Dual XDVD110BT DVD Multimedia Receiver with 7" Touch Screen Display

Safety Notes

⚠️ The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when the vehicle is in park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.

Copyright Notes

This product incorporates copyright protection technology owned by Macrovision Corporation and other rights owners. Use of this technology must be authorized by Macrovision Corporation and is intended for limited viewing uses. Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

DVD logo is a trademark of DVD Format/Licensing Corporation.

iPod and iPhone are trademarks of Apple Inc. Dual Electronics Corporation is not affiliated with Apple, Inc.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Namsung is under license.

SD logo is a trademark of SD-3C, LLC.

Other trademarks and trade names are those of their respective owners.

Warning Statement

⚠️ Upon installation of this Monitor/DVD player ("unit") into a vehicle, the driver must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction, resulting in serious injury or death to vehicle occupants or persons outside the vehicle, and/or property damage.

Several states prohibit monitors/DVD players if the screen is visible from the driver's seat. If such a law exists in your jurisdiction, this unit must not be installed so the screen is visible from the driver's seat. Position the unit to face the front passenger seat only. Failure to follow this instruction could lead to driver distraction, resulting in serious injury or death.

This unit is designed to operate only when the vehicle is in "Park" and the parking brake is fully engaged. It includes a parking brake lock-out feature. Connect the parking brake detect wire ("Pink Lead") to the parking brake mechanism. DO NOT simply ground the wire. Failure to properly install this feature could lead to driver distraction, resulting in serious injury or death.

Once installed, do not attempt to disrupt/neutralize the parking brake lock-out feature by partially engaging the brake or using unauthorized devices. Failure to follow these instructions could lead to driver distraction, resulting in serious injury or death.

When operating, keep the volume low enough to hear traffic-related sounds (e.g., police and emergency vehicles). Failure to follow this instruction could lead to driver distraction, resulting in serious injury or death.

Safety Information

Please read all instructions carefully before attempting to install or operate.

Installation by a professional installer or authorized dealer is highly recommended due to the technical nature of the product. This product is for use in vehicles with 12VDC negative ground only.

To prevent damage or injury:

• Securely ground the unit to the vehicle chassis ground.
• Do not remove the top or bottom covers of the unit.
• Do not install in direct sunlight, excessive heat, or where water splashing is possible.
• Do not subject the unit to excessive shock.
• When replacing a fuse, use only the prescribed rating. Using the wrong rating may cause malfunction.
• Disconnect the wiring harness before replacing a fuse to prevent short circuits.
• Use only the provided hardware and wire harness.
• Video cannot be viewed while the vehicle is moving. Find a safe place to park and engage the parking brake.
• If installation problems occur, consult your nearest DUAL dealer.
• For malfunctions, reset the unit as described on page 9. If problems persist, consult your dealer or call tech assistance @ 1-866-382-5476.
• To clean the monitor, wipe with a dry silicone cloth or soft cloth. Avoid stiff cloths or volatile solvents (paint thinner, alcohol) as they can scratch the panel or remove printing.
• Screen brightness may darken in cold temperatures; normal brightness returns after use.
• When extending cables, use automotive-grade cables (AWG 18 or larger) to prevent voltage drops.
• Do not touch liquid crystal fluid if the LCD is damaged. It may be hazardous. Wash skin/clothing immediately with soap if contact occurs.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) no harmful interference, and (2) acceptance of any interference received.

Warning: Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with Class B digital device limits, providing reasonable protection against harmful interference in residential installations. It generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. No guarantee of no interference in a particular installation.

If interference occurs, try correcting it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to a different circuit than the receiver.
• Consulting a dealer or experienced radio/TV technician.

Preparation and Installation

Before You Start

• Disconnect the negative battery terminal. Consult a qualified technician.
• Avoid installing the unit where it would be subject to high temperatures, direct sunlight, dust, dirt, or excessive vibration.

Getting Started

• Insert supplied keys into slots and slide the unit out of the mounting sleeve.
• Install mounting sleeve into opening, bending tabs to secure.
• Connect wiring harness as shown on page 6. Consult a technician if unsure.
• Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).
• Reconnect the negative battery terminal and test for correct operation.
• Snap the trim ring into place (if required).
• Slide the unit into the mounting sleeve to secure.

Mounting sleeve opening dimensions: 7-3/16" x 2-1/16" (183 mm x 53 mm)

Typical Front-Load DIN Mounting Method: [Diagram description: Shows keys, hex bolt, mounting strap, hex nut, washer, and mounting sleeve for installing the unit.]

