Overview
The NOTIFIER ACPS-2406 is an auxiliary addressable power supply and battery charger designed for fire alarm systems. It provides 24 VDC outputs and supports FlashScan® or CLIP modes, featuring integrated strobe synchronization.
Key Features
- Addressable by FlashScan® or CLIP FACPs.
- Strobe/NAC synchronization capabilities with various manufacturers.
- Provides four coded or non-coded NACs, or four-wire detector power.
- Power-limited outputs and charges 7 to 25 AH batteries.
- Includes auxiliary +24 VDC output and isolated SLC interface.
- Features brownout detection, battery/charger supervision, and AC loss detection.
Installation and Configuration
This manual details installation procedures for various cabinets (CAB-3, BB-25, CAB-PS1), wiring guidelines, and DIP switch configurations for addressing and operational modes. It also covers panel programming requirements and software type ID codes.
Applications
The ACPS-2406 supports NAC outputs, general purpose power, and Style B (Class B) Initiating Device Circuits. It facilitates synchronization for alarm devices and integrates with UZC-256 Universal Zone Coders.
Technical Details
The document outlines power specifications, DC current draw calculations for standby and alarm conditions, and battery calculations to determine required ampere-hour capacity, adhering to NFPA and UL standards.
