DJI Mavic 2 Pro/Zoom Release Notes

2023.11.23

Firmware Version: V01.00.0797

Remote Controller Firmware Version: V01.00.0770

DJI GO 4 App iOS Version: V4.3.60

DJI GO 4 App Android Version: V4.3.60

What's New?

• Added support for U.S. Remote ID requirements.

Notes:

• After updating to firmware V01.00.0797, please upgrade DJI GO 4 App to V4.3.60, otherwise the aircraft will not be usable.
• Users of the GS Pro App should not upgrade this firmware, otherwise the aircraft will not be usable.
• After the upgrade is complete, restart the aircraft and remote controller.
• After the firmware upgrade, flight control parameters such as height and distance limits, and return-to-home height may be reset. Please check and set them in the DJI GO 4 App.
• If the upgrade fails, please restart the aircraft and DJI GO 4 App or DJI Assistant 2 for Mavic to re-upgrade.

2021.04.22

Firmware Version: V01.00.0770

Remote Controller Firmware Version: V01.00.0770

DJI GO 4 App iOS Version: V4.3.42

DJI GO 4 App Android Version: V4.3.42

What's New?

• Fixed an issue where the battery might fail to charge at low power levels.

Notes:

• After the upgrade is complete, restart the aircraft and remote controller.
• After the firmware upgrade, flight control parameters such as height and distance limits, and return-to-home height may be reset. Please check and set them in the DJI GO 4 App.
• If the upgrade fails, please restart the aircraft and DJI GO 4 App or DJI Assistant 2 for Mavic to re-upgrade.

2020.11.12

Firmware Version: V01.00.0720

Remote Controller Firmware Version: V01.00.0640

DJI GO 4 App iOS Version: V4.3.38

DJI GO 4 App Android Version: V4.3.38

What's New?

• Optimized the auto-return-to-home experience.
• Optimized flight prompts under GPS interference.
• Fixed an issue where aircraft altitude display was abnormal in rare cases at high altitudes.

Notes:

• After the upgrade is complete, restart the aircraft and remote controller.
• After the firmware upgrade, flight control parameters such as height and distance limits, and return-to-home height may be reset. Please check and set them in the DJI GO 4 App.
• If the upgrade fails, please restart the aircraft and DJI GO 4 App or DJI Assistant 2 for Mavic to re-upgrade.

2020.07.07

Firmware Version: V01.00.0670

DJI GO 4 App iOS Version: V4.3.37

DJI GO 4 App Android Version: V4.3.36

What's New?

• Improved battery life of the remote controller in low-temperature environments.
• Changed the default number of days for battery self-discharge to 2 days.
• Fixed an issue where the gimbal might not be level after self-check in rare cases, controllable via DJI GO 4 App auto-calibration.
• Fixed an issue where obstacle avoidance switch was ineffective when using MSDK.
• Increased the maximum effective signal range of the remote controller to 10 km (FCC) and 6 km (CE/MIC/SRRC).

Notes:

• After the upgrade is complete, restart the aircraft and remote controller.
• After the firmware upgrade, flight control parameters such as height and distance limits, and return-to-home height may be reset. Please check and set them in the DJI GO 4 App.
• If the upgrade fails, please restart the aircraft and DJI GO 4 App or DJI Assistant 2 for Mavic to re-upgrade.

2019.09.16

Firmware Version: V01.00.0510

DJI GO 4 App iOS Version: V4.3.24

DJI GO 4 App Android Version: V4.3.24

What's New?

• Added battery installation detection function; the aircraft will not take off if the battery is not installed (requires DJI GO 4 V4.3.24 or later).
• Added altitude information display for video subtitles.
• Optimized battery self-discharge function, added self-discharge day setting (default 5 days, requires DJI GO 4 V4.3.24 or later).
• Optimized obstacle detection function for improved accuracy.
• Improved accuracy of altitude information in photo Exif data.
• Optimized waypoint flight.

Notes:

• After the upgrade is complete, restart the aircraft and remote controller.
• After the firmware upgrade, flight control parameters such as height and distance limits, and return-to-home height may be reset. Please check and set them in the DJI GO 4 App.
• If the upgrade fails, please restart the aircraft and DJI GO 4 App or DJI Assistant 2 for Mavic to re-upgrade.

2019.04.17

Firmware Version: V01.00.04.00

DJI GO 4 App iOS Version: V4.3.16

DJI GO 4 App Android Version: V4.3.16

What's New?

• Added dual remote controller mode (requires DJI GO 4 V4.3.16 or later).
• Fixed an issue with incorrect GPS information in photos in some scenarios.
• Fixed an issue where the gimbal behavior was abnormal in rare cases during the "Takeoff" mode of QuickShots.

Notes:

• After the upgrade is complete, restart the aircraft and remote controller.
• After the firmware upgrade, flight control parameters such as height and distance limits, and return-to-home height may be reset. Please check and set them in the DJI GO 4 App.
• If the upgrade fails, please restart the aircraft and DJI GO 4 App or DJI Assistant 2 for Mavic to re-upgrade.

2019.01.24

Firmware Version: V01.00.03.00

DJI GO 4 App iOS Version: V4.3.12

DJI GO 4 App Android Version: V4.3.12

What's New?

