HOMCOM Massage Chair - Model 713-203V70
Model: IN250500171V01_GL
Maximum Weight Capacity: 120 kg
This document provides instructions for the assembly, operation, and maintenance of your HOMCOM massage chair. Please read carefully and retain for future reference.
Product Features
- Heating massage with three-gear temperature adjustment (M1-M2-M3)
- Eight vibration motors
- Three massage modes (PULSE, PRESS, WAVE)
- Three massage intensities
- Four massage zones, each operable individually
- Default timing: 15, 30, and 60 minutes
Assembly Instructions
The massage chair comes in two boxes. Please ensure all parts are present before assembly.
Parts List:
- Part 1: Main seat unit
- Part 2: Armrests (Left and Right)
- Part 3: Base unit
- Part 4: Side panels (Left and Right)
- Part 5: Power adapter
- Part 6: Power cord
- Part 7: Remote control cable
- Part 8: Remote control
- Part 9: Connecting cable
Assembly Steps:
- Step 01: Connect the armrests (2) to the base unit (3).
- Step 02: Attach the main seat unit (1) to the base unit (3).
- Step 03: Attach the side panels (4) to the main seat unit (1).
- Step 04: Connect the internal cables to the backrest. This includes connecting the remote control cable (9) and the power adapter cable (7) to their respective ports on the chair. Specific connections are indicated by labels (e.g., a-e, b-f, 9-c, 8-d). Cable functions include RED MASSAGE, WHITE MASSAGE, REMOTE, and POWER.
- Step 05: Connect the power adapter (5) to the power cord (6) and plug into a wall outlet. Connect the remote control cable (7) to the remote control (8).
Operation Guide
How to Use:
- Insert the adapter jack into the socket on the back of the massage chair, then plug the adapter into a wall outlet.
- Turn the unit on by pressing the ‘POWER’ button once. The LED will illuminate when powered on.
- Activate massage for a desired zone by pressing the ‘BACK’, ‘LUMBAR’, ‘THIGH’, or ‘LEG’ button. The LED will illuminate the activated zone. Press again to turn off the zone.
- To choose a massage mode, press the ‘MODE’ button. Cycle through modes by pressing ‘MODE’ until the desired mode’s LED illuminates. Available modes:
- PULSE: For deep tapping massage
- PRESS: Provides rapid tapping massage
- WAVE: For a gradual, side-to-side vibrating massage
- Press the ‘INTENSITY’ button to change massage intensity. The HIGH or LOW LED will illuminate for the chosen intensity.
Note: Stop using immediately if you feel any discomfort or pain.
The massage chair includes an auto shut-off feature. Do not use this chair continuously for more than 60 minutes.
Technical Specifications
Voltage Parameters:
| Input voltage | AC110-240V DC12V |
| Input AC frequency | 50/60 Hz |
| Output voltage | DC12V |
| Output current | 1A |
| Output power | 12W |
| Voltage Grade | Class III |
| Frequency | 50-60Hz |
Product Features Summary:
- Heating massage with three-gear adjustment.
- Eight vibration motors.
- Three massage modes.
- Three massage intensities.
- Four massage zones, individually controllable.
- Default timer settings: 15, 30, and 60 minutes.
Adapter Models:
The following adapter models are specified:
- 12V1A CE: Model IVP1200-1000WG
- 12V1A BS: Model IVP1200-1000B
- 12V1A ETL: Model IVP1200-1000
Efficiency details for these models are provided in the original documentation.
Important Safety Instructions
- Use this product on a 12V circuit, connected to a properly configured outlet.
- Unplug the product from the power source before cleaning or when not in use.
- Do not reach for the product if it falls into water; unplug immediately.
- Never leave the product unattended when plugged in.
- Do not use outdoors.
- Do not carry the product by its power cord.
- Keep the cord away from heated surfaces.
- Supervise children when they are using the product or nearby. Ensure children do not play with the product.
- Do not operate where aerosol products are used or oxygen is administered.
- To disconnect, press the ‘POWER’ button to ‘OFF’, ensure all functions have stopped, and remove the plug.
- Use the appliance only for its intended purpose as described in this manual. Do not use unprovided attachments.
Health Cautions:
- Consult a doctor before use if you have health concerns.
- Individuals with pacemakers should not use this product.
- If you experience prolonged muscle or joint pain, stop use and consult your doctor.
Maintenance Instructions:
- To Store: Place in original box or a dry, cool place away from sharp objects. Do not wrap the power cord around the unit or hang the unit by its cord.
- To Clean: Unplug and let cool. Clean fabric with a damp sponge or cloth and mild detergent. Pat dry with a clean cloth. Do not use abrasive cleaners, solvents, or water hotter than 50°C.
Contact Information
For questions, please contact the customer care center:
- US: 001-877-644-9366, customerservice@aosom.com
- CA: 416-792-6088, customerservice@aosom.ca
- FR: 0033-1-84166106, aosom@mhfrance.fr
- DE: +49 40 87408465, service@aosom.de
- IT: 0039-0249471447, clienti@aosom.it
- ES/PT: 0034-931294512, atencioncliente@aosom.es / info@aosom.pt
- UK: 0044-800-240-4004, enquiries@mhstar.co.uk
Contact details for importers/manufacturers are also provided in the original document.
