Hama Strong Universal Smartphone Holder for Bikes

Introduction

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

1. Explanation of Warning Symbols and Notes

[Warning Symbol] This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

[Note Symbol] This symbol is used to indicate additional information or important notes.

2. Package Contents

• 1x Universal Smartphone Bike Holder
• Operating Instructions

3. Safety Instructions

• Use the product only for its intended purpose.
• Protect the product from dirt, moisture, and overheating and use it in dry environments only.
• When using this product, observe the applicable local traffic laws and regulations.
• Do not drop the product and do not expose it to any major shocks.
• Keep the packaging material out of the reach of children due to the risk of suffocation.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.

Warning - Risk of Injury

• While driving a car or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.
• The product is not intended for mounting on carbon components (e.g. handlebars). Carbon components can be damaged by the clamp, break, and subsequently cause serious accidents and injuries.

4. Installation

[Note Symbol] Never apply force when using the product or during installation.

Please note that smartphones and similar devices are attached without securing with the silicone mesh at the user's own risk. Only by securing them with the silicone mesh is a secure grip of the smartphone and similar devices guaranteed.

4.1 Mounting the Clamp

Turn the setting screw to secure clockwise until the clamp sits securely on the handlebars without sliding around. (A)

4.2 Inserting / Removing the Smartphone

• Press the unlock button on the smartphone holder to open the holding jaws. (B)
• Insert the device and fix it in place by pressing the holding jaws together. (C)
• Hang the elastic silicone mesh over all four corners of the smartphone to secure your device in place. (D)

[Note Symbol] Always check that the smartphone holder is secure.

5. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.