Wiring Diagram - Inputs/Outputs

[Diagram description: A detailed wiring diagram showing connections for Bluetooth microphone, iPod, RCA cables (Rear Rch, Rear Lch, Front Rch, Front Lch, Subwoofer, Video In/Out), Camera Input, Radio Antenna, and Main Unit harness. Color-coded wires are shown connecting to specific terminals like BRAKE, CAMERA, AMP CONTROL, POWER ANTENNA, ILLUMINATION CONTROL, IGNITION SWITCH, GROUND, and MEMORY BACK-UP.]

Wiring Notes:

• Subwoofer output: The Subwoofer preamp audio output (black jacket with green RCA) is active in all audio modes.
• Rear camera input: A rear view camera (not included) can be used with the Camera input. Refer to page 29 for details.
• Connecting an iPod/iPhone device: Connect the included iPod cable to play music. Playback begins automatically.
• Fuse Replacement: Use the correct type and amperage fuse. The XDVD110BT uses one 15 amp ATC mini style fuse located on the back of the unit.

Control Locations

Unit Controls:

• 1. Release
• 2. Eject
• 3. Auxiliary A/V Input
• 4. Band
• 5. USB Port
• 6. Mute / End Call
• 7. Reset
• 8. Preset 6 / Screen Angle Up
• 9. Preset 5 / Screen Angle Down
• 10. Preset 4 / Stop
• 11. Preset 3 / Random
• 12. Preset 2 / Repeat
• 13. Preset 1 / Play / Pause
• 14. Mode
• 15. Volume Knob / Talk
• 16. Power / Open

Remote Control Buttons:

• 1. Power
• 2. Mode
• 3. Play / Pause
• 4. Mute
• 5. Title
• 6. Subtitle
• 7. Setup
• 8. Angle
• 9. Slow
• 10. Volume Up
• 11. Zoom
• 12. Select / Talk
• 13. Seek / Tune / Track Up
• 14. Volume Down
• 15. Audio
• 16. GOTO
• 17. EQ / Loudness / End Call
• 18. Number Keys
• 19. Root
• 20. OSD
• 21. Local / Random
• 22. Seek / Tune / Track Down
• 23. AS/PS / Repeat
• 24. ST / Program
• 25. Stop
• 26. Enter
• 27. Band

Remote Control Preparation

To insert or replace the battery:

1. Remove battery insulation tape.
2. Remove the battery holder.
3. Remove the battery from the holder.
4. Install the new battery, ensuring the (+) side faces up.
5. Insert the battery holder.

Notes:

• The remote uses one 3-volt Lithium CR2025 battery. Remove it if the remote will not be used for a month or longer.
• Dispose of the battery properly.
• Do not store the battery with metallic objects or materials.

General Operation

• Power / Open: Momentarily press Power to turn on. Press and hold for 2 seconds to turn off. Press Open to open/close the monitor.
• Volume: Rotate the volume knob to adjust volume (0-39).
• Volume Memory: If volume is <21 when turned off, it's retained. If >20, it defaults to 20 on next power-on.
• Mute: Momentarily press Mute to silence audio. Press again to resume. Rotating the volume knob also cancels mute.
• Mode: Press Mode to cycle through input modes (Tuner, Disc, iPod, SD, USB, Bluetooth, AV1, AV2). Modes appear on the display. iPod, USB, SD card must be connected/inserted to appear.
• Reset: Use a pen tip to press the Reset button to resolve abnormal operation or inoperability. This resets the main processor to default settings.
• 3.5mm A/V Input: Connect external audio/video devices to the front panel 3.5mm input.
• USB Port: Connect a USB device to play MP3/WMA files or view JPG photos. The front USB port supports playback only. Use the back USB port for charging devices.
• Main Menu: When the monitor is open, press the arrow in the top right corner to access the Main Menu.

From the Main Menu screen:

• View/select operational modes by touching icons.
• Enter standby mode by pressing STANDBY.
• Use up/down arrows to adjust screen angle.
• Select SETUP to enter the Setup menu.

Setup Menu

From the Main Menu, press SETUP to access the Setup menu. Select one of the seven icons (General, Time, Language, Audio, Video, Tuner, Calibration) to access sub-menus. Use arrow keys to scroll through options.

General

• Beep: Turn audible beep On or Off.
• Camera: Select Normal or Mirror image for camera input.

