Anko
43587674 ADULT INFLATABLE CLOWN COSTUME
Size: ONE SIZE
FITS MOST
Instructions:
Components
Image shows the components of the inflatable costume: the deflated costume suit, an orange fan unit, and a black battery compartment with wires.
Step 1
Take out the fan and twist off the top cover.
Step 2
Put the fan in the round hole of the inside of the costume.
Step 3
Twist the top cover to secure the fan.
Step 4
Put the battery case into the pocket of the costume and plug in the USB.
Diagram shows a black battery compartment with four slots labeled 'AA 1.5V'. It indicates 'ON' and 'OFF' switches and a USB connector. Text states: '4 x 1.5V AA size batteries are included. Follow the polarity markings when replacing the batteries. We recommend using alkaline batteries.'
Step 5
Put on the costume and switch the fan on, then zip up the costume.
Finished
Image shows the fully inflated adult clown costume on a mannequin or person.
WARNING: BATTERIES ARE TO BE INSERTED WITH THE CORRECT POLARITY.
DO NOT MIX DIFFERENT TYPES OF BATTERIES OR NEW AND USED BATTERIES.
NON-RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED.
RECHARGEABLE BATTERIES ARE TO BE REMOVED FROM THE PRODUCT BEFORE BEING CHARGED. THE SUPPLY TERMINALS ARE NOT TO BE SHORT-CIRCUITED.
REMOVE BATTERIES FROM THE PRODUCT WHEN NOT IN USE FOR EXTENDED PERIODS OR WHEN BATTERIES BECOME EXHAUSTED. DISPOSE OF BATTERIES RESPONSIBLY. DO NOT DISPOSE OF IN FIRE.
- THE FAN AND THE BATTERY COMPARTMENT SHALL BE REGULARLY EXAMINED FOR DAMAGES TO THE SUPPLY CORD, USB, ENCLOSURE OR OTHER PARTS. IN THE EVENT OF DAMAGE, DISCONTINUE USE OF PRODUCT UNTIL DAMAGES HAVE BEEN REPAIRED.
- WARNING: FOR ADULT USE ONLY.
- THE COSTUME SHOULD ONLY BE USED WITH THE FAN AND BATTERY COMPARTMENT SUPPLIED BY THE MANUFACTURER.
- THE FAN IS NOT A TOY, PLEASE USE AS INTENDED.
- REMOVE THE FAN, USB AND BATTERY COMPARTMENT BEFORE WASH.
Model Number: 43587674
Size: 150x250mm
