Anko

Instructions

Components

The costume kit includes: an inflatable costume, a fan unit with a battery compartment, and a USB cable.

Setup Steps

1. Step 1: Take out the fan unit and twist off its top cover.
2. Step 2: Insert the fan into the designated round hole on the inside of the costume.
3. Step 3: Secure the fan by twisting the top cover back into place.
4. Step 4: Place the battery case into the costume's pocket and connect it via the USB cable. The costume requires 4 x 1.5V AA size batteries (included). Ensure correct polarity when inserting batteries. Alkaline batteries are recommended.
5. Step 5: Put on the costume and switch the fan on to inflate it.

Important Warnings and Safety Information

Battery Safety

WARNING: BATTERIES ARE TO BE INSERTED WITH THE CORRECT POLARITY. DO NOT MIX DIFFERENT TYPES OF BATTERIES OR NEW AND USED BATTERIES. NON-RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED. RECHARGEABLE BATTERIES ARE TO BE REMOVED FROM THE PRODUCT BEFORE BEING CHARGED. THE SUPPLY TERMINALS ARE NOT TO BE SHORT-CIRCUITED. REMOVE BATTERIES FROM THE PRODUCT WHEN NOT IN USE FOR EXTENDED PERIODS OR WHEN BATTERIES BECOME EXHAUSTED. DISPOSE OF BATTERIES RESPONSIBLY. DO NOT DISPOSE OF IN FIRE.

General Usage and Care

1. The fan and battery compartment shall be regularly examined for damages to the supply cord, USB, enclosure, or other parts. In the event of damage, discontinue use of product until damages have been repaired.
2. Warning: For adult use only.
3. The costume should only be used with the fan and battery compartment supplied by the manufacturer.
4. The fan is not a toy; please use as intended.
5. Remove the fan, USB, and battery compartment before washing the costume.