Sealey SAC42055B.V2 Compressor Parts Information
Model No: SAC42055B.V2
Compressor 200ltr Belt Drive 5.5hp 3ph, 2-Stage with Cast Cylinders
Page 1 Parts List
| Item | Part No. | Description |
|---|---|---|
| 1 | SAC3021120000 | PUMP (AB808) |
| 2 | SAC7456190000 | BELT GUARD SUPPORT |
| 3 | V/A67 | V-BELT (ID-1700) A67 |
| 4 | SAC5010860008 | BASE PLATE |
| 5 | SAC7232070000 | EXTENSION 1/2" |
| 6 | SAC7190090000 | NON-RETURN VALVE |
| 7 | SAC7231550000 | DELIVERY PIPE |
| 8 | SAC7230010000 | RISLAN HOSE (SOLD PER 1 METER) |
| 9 | SAC7130150000 | BALL VALVE 1/2"BSP FEMALE-1/2"BSP MALE |
| 10 | SAC4170110000 | BELT GUARD KIT |
| 11 | SAC5150300008 | TANK 200ltr |
| 12 | SAC7090030000 | PLUG 1/2 |
| 13 | SAC7130160000 | DRAIN VALVE 3/8"BSP MALE |
| 14 | SAC7090080000 | PLUG |
| 15 | SAC7250500000 | PRESSURE SWITCH 16Amp 8-10Bar |
| 15.1 | SAC7082690000 | T-JOINT 3/8"BSP MALE X2-3/8"BSP FEMALE |
| 15.2 | SAC7250500000 | PRESSURE SWITCH 16Amp 8-10Bar |
| 15.3 | SAC7090070000 | PLUG 1/4" |
| 15.4 | SAC7328690000 | POWER CABLE |
| 15.5 | SAC7328700000 | PRESSURE SWITCH CABLE (4x2.5mm) |
| 16 | SAC7192090000 | SAFETY VALVE 10bar 3/8"BSP MALE |
| 17 | SAC7110060000 | GAUGE 230psi, 60mm OD, REAR FITTING |
| 18 | SAC4151820000 | MOTOR/PULLEY KIT |
| SAC7405610000 | MOTOR PULLEY - 190MM TWIN BELT (STANDARD) (NOT SHOWN) | |
| SAC4080450000 | SCREW KIT (NOT SHOWN) |
Diagram 1: Main Compressor Assembly Overview
This diagram illustrates the overall layout of the compressor unit. Key components are identified by numbers:
- 1: Pump (AB808)
- 2: Belt Guard Support
- 3: V-Belt (ID-1700 A67)
- 4: Base Plate
- 5: Extension 1/2"
- 6: Non-Return Valve
- 7: Delivery Pipe
- 8: Rislan Hose (supplied per meter)
- 9: Ball Valve (1/2" BSP Female to 1/2" BSP Male)
- 10: Belt Guard Kit
- 11: Tank (200ltr capacity)
- 12: Plug (1/2")
- 13: Drain Valve (3/8" BSP Male)
- 14: Plug
- 15: Pressure Switch assembly, including a 16Amp switch (8-10 Bar) and a T-joint fitting.
- 15.1: T-Joint (3/8" BSP Male X2 to 3/8" BSP Female)
- 15.2: Pressure Switch (16Amp, 8-10 Bar)
- 15.3: Plug (1/4")
- 15.4: Power Cable
- 15.5: Pressure Switch Cable (4x2.5mm²)
- 16: Safety Valve (10 Bar, 3/8" BSP Male)
- 17: Gauge (230psi, 60mm OD, Rear Fitting)
- 18: Motor/Pulley Kit
- (Not Shown): Motor Pulley (190mm Twin Belt, Standard) and Screw Kit.
