Baseus GaN3 Pro 100W Desktop Fast Charger

Product Parameters

Packing List

• Charger × 1
• User Manual × 1
• Warranty Card × 1
• 5A xiaobai series Type-C to Type-C 20V-5A 100W Charging Cable (With E-marker Chip) × 1

Product Diagram

An illustration shows the Baseus GaN3 Pro desktop charger, a rectangular white device with two USB-C ports and two USB-A ports on the front. A coiled cable with a Type-C connector is attached.

The diagram indicates the charger's ports: Type-C1 Output, USB1 Output, Type-C2 Output, USB2 Output.

Product Description

This product is a desktop fast charging charger with a maximum output power of 100W, utilizing a new semiconductor material (GaN) process. It features a 1.5m AC extension cable, 4-port output (2C+2U), and supports comprehensive fast charging protocols including QC4+, PD3.0, QC3.0, QC2.0, SCP, FCP, AFC, and PE+. It provides full-speed fast charging for most notebook computers, with Type-C1 or Type-C2 capable of 100W output (20V=5A) when used individually. It also supports fast charging for Huawei 22.5W SCP, Samsung 45W, Xiaomi 27W, and other mobile phones, enabling fast charging for most mobile phones and laptops. The product includes multiple safety protection circuits for over-current, over-voltage, and temperature.

Use Environment

Use ambient temperature: non-tropical areas with an altitude below 2000m.

Icon Description

The 10-year icon refers to the "effective life of environmental protection," not the product quality assurance period. Electronic products contain toxic and harmful substances like lead, mercury, and cadmium. Overuse can lead to leakage or mutation of these substances, causing environmental pollution or serious damage to people and property. The "environmental protection use" period signifies that all electronic products should be used within this effective timeframe. Baseus is not responsible for product quality issues arising after the safe use period.

Tips

Please read all instructions and warnings before using this product. Non-standard use may damage the product or endanger personal safety.

• Do not store the product in high temperature, strong light, or strong magnetic fields. Avoid placing it near fire sources or in other harsh environments.
• Improper use of the product can lead to damage or endanger personal and property safety.
• Consumers are responsible for any personal or property damage resulting from improper use contrary to the user manual or warnings. Baseus will not bear any legal liability.
• Disassembly of this product by non-professionals is strictly prohibited.
• Avoid using appliances or loads that exceed the product's output current (the circuit will protect and cease output).
• Avoid intense physical actions such as knocking, throwing, trampling, or squeezing.

Statement on Toxic and Hazardous Substances in Electronic Information Products

This table indicates the presence of toxic or hazardous substances in electronic components. 'O' signifies that the content is below the limit specified in GB/T 26572 standard, while 'X' indicates that the content exceeds the limit in at least one homogeneous material. The product complies with the EU RoHS 2.0 directive (2011/65/EU).

Compliance and Safety

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Certification: ETL Certified [? ETL Certified] (Conforms to UL Std. 62368-1, Certified to CSA Std. C22.2 No. 62368-1), FCC Compliant [? FCC Compliant].

Warning: Please follow the above safety instructions; otherwise, it may cause fire, electric shock, damage, or other harm.

Manufacturer Information

Manufacturer: Shenzhen Times Innovation Technology Co., Ltd.

Address: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China.

Manufacturer (Secondary): SHELL ELECTRONIC LIMITED

Manufacturer Address (Secondary): 2F, BC Building, 3# of Shayuan 1st Rd, Keyuancheng, Tangxia Town, 523710 Dongguan City, China.

Executive Standard: Q/SSCZ 009

Hotline: +86-4000-712-711

Website: www.baseus.com

Design: Designed by Baseus

Origin: Made in China

Model Identifier: PB3144Z-P0A1