Time

• Time: Edit hour and minute settings using up/down arrows.
• Year: Edit year using up/down arrows.
• Month: Edit month using up/down arrows.
• Day: Edit day using up/down arrows.

Language

• Language: Select desired language (available on certain models).

Audio

• Subwoofer: Turn Subwoofer output On or Off.
• Loudness: Turn Loudness function On or Off.
• EQ: Select EQ options: Pop, Rock, Classic, Jazz, or Off.

Video

• Aspect Ratio: Select 4:3LB, 4:3PS, or 16:9.
• Brightness: Adjust from 0-14 (default 7).
• Contrast: Adjust from 0-14 (default 7).
• Saturation: Adjust from 0-14 (default 7).
• Hue: Adjust from 0-14 (default 7).
• Standard Video: Reset video adjustments to default values.

Tuner

• Radio Region: Set for Europe, America 1, America 2, Japan, or Russia.

Calibration

• Calibration: Press SELECT to begin touch screen calibration. Press the '+' as indicated on screen.

AM/FM Tuner Operation

Select the Tuner icon from the Main Menu or press Mode until Tuner is selected. Operation can be via touch screen or face buttons.

• Current Mode Indicator (1): Displays current mode.
• Tune Frequency Down (2): Momentarily tune down; hold to seek previous strong station.
• Information Display (3): Shows Loudness and EQ settings.
• Tune Frequency Up (4): Momentarily tune up; hold to seek next strong station.
• Main Menu Access (5): Return to Main Menu.
• Preset Station Display (6): Shows six preset stations. Press a preset to play. Up to 18 FM and 12 AM stations can be stored.
• EQ (7): Cycle through EQ options: Pop, Rock, Classic, Jazz, Off.
• Local (8): Select Local (LOC ON) or Distance (LOC OFF) tuning. Local tunes to strong nearby stations; Distance tunes to more distant stations when reception is poor. Distance is default.
• Loudness (9): Turn Loudness feature On or Off.

Tuner Controls

• Automatically Store / Preset Scan (10): Press and hold AS/PS to find and store strongest stations as presets. Momentarily press AS/PS to scan presets (10 seconds each).
• Manual Preset Save: Tune to a station, then press and hold the desired preset number.
• Select (11): Access Audio and Video setup menus.
• Audio Setup: Adjust Volume (0-39), Bass (-7 to 7), Treble (-7 to 7), Balance (Left/Right), Fader (Front/Rear).
• Video Setup: Adjust Brightness (0-14), Contrast (0-14), Saturation (0-14), Hue (0-14).
• Band (12): Toggle between AM and FM bands.
• Mute (13): Silence audio. Press again to resume.

CD Operation

Insert disc with label facing up at a slight upward angle for automatic playback. If resuming from another mode, select DISC from Main Menu or press MODE until DISC is selected.

• Current Mode Indicator (1): Displays current mode.
• Elapsed Time Indicator (2): Shows elapsed time of current track.
• Track Indicator (3): Shows current and total tracks.
• Scroll Up / Down Arrows (4): Navigate track playlist.
• Volume Indicator (5): Displays current volume.
• CD Track List (6): Shows first five tracks. Use arrows to scroll or press track number to play instantly.
• Main Menu Access (7): Return to Main Menu.
• Play / Pause (8): Pause playback; press again to resume.
• Stop (9): Temporarily stop playback. Press Play to resume from current position. Press Stop again to fully stop. Press Play to start from beginning.

CD Controls

• Fast Reverse (10): Press ⏪ to fast reverse (2x, 4x, 8x, 16x, 20x).
• Fast Forward (11): Press ⏩ to fast forward (2x, 4x, 8x, 16x, 20x).
• Previous Track (12): Press Previous Track to go back to the previous track.
• Next Track (13): Press Next Track to advance to the next track.
• Volume / Audio Settings (14): Adjust volume (0-39) and audio settings (Bass, Treble, Balance, Fader).
• Additional Options (15): Access more CD playback options.
• Time Indicator (16): Toggle between elapsed and remaining time.
• Repeat (17): Cycle through Repeat options: RPT ONE, RPT ALL, OFF.
• Direct Track Access (18): Access numeric keyboard to select track number. Press OK to play.
• Random (19): Turn Random play ON or OFF.
• Intro (20): Play the first 10 seconds of each song. Press again to return to sequential play.
• TFT Screen (21): Turn off the TFT display. Press anywhere on the screen to turn it back on.

