eufy Pet Automatic Dog Paw Cleaner

1 OVERVIEW

The eufy Pet Automatic Dog Paw Cleaner is a cylindrical device designed for cleaning your dog's paws. Key components include:

• ① Power Button: Used to turn the device on and off.
• ② Status LED: Indicates the device's operational status (charging, fully charged, low battery).
• ③ Charging Port: For connecting the charging cable.
• ④ Container: Removable part that holds water.
• ⑤ Silicone Bristles: Soft bristles inside the container for cleaning paws.

Illustration of the eufy Pet Automatic Dog Paw Cleaner, showing its cylindrical shape, top opening, power button near the base, and charging port. Internal components like the container and silicone bristles are also indicated.

2 CHARGING

Fully charge the cleaner before first use.

Diagram shows a USB cable connecting to the charging port on the device.

Status LED Indicators:

⚠️ Do not use the cleaner while charging.

3 WASHING PAWS

1. Add a little water to the container.
2. Press the Power button [▶️].
3. Insert the paw to wash it.

Illustration shows a dog's paw being gently inserted into the top opening of the eufy Pet Automatic Dog Paw Cleaner, with a small amount of water indicated inside the container.

Note: The status LED will turn blue if the silicone bristles get stuck by the paw. In this case, take the paw out of the container, then insert it again.

⚠️ When the cleaner is powered on, do not twist the container in the opposite direction.

4 CLEANING

1. Take out the container, then pull the silicone bristles out of the container.
2. Clean the container and silicone bristles. Dry the outside of the container before putting it back.

The cleaning process involves first removing the cylindrical container from the main body of the cleaner. Then, the silicone bristles are detached from the container for separate cleaning. The exterior of the container should be dried before reassembly.

After washing, press the Power button [▶️] to stop.

5 DESENSITIZATION

How to get your dog used to the cleaner?

1. Show each individual part of the cleaner to your dog, and encourage your dog to slowly approach them. Give your dog snacks each time it gets closer until your dog actively touches the cleaner.
2. Assemble the cleaner in front of your dog, and encourage your dog to approach the cleaner. Give your dog snacks each time it gets closer until your dog actively touches the cleaner.
3. Put your dog's paw into the cleaner that is powered off, then slowly rotate the cleaner with your hand. At the beginning, give your dog snacks once the paw is put into the cleaner, then give snacks after the paw stays in the cleaner for a while. Gradually extend the duration.
4. Power on the cleaner. Help your dog feel relaxed and distract it with snacks. Encourage your dog to approach the cleaner. Give your dog snacks each time it gets closer until your dog actively touches the cleaner.
5. Keep the cleaner powered on and slowly put your dog's paw into the cleaner. At the beginning, give your dog snacks once the paw is put into the cleaner, then give snacks after the paw stays in the cleaner for a while. Gradually extend the duration.

6 NOTICE

General Safety Warnings:

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. This appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
4. This appliance contains one non-replaceable rechargeable lithium ion battery.
5. For used battery, dispose it according to local regulation.
6. For leaking battery, don't use it anymore and dispose it according to local regulation.
7. Do not expose the appliance or battery to excessive temperatures.
8. Be aware of the risk of terminals of the battery-operated appliance or battery being short-circuited by metal objects.
9. This appliance contains a non-replaceable battery. When the battery is at end of life, the appliance shall be properly disposed of.

Operating Temperatures:

• Normal temperature range for charging the battery is 0°C – 40°C.
• The suitable operating temperature range is 0°C – 40°C.

Notice (United States Of America)

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.

Notice: Shielded Cables

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

Importer Information:

Company Name: POWER MOBILE LIFE, LLC

Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004

Telephone: 1-800-988-7973

CUSTOMER SERVICE

Warranty

12-month limited warranty

Contact Us:

United States

Phone: +1 (800) 988 7973

Mon-Fri 6:15-17:00(PT), Sat-Sun 6:30-16:30(PT)

United Kingdom

Phone: +44 (0) 1604 936 200

Mon-Fri 6:00-17:00, Sat-Sun 6:00-14:00

Germany

Phone: +49 (0) 69 9579 7960

Mon-Fri 8:00-16:00

Email Us

Customer Support: support@eufylife.com

Anker Innovations Limited

Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Follow Us:

• [Facebook] @EufyOfficial
• [Instagram] @EufyOfficial
• [Twitter] @EufyOfficial