Baseus Super Si Pro Quick Charger C+U 30W US User Manual

1. Product Parameter

Name: Super Si Pro Quick Charger

Material: PC

Model No.: CCCJG30CS

Input: AC 100-240V~, 50/60Hz, 1.2A Max.

Type-C Output: 5V/9V-3A, 12V-2.5A, 12V-2A, 20V-1.5A

USB Output: 5V/9V-3A, 12V-2.5A, 20V-1.5A

Type-C+USB Output: 18W+12W

18W Details: 5V-2.4A, 9V-2A, 12V-1.5A

12W Details: 5V-2.4A, 9V-1.33A, 12V-1.0A

Product size: 35×30×48.2mm (Without pins)

Product weight: About 64g

The above data are measured by the Baseus laboratory; the actual use will be slightly different depending on the specific circumstances.

[QR Code] Scan to View User Manual

2. Packing List

• Charger ×1
• User manual ×1
• Warranty card ×1

3. Product Diagram

This product is a dual-port (Type-C+USB) 30W fast charger using a new type of semiconductor material (Super silicon). The maximum output power of the Type-C single port can reach 30W (20V-1.5A). It is equipped with Baseus's leading BPS II power distribution technology. Both ports are fast charging when used separately. The product supports PD3.0, QC3.0, Apple2.4, BC1.2 and other fast charging protocols, as well as PD fast charging for most mobile phones including new iP phones, and tablets. The product has built-in multiple safety protection circuits such as overcurrent, overvoltage, and temperature protection.

4. Use Environment

• Operating environment: non-tropical areas below 2000m above sea level.
• Not to be used in tropical regions.
• Not to be used above 2000m.
• Not suitable for outdoors.

5. Tips

Please read all instructions and warnings before using this product. Non-standard use will damage the product or personal safety.

• Do not store the product in high temperature, strong light, and strong magnetic field. Do not place it in other harsh environments such as fire source.
• Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
• Consumer shall be liable for any personal and property damage resulted from their improper use against the user manual or ignoring the warning, to which our company will not bear any legal liability.
• Disintegration of this product by non-professionals is strictly prohibited.
• Use of household appliances or loads in excess of the output current of this product shall be avoided (no output due to circuit protection).
• Intense physical actions including knocking, throwing, trampling on and squeezing, etc. shall be avoided.

6. Statement on Toxic and Hazardous Substances in Electronic Information Products

This form is compiled in accordance with SJ/T 11364.

O: It indicates that the content of the toxic and harmful substance in all homogeneous materials of the component is below the limit specified in GB/T 26572 standard.

X: The content of toxic and harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard.

This Product complies with EU RoHS 2.0 Directive (2011/65/EU)

7. Icon Description

The 10-year icon refers to the "effective life of environmental protection", not the product quality assurance period. Electronic products all contain toxic and harmful substances such as lead, mercury and cadmium. Once they are overused, toxic and harmful substances may leak or mutate, cause pollution to the environment, or cause serious damage to people and property.

The term of "environmental protection use" means that all electronic products will be required to use within this effective period. Baseus will no longer be responsible for the quality of the products due to the safety risks that arise after the safe use period.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

[FCC Logo] [CE Logo] [RoHS Logo] [WEEE Logo] [Energy Efficiency Logo]

Manufacturer Information

Shenzhen Times Innovation Technology Co., Ltd.

Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen

Manufacturer: Shen Zhen Heincro Technology Co. Ltd.

Manufacturer address: 22F, BC Building, 3# of Shayuan 1st Rd, Keyuancheng, TangXia Town, Dongguan City, China

Executive Standard: Q/SSCZ009-2019

Hotline: +86-4000-712-711

Website: www.baseus.com

Copyright © 2010-2021 Shenzhen Times Innovation Technology Co.,Ltd. All Rights Reserved

Model: PB3034Z

Designed by Baseus

Made in China

Please follow the above safety instructions otherwise it will cause fire, electric shock, damage or other damage.