JOOLA WORLD CUP Table Tennis Table
Installation Instructions
Product Variants
Art. 11481 JOOLA WORLD CUP blue
Art. 11480 JOOLA WORLD CUP green
Company Information
JOOLA Tischtennis GmbH & Co. KG
Wiesenstr. 13
D-76877 Siebeldingen
Tel.: ++49 - 63 45 - 95 47 - 0
Fax: ++49 - 63 45 – 95 47 – 11
Email: info@joola.de
Website: www.joola.com
Parts List
Illustration Description | Identifier | Quantity |
---|---|---|
Bolt with hex head, long (approx. 70mm) | M8x70 | 2x |
Nut, hex, M8 | SM8 | 2x |
Bolt with hex head, medium (approx. 70mm) | M8 | 2x |
Washer, flat, large bore (approx. 10mm outer, 8mm inner, 15mm thick) | Ø 10/8/15 | 2x |
Bolt with hex head, medium (approx. 40mm) | M6x40 | 8x |
Bolt with hex head, medium (approx. 50mm) | M6x50 | 8x |
Bolt with hex head, medium (approx. 60mm) | M6x60 | 4x |
Bolt with hex head, long (approx. 80mm) | M6x80 | 4x |
Nut, hex, M6 | SM6 | 24x |
Washer, flat, small bore (approx. 6.4mm inner diameter) | Ø 6,4 | 4x |
Washer, large, thick (approx. 15mm outer, 6.3mm inner, 15mm thick) | Ø 15x6,3x15 | 4x |
Assembly Instructions
Step 1
Attach the first vertical support leg to the base frame of one table half. Use two M6x40 bolts and two SM6 nuts/washers. The bolts pass through the frame and leg, secured by the nuts.
Step 2
Attach the second vertical support leg to the base frame of the same table half. Use two M6x50 bolts and two SM6 nuts/washers. The bolts pass through the frame and leg, secured by the nuts.
Step 3
Connect the two table halves together. Align the central hinge mechanisms. Secure them using two M8x70 bolts, two SM8 nuts/washers, two M8 bolts, and two Ø 10/8/15 washers. The M8x70 bolts go through the hinge plates and frame, secured by SM8 nuts. The M8 bolts pass through other parts of the hinge, secured by the larger washers.
Step 4
Attach the first set of support legs to the underside of one table half. Use two M6x80 bolts and two SM6 nuts/washers. The bolts pass through the frame and support leg, secured by the nuts.
Step 5
Attach the second set of support legs to the underside of the same table half. Use two M6x50 bolts, two Ø 6.4 washers, and two SM6 nuts/washers. The bolts pass through the frame and support leg, with the washers and nuts securing them.
Step 6
Attach the final set of support legs to the underside of the other table half. Use two M6x60 bolts, two Ø 15x6,3x15 washers, and two SM6 nuts/washers. The bolts pass through the frame and support leg, with the washers and nuts securing them.