HOMCOM Reclining Lift Chair with Massage Function
Model: 713-042V91
Part Number: IN240300051V01_GL
Important Safety Information
Please read carefully and retain for future reference.
This product is intended for domestic use only.
Instructions for Use:
- Place the chair stably on a flat floor.
- Keep away from open flames and heat sources.
- Avoid overloading the chair.
Precautions Before Assembly:
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance:
- Clean with a soft fabric.
- Check the seating regularly.
Storage Conditions:
- The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Assembly Warnings:
Beware of crushing and cutting hazards during assembly. The manufacturer declines all responsibility in case of damages due to improper installation or environmental factors.
Warning! Replacement and repair of components for height adjustment of seating furniture with energy storage must only be performed by qualified personnel.
Electrical Safety:
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- The appliance is only to be used with the power supply unit provided with the appliance.
- The external flexible cable or cord of this transformer cannot be replaced; if the cord is damaged, the transformer shall be scrapped.
- If the appliance has a heated surface, persons insensitive to heat must be careful when using the appliance.
- The power supply unit shall not be used if pins of the plug part are damaged.
Product Components
The product includes the following main components:
- A: Seat and backrest cushion assembly (1 unit)
- B: Chair base unit (1 unit)
- C: Power adapter cable (1 unit)
- D: Power adapter block (1 unit)
- E: Handheld controller with cable (1 unit)
- F: Power cord (1 unit)
Assembly Instructions
Step 01: Connect the seat and backrest unit (A) to the chair base unit (B). Ensure the mechanical connection is secure.
Step 02: Connect the power adapter (D, C) and power cord (F) to the chair and a power outlet. The controller (E) connects to the chair.
Operation
Height Adjustment:
Use the handheld controller to adjust the chair's height:
- Up: Press the designated button to raise the chair.
- Down: Press the designated button to lower the chair.
Massager Functions
Controller Layout and Operation:
The handheld controller allows you to operate the massage features:
- POWER: Turn on/off the unit.
- HEAT: Turn the heating function on/off.
- INTENSITY: Select high/low vibration intensity.
- MODE: Select working mode (PULSE, PRESS, WAVE, AUTO, NORMAL).
- BACK: Select back massage function.
- LUMBAR: Select lumbar massage function.
- THIGH: Select thigh massage function.
- LEG: Select leg massage function.
- TIMER: Set working time (15min, 30min, 60min).
Operating Steps:
- Insert the power into the DC socket.
- Press the POWER key to start the unit.
- Press the HEAT key to turn on the heating function.
- Press the TIMER key; the unit's control time will switch between 15min, 30min, and 60min.
- Press the MODE key to select different working modes (PULSE, PRESS, WAVE, AUTO, NORMAL).
- Press the INTENSITY key to switch the intensity of vibration.
- Press the BACK, LUMBAR, LEG, and THIGH keys to massage different parts of the body.
Technical Specifications
MASSAGE Unit:
| Parameter | Value |
| Input voltage | 100-240 V |
| Input AC frequency | 50/60 Hz |
| Output voltage | 12 V |
| Output current | 0.5 A |
| Output power | 6 W |
| Average active efficiency | 85 % |
| Efficiency at low load (10%) | 76.58-72.73% |
| No-load power consumption | 0.074-0.104 W |
HELP STATION Unit:
| Parameter | Value |
| Input voltage | 100-240 V |
| Input AC frequency | 50-60 Hz |
| Output voltage | 29 V |
| Output current | 2 A |
| Output power | 58 W |
| Average active efficiency | 85 % |
| Efficiency at low load (10 %) | 72.73 % |
| No-load power consumption | 0.104 W |
Contact Information
For any questions, please contact the customer care center:
- US: 001-877-644-9366, customerservice@aosom.com (Imported by Aosom LLC)
- CA: 416-792-6088, customerservice@aosom.ca (Imported by Aosom Canada Inc.)
- UK: 0044-800-240-4004, enquiries@mhstar.co.uk (Importer: MH STAR UK LTD)
- DE: +49 4087408465, service@aosom.de (Importer: MH Handel GmbH)
- IT: 0039-0249471447, clienti@aosom.it (Importer: AOSOM Italy srl)
- ES: 0034-931294512, atencioncliente@aosom.es (Importer: SPANISH AOSOM, S.L.)
- PT: 0034-931294512, info@aosom.pt (Importer: SPANISH AOSOM, S.L)
- FR: 0033-1-84166106, aosom@mhfrance.fr (Importer: MH FRANCE)
All products are made in China.
Recycling Information
This appliance, its accessories, cords, and batteries are recyclable. Please dispose of them responsibly at designated collection points or through recycling services.