MP3/WMA/JPG Operation

To play MP3, WMA, and JPG files from disc, USB, or SD card. Insert media, connect device, and playback begins automatically. To return to media playback from another mode, select the respective icon from the Main Menu or press MODE.

• Using a Cable: Connect USB device to the black USB input cable.
• Using an SD Card: Insert SD card into the SD slot (behind the face).

⚠️ Note: JPG files cannot be viewed while the vehicle is moving. This function is active only when the vehicle is in Park and the parking brake is engaged.

• Navigation Button (1): Navigates through Folder Menu, Device Menu, and Playback Menu.
• File Indicator (2): Shows current file and total files in the folder.
• OSD Controls (3): Press to view OSD controls.
• Current Mode Indicator (4): Displays current mode.
• Information Display (5): Scrolls through file info (name, title, artist, album).
• Main Menu Access (6): Return to Main Menu.
• Elapsed Time (7): Displays elapsed time of the current track.

MP3/WMA/JPG Controls

• Additional Options (8): Access additional playback options.
• Volume / Audio Settings (9): Adjust volume (0-39) and audio settings (Bass, Treble, Balance, Fader).
• Next Track (10): Advance to the next file.
• Previous Track (11): Go back to the previous file.
• Fast Forward (12): Press ⏩ for fast forward playback (2x, 4x, 8x, 16x, 20x).
• Fast Reverse (13): Press ⏪ for fast reverse playback (2x, 4x, 8x, 16x, 20x).
• Stop (14): Temporarily stop playback and return to the folder menu.
• Play / Pause (15): Pause playback; press again to resume.
• Additional Options (16): Return to original OSD option display.
• Direct Song Access (17): Access numeric keyboard to select song number. Press OK to play.
• TFT Screen (18): Turn off the TFT display. Press anywhere on the screen to turn it back on.
• Repeat (19): Cycle through Repeat options: RPT ONE, RPT Folder, RPT ALL, OFF.
• Random (20): Turn Random function ON or OFF.

Viewing JPEG Images

When viewing JPG images, press Area E to display on-screen JPG controls.

• Play / Pause (1): Pause slideshow; press again to resume.
• Stop (2): Stop slideshow and return to photo menu.
• Previous Photo (3): Go back to the previous image.
• Next Photo (4): Advance to the next image.
• Additional Options (5): Access additional photo options.
• Repeat (6): Cycle through Repeat options: RPT ONE, RPT FOLDER, RPT ALL, OFF.
• Direct File Access (7): Access numeric keyboard to select file number. Press OK to play.
• Zoom (8): Zoom in (2x, 3x, 4x) or out (1/2x, 1/3x, 1/4x) on the selected image or turn zoom off.
• TFT Display (9): Turn off the TFT display. Press anywhere on the screen to turn it back on.

Media Compatibility - USB/SD Card

Notes: Due to technological advancements, some USB flash drives and/or SD cards may be incompatible with this unit.

Media Compatibility - CD/DVD

Media Compatibility

Disc Compatibility

• Compatible Discs: CD-DA, CD-ROM (ISO), CD-R, CD-RW, DVD Video, DVD+R/RW, DVD-R/RW.
• Incompatible Discs/Files: WMA files protected by DRM, WMA lossless format, discs recorded with Track At Once or packet writing, MP3 PRO, MP3 playlists, RMP format, WAV, WMV, DivX, Xvid, AVI, MPG, MPEG-4, AAC (protected and standard), M4A.

Some recordable DVDs and CDs may be incompatible depending on media type and recording method.

Playback Order

MP3/WMA playback starts in the root folder. Empty folders or folders without MP3/WMA/JPG files are skipped.

Compatible Recording Formats

• ISO9660 Standards: Maximum nested folder depth is 8. Valid characters for names are A-Z, 0-9, and "_". Some characters may not display correctly.
• This device supports Joliet and other ISO9660 conforming standards. Other formats may not play or display names correctly.

Additional MP3/WMA Information

An internal buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping.

Notes

• When playing discs with regular audio files (CD-DA or .WAV) and MP3/WMA files, only MP3/WMA files will play.
• Some files may not play or display correctly based on sampling rates and bit rates.
• Recommended MP3 settings: 128kbps or higher constant bit rate, 44.1kHz or higher sampling frequency.
• Recommended WMA settings: 64kbps or higher constant bit rate, 44.1kHz or higher sampling frequency.

