Infinity X1 Worklight with Speaker

Setup Guide

Step 1: Initial Setup

Charging: Connect the device to a power source. The indicator light will show charging status. A full charge is indicated when the light turns green or goes off (depending on the model). The battery life varies based on usage: 2.5 hours for Light Only (700 Lumens), 3.5 hours for Music Only, and unspecified for Light & Music combined.

Step 2: Pairing Speakers (Stereo Mode)

To achieve stereo sound, pair two Infinity X1 speakers:

1. Turn on both speakers.
2. Press and hold the Bluetooth button on Speaker A for 3 seconds until the Bluetooth indicator flashes.
3. On Speaker B, press and hold the Bluetooth button for 3 seconds until its Bluetooth indicator flashes.
4. Speaker A will automatically connect to Speaker B. The indicator light on both speakers will turn solid blue when successfully paired.
5. Connect your phone or device to Speaker A via Bluetooth. The device name will appear as "Infinity X1 Worklight".

Step 3: Connecting to a Phone

To connect a single speaker or the stereo pair to your phone:

1. Ensure Bluetooth is enabled on your phone.
2. Search for Bluetooth devices and select "Infinity X1 Worklight".
3. Once connected, you can play music and control playback (play, pause, skip) using your phone or the speaker buttons.

Note: For stereo mode, connect your phone to Speaker A. To connect a second phone to Speaker B, disconnect the first phone from Speaker A, then connect the second phone to Speaker B.

Range: For optimal stereo performance, place speakers up to 10 meters (33 feet) apart.

Product Information & Specifications

Battery Life (FL1 Standard)

Troubleshooting

Precautions & Warnings

• Please store and use this product at room temperature.
• Do not expose this product to rain or damp surroundings.
• Prevent this product from falling as that could result in serious damage.
• Do not dismantle, repair or modify this product on your own.
• In order to avoid any risk, do not dispose this product inappropriately or expose it to fire as there is a built-in, non-replaceable lithium battery.
• TIPS:
• Do not turn up the volume to maximum for a long time as this could shorten the service life of this product or impair your hearing.
• When encountering any fault during operation, please cut off the power supply and disconnect the USB cable to prevent further damage to the speaker or other components.
• The Bluetooth transmission range or connectivity could be affected by low battery power. In that case, please recharge immediately.
• CAUTION: Possible hazardous optical radiation emitted from this product. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 1.5 m / 5.1 ft is not expected.
• WARNING: The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths and curtains. Allow at least a 10 cm gap all around the product.
• WARNING: No naked flame sources, such as lighted candles, should be placed on the speaker.
• WARNING: This appliance is intended for domestic household use only and should not be used for any other purpose or in any other application, such as for non-domestic use or in a commercial environment.

FCC Statement of Compliance

Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: (a) frequency band(s) in which the radio equipment operates: 2.4-2.4835 GHz.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

(b) maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates: 4.30 dBm (E.I.R.P.).

Manufacturer Information

Manufacturer / Fabricant/ Fabricante:

©2021 INFINITY X1 LLC

3525 Del Mar Heights Rd, Suite 867

San Diego, CA 92130, USA

www.infinityxl.com

Questions, problems missing parts? Before returning to your retailer, call Customer Service:

USA: 1-866-544-4891

International: 1-760-230-5611

Hours: M-F 9AM to 5PM Pacific Time

Web: www.infinityx1.com/support

Email: support@infinityx1.com

OCE MADE IN CHINA