Staples Traymore Chair Operator's Manual
Model No. ST63140 / ST63141
IMPORTANT: READ CAREFULLY BEFORE USE
Product Support: 1-800-425-0049
Easy Assembly
Staples® is leading the way in taking some of the stress and frustration out of chair assembly. We develop our instructions with the right amount of detail for easy assembly. If you are confused during any step, call the number located at the bottom of the front page for assistance from a friendly representative.
Need help with assembly? Questions?
Call our Product Support experts
9:00 am-8:00 pm, Eastern Time
1-800-425-0049
Built to Impress
Staples® Chairs offer high quality at prices you'll love. With the quality you demand and rigorous performance testing, Staples® Brand chairs are made to last and impress. Before we put our name on the box, it has to meet our highest standards - and yours.
You'll enjoy an ever-growing assortment of products to better meet your needs. From stylish desk accessories and organizing systems to office desks and chairs, chances are we have something you'll count on day in, day out. The icing on the cake is our great low prices. Staples® Brand products are designed to fit your style and your budget.
Product Features
Sit Down on the Job in Custom Comfort
The Staples® Brand chair is built for everyone's comfort. It's packed with features that make it easy to fine-tune comfort to meet your unique needs.
Seat Height Adjustment
Seat height adjusts to assure correct posture and relieves stress on back, thighs, and legs.
Upright Seat Tilt Lock
Simple locking mechanism fixes the seat in an upright position to assure healthy posture.
Tilt Tension Adjustment
Easy adjustment of chair flexibility avoids heavy pushing and relaxes muscles.
Arm Height Adjustment
Arms adjust up and down or swivel to ease pressure on the neck and support shoulders.
Features Instructions
Seat Height Adjustment
- To raise the seat: Lean slightly forward while seated to relieve pressure on the tilt mechanism. Reach under the right side of the chair and locate the handle. Raise yourself slightly to allow the chair to reach your desired height.
- To lower the seat: Remain seated and lift the handle upwards until the chair lowers to your desired height.
Upright Seat Tilt Lock
- Locate the handle underneath the right side of the seat.
- Pulling the handle all the way out allows the chair to tilt.
- Pushing the handle in when the chair is in the fully upright position locks the chair in place.
Tilt Tension Adjustment
- Grasp the round cylinder knob under the front center of the seat.
- For firmer/stiffer: Turn clockwise.
- For softer/looser: Turn counter clockwise.
Arm Height Adjustment
- Press the buttons on the chair arms to allow the arms to move up or down freely.
- Release the buttons once the desired height is reached.
Included Parts
- Screws: Blue Screw (x4), Green Screw (x4), Yellow Screw (x2), Yellow Screw (x4)
- Chair Components: Back (x1), Seat (x1), Arms (x2)
- Base Components: Seat Plate (x1), Gas Lift (x1), Base (x1)
- Wheels: Caster (x5), Telescopic Cover (x1)
- Tools Provided: Allen Wrench (x1)
Chair bolts, screws, and knobs may loosen during use. Please tighten your chair's hardware each month. Each piece of hardware needed for each step is located in the corresponding segment in your Easy Parts Pack.
Setup
Step 1
Attach the casters (7) to the base (6). Insert the gas lift (5) into the center of the base (6), and place the telescopic cover (8) over the gas lift.
Step 2
Attach the seat plate assembly (4) to the underside of the seat (2) using the Yellow Screws (C x2) and Yellow Screws (D x4). Use the Allen wrench for tightening.
Step 3
Attach the arms (3) to the underside of the seat (2) using the Blue Screws (A x4).
Step 4
Attach the back (1) to the seat plate assembly (4) using the Green Screws (B x4).
Step 5
Align the seat assembly with the gas lift on the base and lower it into place.
Step 6
To secure the seat into the base, sit down on the chair. Use the easy adjustment instructions to ensure custom comfort.
Step 7
The finished product is your assembled Traymore Chair, ready for use.
Warranty
Staples the Office Superstore, LLC ("Staples") warrants to the original purchaser of this Staples® Brand Chair against defects in design, assembly, material, or workmanship for 5 years from the original date of purchase. In the event of a defect, Staples will replace any such defective part. Parts included under this warranty are non-moving metal components, chair frame, pneumatic cylinder, upholstery, and all other parts. To claim replacement parts, contact product support at 1-800-425-0049. Original receipt or proof of purchase is required. This warranty is based on up to 5 hours of continual use within a 24-hour period for users weighing up to 275 lb. (124 kgs).
Claims under this limited warranty shall be limited to replacement of 100% of the chair or refund of purchase price at Staples' sole option. This warranty does not apply to normal wear or damage from misuse, abuse, improper storage or handling, installation, accident, repair, or alteration, or other circumstances not directly attributable to manufacturing or material defects.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. STAPLES SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL STAPLES BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES (SUCH AS BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) RELATED TO THIS PRODUCT.
This warranty gives you specific legal rights, and you may also have other rights that vary depending upon the state, province, territory, or country. Some states, provinces, and territories do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied warranty lasts. Except as stated herein, no other warranties shall apply.