DVD Setup - Region Management

DVD discs may have specific playback modes. This player is designed for DVD software encoded for specific region areas and cannot play discs encoded for other regions. It plays discs labeled "Region 1" or "All".

DVD Region Codes:

• 1 - USA, Canada
• 2 - Japan, Europe, South Africa, Middle East
• 3 - Rep. of Korea, Taiwan, Hong Kong, Parts of Southeast Asia
• 4 - Australia, New Zealand, Mexico, South America
• 5 - Eastern Europe, Russia, India, Africa
• 6 - China

DVD Disc Symbols

[Description of DVD Disc Symbols: Includes symbols for DVD VIDEO, DVD VIDEO TEXT, COMPACT DISC DIGITAL VIDEO, COMPACT DISC DIGITAL AUDIO, and their properties like single/double side, layer type, and max play time. Also includes symbols for number of voice languages (e.g., 8)), number of subtitle languages (e.g., 32), number of angles (e.g., 9), aspect ratios (16:9 LB), and region codes.]

Notes: Some DVD discs may only play in certain modes. Please read instructions provided with each disc.

DVD Setup - Parking Brake Initialization

⚠️ SAFETY WARNING: The video display will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. Video functions only operate when the vehicle is in Park and the parking brake is engaged. It is illegal in most states to view video while in motion. Refer to local laws.

The vehicle must be in park and the parking brake applied to view video.

A warning message appears if the parking brake is not engaged. Video display is not allowed until the parking brake is engaged. Connect the pink PARKING BRAKE wire to the brake switch circuit (see page 6). Note: DVD and AUX AV audio can be heard while the vehicle is in motion without the parking brake engaged.

Parking Brake Initialization:

1. Come to a complete stop and put the vehicle in Park.
2. Fully engage the parking brake.

DVD Operation

Insert disc with label facing up at a slight upward angle for automatic playback. Sub-menus may need to be accessed for DVD content. Read specific disc directions.

Ejecting the Disc: Press Eject [ eject symbol ] to eject the disc.

• Touchscreen Controls (1): Press Area E to display on-screen DVD controls.
• Current Mode Indicator (2): Displays current mode.
• Current Chapter Indicator (3): Shows current and total chapters. Access numeric keyboard to select chapter number. Press OK to play.
• Main Menu Access (4): Return to main menu.
• Additional Options (5): Access additional DVD options.
• Volume / Audio Settings (6): Adjust volume (0-39) and audio settings (Bass, Treble, Balance, Fader).

DVD Controls

• Next Chapter (7): Press Next Chapter to advance.
• Previous Chapter (8): Press Previous Chapter to go back.
• Fast Forward (9): Press ⏩ for fast forward playback (2x, 4x, 8x, 16x, 20x).
• Fast Reverse (10): Press ⏪ for fast reverse playback (2x, 4x, 8x, 16x, 20x).
• Stop (11): Press Stop [ stop symbol ] to temporarily stop. Press Play to resume. Press Stop again to fully stop. Press Play to start from beginning.
• Play / Pause (12): Press Play/Pause [ play/pause symbol ] to pause; press again to resume.
• Elapsed Time Indicator (13): Shows elapsed time of DVD playback.
• Remaining Time (14): View remaining time (default is elapsed time).
• Language Options (15): Select different language options (if available).
• Previous Folder (16): Return to the previous folder on the DVD (if available).
• Title Menu (17): Return to the title menu of the DVD.
• Repeat (18): Cycle through Repeat options: CHAPTER, TITLE, RPT ALL, OFF.
• Subtitle Language (19): Select subtitle language (English, Spanish, French, or Off).
• Direct Chapter Access (20): Access numeric keyboard to select chapter number. Press OK to play.
• Zoom (21): Zoom in (2x, 3x, 4x) or out (1/2x, 1/3x, 1/4x) during playback or turn zoom off.
• TFT Screen (22): Turn off the TFT display. Press anywhere on the screen to turn it back on.

Operation of iPod

Connect an iPod device using the supplied iPod connection cable to listen to music. Playback can be controlled by the unit's on-screen controls or directly from the iPod. This model does not support video/photo playback.

