the requirements of NBTC.

Frequency Bands and Power

This mobile phone offers the following frequency bands in EU areas only and maximum radio-frequency power:

• GSM 900: 35.5 dBm
• GSM 1800: 32.5 dBm
• WCDMA band 1/8: 25.7 dBm
• LTE band 1/3/7/8/20/28/38/40/41: 25.7 dBm
• 5G NR band n1/n3/n7/n8/n20/n28/n38/n40: 26 dBm
• 5G NR band n41/n77/n78: 29 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz band: 20 dBm
• Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to 5725 MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm
• NFC: 13.56 MHz < 42 dBuA/m at 10m

Disclaimer

This user guide is published by Xiaomi or its local affiliated company. Improvements and changes necessitated by errors, inaccuracies, or program/equipment enhancements may be made by Xiaomi at any time without notice. Such changes will be incorporated into new online editions (see www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer postal address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Brand: POCO

Model: 2201116PG

© Xiaomi Inc. All rights reserved.