• Added waypoint flight function (requires DJI GO 4 V4.3.12 or later).
• Added left and right obstacle avoidance perception for delayed photography mode (refer to the user manual for conditions for left and right vision system activation).
• Optimized the altitude accuracy for trajectory delayed photography (the takeoff altitude and saved trajectory takeoff altitude must be the same for each trajectory delayed photography task).
• Fixed an issue where remote controller battery life was too short on some phone models.
• Fixed an issue where spherical panorama photos were not recognized on Weibo, QQ Zone, and Facebook.
• Fixed an issue where the intelligent flight battery could not be charged in the range of 5℃-10℃.

Notes:

• After the upgrade is complete, restart the aircraft and remote controller.
• After the firmware upgrade, flight control parameters such as height and distance limits, and return-to-home height may be reset. Please check and set them in the DJI GO 4 App.
• If the upgrade fails, please restart the aircraft and DJI GO 4 App or DJI Assistant 2 for Mavic to re-upgrade.

2018.11.22

Firmware Version: V01.00.02.00

DJI GO 4 App iOS Version: V4.3.5

DJI GO 4 App Android Version: V4.3.4

What's New?

• Increased the maximum shutter speed limit for ActiveTrack and Point of Interest modes to 2s (requires DJI GO 4 V4.3.4 or later).
• Added Waypoint Mission Library function (requires DJI GO 4 V4.3.4 or later).
• Added Precision Landing function.
• Added left and right obstacle avoidance perception for Point of Interest mode (refer to the user manual for conditions for left and right vision system activation).
• Added voice prompt for target loss in Intelligent Flight Modes (iOS requires DJI GO 4 V4.3.4 or later; Android users please check for subsequent version updates).
• Added OSD (On-Screen Display) information display for mobile timelapse and panorama modes (requires DJI GO 4 V4.3.4 or later).
• Optimized the DJI GO 4 interface visual system status icon display (requires DJI GO 4 V4.3.4 or later).

Notes:

• After the upgrade is complete, restart the aircraft and remote controller.
• After the firmware upgrade, flight control parameters such as height and distance limits, and return-to-home height may be reset. Please check and set them in the DJI GO 4 App.
• If the upgrade fails, please restart the aircraft and DJI GO 4 App or DJI Assistant 2 for Mavic to re-upgrade.

2018.10.11

Firmware Version: V01.00.01.00

DJI GO 4 App iOS Version: V4.3.3

DJI GO 4 App Android Version: V4.3.2

What's New?

• Added speed adjustment function, frame selection function, and dynamic time increase for mobile timelapse (requires DJI GO 4 V4.3.2 or later).
• Added playback and deletion function for timelapse and panorama original files (requires DJI GO 4 V4.3.2 or later).
• Added C1, C2 button function to enable/disable vision system (requires DJI GO 4 V4.3.2 or later).
• Added left and right obstacle avoidance perception for Asteroid, Comet, and Waypoint Circle sub-modes of One-Take-Shooting (refer to the user manual for conditions for left and right vision system activation).
• Optimized Intelligent Flight Mode 2.0.
• Improved panorama photo stitching quality.
• Enhanced flight stability.

Notes:

• After the upgrade is complete, restart the aircraft and remote controller.
• After the firmware upgrade, flight control parameters such as height and distance limits, and return-to-home height may be reset. Please check and set them in the DJI GO 4 App.
• If the upgrade fails, please restart the aircraft and DJI GO 4 App or DJI Assistant 2 for Mavic to re-upgrade.

2018.08.23

Firmware Version: V01.00.00.00

DJI GO 4 App iOS Version: V4.3.0

DJI GO 4 App Android Version: V4.3.0

What's New?

• Added mobile timelapse function, including Free, Orbit, Point of Interest, and Waypoint modes.
• Added Swipe Pan sub-mode (Mavic 2 Zoom only).
• Added HDR and Pure Night shooting modes.
• Added Super Resolution Panorama mode (Mavic 2 Zoom only).
• Added Digital Zoom function (Mavic 2 Zoom adds 2x digital zoom in 1080p 24/25/30fps recording mode).
• Added Low Battery Return-to-Home/Forced Landing and Landing functions.
• Adjusted the default low battery warning threshold to 25%.
• Optimized the threshold for estimating completion of Point of Interest tracking for different focal lengths to improve stability (Mavic 2 Zoom only).
• Fixed an issue where panoramas could not be captured in some cases, and improved panorama photo stitching quality.
• Fixed an issue where the aircraft would automatically turn during takeoff when the compass was interfered with.
• Fixed an issue where the gimbal did not return to center when QuickShots were interrupted abnormally.
• Optimized image quality, fixed Mavic 2 Pro camera AE flickering issues, fixed Mavic 2 Zoom camera green dot issues, and improved skin tone layering issues.
• Optimized vision system for improved hover performance and obstacle perception in various scenarios.
• Optimized Intelligent Flight Mode for active tracking and added a 2m minimum altitude protection.
• Improved the quality of One-Take-Shooting synthesized videos and fixed issues with failed One-Take-Shooting.

Notes:

• The speed cruise function in Free mode of mobile timelapse is not yet protected by minimum altitude. Please pay attention to flight safety and surrounding environment when using it.