• Current Mode Indicator (1): Displays current mode.
• Playback Information (2): Displays current playback functions.
• Song Information (3): Displays current song details (name, artist, album).
• Main Menu (4): Access main menu. Also acts as a return arrow to go up one level in the music menu.
• Elapsed Time Indicator (5): Displays elapsed and remaining time for the current song.

iPod Controls

• Menu (6): Return to the main menu.
• Volume / Audio Settings (7): Adjust volume (0-39) and audio settings (Bass, Treble, Balance, Fader).
• Next Track (8): Advance to the next song.
• Previous Track (9): Go back to the previous song.
• Fast Forward (10): Press ⏩ for fast forward playback (2x, 4x, 8x, 16x, 20x).
• Fast Reverse (11): Press ⏪ for fast reverse playback (2x, 4x, 8x, 16x, 20x).
• Play / Pause (12): Press Play/Pause [ play/pause symbol ] to pause; press again to resume.
• Repeat (13): Cycle through Repeat options: RPT ONE, RPT Folder, RPT ALL, OFF.

Bluetooth Operation

Bluetooth features utilize the included external microphone, designed for mounting to the visor or A-pillar.

Pairing and Connecting

A Bluetooth device must be paired and connected. The unit broadcasts a pairing signal when no devices are connected. Complete pairing from your Bluetooth device.

• Device Name: "Dual BT"
• Bluetooth Passcode: "1234"

Once paired, Bluetooth usually connects automatically when the device is in range and the unit is powered on.

• Current Mode Indicator (1): Displays current mode.
• Playback Information (2): Access main menu screen.
• Dialing a Number (3): Display keypad and dial a number.

Bluetooth Controls

• Making a Call (4): Press to connect a call.
• Transferring Audio (5): Transfer audio between the head unit and mobile phone.
• Recent Call List (6): Access recent calls (Received, Dialed, Missed).
• End Call (7): End the current call.
• Streaming Audio (8): Enter the music control menu.
• Next Track (9): Advance to the next track.
• Fast Reverse (10): Press ⏪ to play or pause music.
• Previous Track (11): Skip to the previous track.

Auxiliary Inputs - AV1 & AV2

• Using AV1 Input: Connect an audio/video source to the 3.5mm (front panel) input. Select AV1 from the Main Menu for audio. Engage parking brake (page 24) to watch video. Adjust volume on the external source as needed.
• Using AV2 Input: Connect an audio/video source to the Auxiliary Input 2 (Red/White/Yellow RCA connectors). Refer to page 6. Select AV2 from the Main Menu for audio. Engage parking brake (page 24) to watch video.

Rear Camera Operation - (Optional)

• Using Rear Camera: Connect an optional rear camera to the Camera Input (purple RCA connector). Refer to page 6. The unit automatically selects camera mode when connected to the reverse lamp circuitry. Refer to page 6.

Limited One Year Warranty

This warranty grants specific legal rights, which may vary by state.

Dual Electronics Corp. warrants this product to the original purchaser against defects in material and workmanship for one year from the original purchase date.

Dual Electronics Corp. will, at its option, repair any defect or furnish an equal new, renewed, or comparable product during the warranty period, subject to verification and proof of purchase. Replacement products are warranted for the balance of the original warranty period.

Who is covered?

This warranty extends to the original retail purchaser for products bought from an authorized Dual dealer and used in the U.S.A.

What is covered?

This warranty covers all defects in material and workmanship. It does NOT cover: software, installation/removal costs, damage from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair, failure to follow instructions, or damage during return shipment. Software license conditions and copyright notices are available via www.dualav.com.

What to do?

1. Before calling for service, check the troubleshooting guide. A minor adjustment might resolve the issue.
2. For service during the warranty period, pack the product carefully (preferably in original packaging) and ship it via prepaid transportation with a copy of the original receipt to an authorized service center.
3. Describe the problem in writing, including your name, return UPS shipping address (no P.O. Boxes), and daytime phone number.
4. For information and location of the nearest service center, call toll-free at 1-866-382-5476 or email cs@dualav.com.

Exclusion of Certain Damages: This warranty is exclusive and in lieu of all other warranties, expressed or implied. No person is authorized to assume any other liability for the company. The company is not liable for indirect, incidental, or consequential damages.

Specifications

CEA-2006 Power Standard Specifications: (reference: 14.4VDC +/- 0.2V, 20Hz~20kHz) Power Output: 18 Watts RMS x 4 channels at 4 ohms and < 1% THD+N. Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms).

Troubleshooting

For Your Records

Keep your original sales receipt as proof of purchase for service. It indicates the date you purchased your Dual product.

Dealer Name: [____________________]

Dealer Phone: [____________________]

Purchase Date: [____________________]

Register Your Product

Register your product online at www.dualav.com.