Infinity X1 HYBRID DUAL-CORE POWER FLASHLIGHT
RECHARGEABLE 2500 LUMENS
ITM. / ART. 8456-IF2500
Product Overview
To meet our commitment in reducing the impact our packaging has on the planet, we use sustainable packaging. This manual is able to dissolve in water and return to its natural state with zero impact to the environment. This QR Code [QR Code] can be used to access this manual and additional information about this product and our company.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Rechargeable Battery Specifications
| FL1 STANDARD | HIGH | MEDIUM | LOW | |
|---|---|---|---|---|
| Lumens | 2500 LUMENS | 1100 LUMENS | 350 LUMENS | |
| Beam Distance | 130 m | 80 m | 30 m | |
| Runtime | 2h | 3.5h | 5.5h | |
| Candela | 4850cd | 1750cd | 300cd | |
| Water Resistance | IPX4 ? | |||
Set-Up Instructions
Follow these steps to assemble the flashlight:
- Attach component 1 to component 2.
- Attach component 3 to the assembly.
- Attach component 4 to the assembly.
- Attach component 5 to the assembly.
Operation Modes
The flashlight features multiple brightness modes:
- High: 2500 Lumens
- Medium: 1100 Lumens
- Low: 350 Lumens
To cycle through modes:
- Press the power button once (1x) for High mode.
- Press the power button twice (2x) for Medium mode.
- Press the power button three times (3x) for Low mode.
- Press the power button four times (4x) to turn the flashlight OFF.
Power and Charging
- USB-IN: For recharging the built-in battery, use the integrated USB cable. ?
- USB-OUT: The flashlight can also charge other devices using its USB-OUT port (cable not included). ⚡
Safety Information & Warnings
CAUTION: Optical Radiation Hazard
Possible hazardous optical radiation emitted from this product. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 1.5 m / 4.9 ft is not expected.
CAUTION: Hot Surface
This flashlight may get hot. DO NOT COVER OR TOUCH flashlight lens if hot.
CAUTION: Battery Handling
- Keep batteries away from children. If swallowed, consult a physician immediately.
- Alkaline batteries may explode or leak, and cause burn injury, if recharged, disposed of in fire, mixed with a different battery type, inserted backwards, or disassembled.
- Do not recharge alkaline batteries.
- Replace all used batteries at the same time.
- Do not carry batteries loose in your pocket or purse.
- Do not remove the battery label.
- Battery leakage can cause corrosion and damage to this product. Remove used batteries promptly.
- Keep contacts clean, both on the battery and in the appliance.
- Please dispose of batteries according to local regulations for the battery chemistry.
- Compatible with alkaline batteries and rechargeable batteries.
- DO NOT mix and use alkaline batteries with rechargeable batteries together.
Working Temperature: -20 °C to 54 °C / -4 °F to 129.2 °F.
NOTE: FCC Statement of Compliance
WARNING: Changes or modifications not approved by the party responsible for compliance could void user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAN ICES-005 (B) / NMB-005 (B). This Class B digital apparatus complies with Canadian ICES-005.
Infinity X1