Page 2 Parts List
| Item | Part No. | Description |
|---|---|---|
| 1 | SAC5071020008 | CRANKCASE |
| 2 | SAC7650080000 | REAR COVER |
| 3 | B/6206 | BEARING 6206 |
| 4 | SAC5041490008 | CRANKSHAFT |
| 5 | B/6205 | BEARING 6205 |
| 6 | SAC7650070000 | FRONT COVER |
| 7 | SAC7090090000 | PLUG 1/4" |
| 8 | SAC7180060000 | OIL SIGHT GLASS |
| 9 | SAC7051520000 | KEY |
| 10 | SAC7575460000 | CYLINDER |
| 11 | SAC4231230000 | VALVE PLATE (SQUARED ENDS - COPPER GASKET) |
| 12 | SAC5030610008 | HEAD |
| 13 | SAC9700000300 | BREATHER PLUG |
| 14 | SAC7232220000 | AFTERCOOLER |
| 15 | SAC5130110008 | AFTERCOOLER CLAMP |
| 16 | SAC7043050000 | CLAMP |
| SAC7192350000 | SAFETY VALVE 1/4"BSP MALE 6bar (NOT SHOWN) | |
| 18 | SAC7081190000 | JOINT |
| 19 | SAC7201240000 | FLYWHEEL |
| 20 | SAC7650090000 | CRANKCASE BASE |
| 21 | SAC4082280000 | GASKET KIT |
| 22 | SAC4080920000 | SCREW KIT |
| 23 | SAC4080290000 | INTAKE FILTER KIT |
| 23.3 | SAC7210690000 | FILTER COVER |
| 24 | SAC4080850000 | LP CON ROD/PISTON KIT |
| 24.1 | SAC4080840000 | LP PISTON RING KIT |
| 24.2 | SAC7220340000 | PISTON |
| 24.3 | SAC7050270000 | PISTON PIN |
| 24.5 | SAC5050580008 | CON ROD |
| 25 | SAC4080860000 | HP CON ROD/PISTON KIT |
| 25.1 | SAC4080080000 | PISTON RING SET (HIGH) |
| 25.2 | SAC7220120000 | PISTON (HIGH) |
| 25.3 | SAC5050580008 | CON ROD |
| 25.4 | SAC7050130000 | PISTON PIN |
Diagram 2: Compressor Internal Components Exploded View
This diagram provides a detailed exploded view of the internal components of the compressor's pump and motor assembly. Key numbered parts include:
- 1: Crankcase
- 2: Rear Cover
- 3: Bearing (6206)
- 4: Crankshaft
- 5: Bearing (6205)
- 6: Front Cover
- 7: Plug (1/4")
- 8: Oil Sight Glass
- 9: Key
- 10: Cylinder
- 11: Valve Plate (with squared ends and copper gasket)
- 12: Head
- 13: Breather Plug
- 14: Aftercooler
- 15: Aftercooler Clamp
- 16: Clamp
- (Not Shown): Safety Valve (1/4" BSP Male, 6 Bar)
- 18: Joint
- 19: Flywheel
- 20: Crankcase Base
- 21: Gasket Kit
- 22: Screw Kit
- 23: Intake Filter Kit
- 23.3: Filter Cover
- 24: LP (Low Pressure) Con Rod/Piston Kit
- 24.1: LP Piston Ring Kit
- 24.2: Piston (LP)
- 24.3: Piston Pin (LP)
- 24.5: Con Rod (LP)
- 25: HP (High Pressure) Con Rod/Piston Kit
- 25.1: Piston Ring Set (High Pressure)
- 25.2: Piston (High Pressure)
- 25.3: Con Rod (HP)
- 25.4: Piston Pin (HP)
Important Notes and Warranty
Note: Sealey Group's policy is to continually improve products. As such, they reserve the right to alter data, specifications, and component parts without prior notice.
Important: No liability is accepted for incorrect use of the product.
Warranty: A 12-month guarantee is provided from the purchase date. Proof of purchase will be required for any claim.
Contact Information:
Sealey Group
Kempson Way, Suffolk Business Park
Bury St Edmunds, Suffolk. IP32 7AR
Phone: 01284 757500 | Fax: 01284 703534
Email: sales@sealey.co.uk
Website: www.sealey.co.uk
