Dual DV715B Installation/Owner's Manual

Safety Notes

The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.

Copyright Notes

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Namsung is under license.

SD Logo is a trademark of SD-3C, LLC.

Other trademarks and trade names are those of their respective owners.

Warning Statement

Upon installation of this Monitor/DVD player ("unit") into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle's occupants or persons outside the vehicle and/or property damage.

Several states prohibit the installation of monitors/DVD players if the screen is visible from the driver's seat. If you reside in a jurisdiction which has enacted such a law, this unit must not be installed so that the screen is visible from the driver's seat. When installing this unit in the front console/dashboard, the unit must be positioned so that it is facing the front passenger seat only. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle's occupants or persons outside the vehicle and/or property damage.

This unit is designed so that it may be operated only when the vehicle is in "Park" and the parking brake is fully engaged. To this end, this unit includes a parking brake lock-out feature which prohibits the unit from operating if the vehicle is not in "Park" and/or the parking brake is not fully engaged. When installing this unit, the installer must connect the parking brake detect wire to the parking brake mechanism in order to make the parking brake lock-out feature operable. DO NOT simply ground the parking brake detect wire to a metal portion of the vehicle. Failure to properly install the parking brake lock-out feature could lead to driver distraction which could result in serious injury or death to the driver's occupants or persons outside the vehicle and/or property damage.

Once the parking brake lock-out feature is installed, the owner/user must not attempt to disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking brake and/or (b) purchasing/using any device or unit designed to send necessary brake signals to the unit. Failure to follow these instructions could lead to driver distraction which could result in serious injury or death to the driver's occupants or persons outside the vehicle and/or property damage.

When operating this unit, keep the unit's volume level low enough so that the vehicle's occupants can hear traffic-related sounds such as police and emergency vehicles. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle's occupants or persons outside the vehicle and/or property damage.

Safety Information

Please read all instructions carefully before attempting to install or operate.

Due to its technical nature, it is highly recommended that your DUAL DV715B is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.

To prevent damage or injury:

• Make sure to ground the unit securely to the vehicle chassis ground.
• Do not remove the top or bottom covers of the unit.
• Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.
• Do not subject the unit to excessive shock.
• When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause the unit to malfunction.
• To prevent short circuits when replacing a fuse, disconnect the wiring harness first.
• Use only the provided hardware and wire harness.
• You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.
• If you experience problems during installation, consult your nearest DUAL dealer.
• If the unit malfunctions, reset the unit as described on page 10 first. If the problem still persists, consult your nearest DUAL dealer or call tech assistance @ 1-866-382-5476.
• To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.
• When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than usual. Normal brightness will return after using the monitor for a while.
• When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables with an area of 0.75mm (AWG 18) or more to prevent voltage drops.
• Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Preparation and Mounting

Before You Start

• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

Getting Started

• Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve.
• Install mounting sleeve into opening, bending tabs to secure.
• Connect wiring harness as shown on page 6. Consult a qualified technician if you are unsure.
• Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).
• Reconnect negative battery terminal, and test for correct operation.
• Snap trim ring into place (if required).
• Slide unit into mounting sleeve to secure.

Mounting sleeve opening dimensions: 7-3/16" x 2-1/16" (183 mm x 53 mm)

Diagram Description: A diagram shows the components for a typical front-load DIN mounting method, including a slide bracket housing, key plates, and plastic trim.

Wiring Diagram - Inputs/Outputs

Diagram Description: A wiring diagram illustrates the connections for the unit. It shows outputs for RL, RR, FL, FR, Subwoofer, and Video. Inputs include Radio Antenna, Video Output, Rear Camera Input, Aux Input L/R, and Video Input. Power connections include ACC, B+, Ground, and Auto Antenna. Speaker connections are shown for Front Left, Front Right, Rear Left, and Rear Right channels. Control wires include SWC (GND, 1, 2), Rear View Control, Parking Brake, Illumination, and Remote Turn-On.

Note on Fuses: When replacing a fuse, use the correct type and amperage. The unit uses one 15 amp ATM mini style fuse located inside the in-line filter box.

Wiring Notes:

• Subwoofer output: The Subwoofer preamp audio output (black jacket with green RCA) is active in all audio modes.
• Rear camera input: A rear view camera (not included) can be used with the Camera input. Refer to page 29 for details.

Control Locations

Front Panel Controls

• 1 Release: Ejects the faceplate.
• 2 Eject: Ejects the disc.
• 3 IR Sensor: Receives signals from the remote control.
• 4 USB Port: Connect a USB device.
• 5 Microphone: For hands-free calling.
• 6 Auxiliary Input: Connect external audio/video devices.
• 7 Mute / End Call: Mutes audio or ends a call.
• 8 Tune/Track Down: Tunes radio frequencies or moves to the previous track.
• 9 Volume Knob / Push Select: Adjusts volume or selects options.
• 10 Mode: Cycles through input modes (Tuner, Disc, USB, SD, Bluetooth, Aux).
• 11 Power: Turns the unit on or off.
• 12 Play / Pause / Band: Plays/pauses media or selects radio band.
• 13 Tune / Track Up: Tunes radio frequencies or moves to the next track.
• 14 Answer Call: Answers an incoming call.
• 15 Open: Opens or closes the LCD screen.

Remote Control Layout

The remote control has dedicated buttons for Power & Mode, Talk, Adjust Angle, Setup, Subtitle & Local/Distance, Tune/Track Down, Band, Title/PBC/AS/PS, Back, Volume Up/Down, Menu/Subwoofer, Angle/Zoom, Audio/Mono/Stereo, EQ/Loudness, Go to/* Key, Mute, End/Reject, Clock, Select, Tune/Track Up, Channel Up, OK, Forward, Channel Down, Stop, Play/Pause, Traffic Announcement, +10/# Key, and Alternative Frequencies.

Remote Control Preparation

To insert or replace the battery:

1. Remove battery insulation tape (if present).
2. Remove the battery holder by pressing on the side.
3. Remove the old battery from the holder.
4. Install the new 3-volt Lithium CR2025 battery, ensuring the (+) side faces up.
5. Insert the battery holder back into the remote.

Notes:

• Remove the battery if the remote will not be used for a month or longer.
• Dispose of batteries properly.
• Do not store the battery with metallic objects or materials.

General Operation

Installing the Faceplate

Align the faceplate with the front of the unit, then snap in place beginning with the left side.

Power On/Off

Momentarily press the Power button [?] to turn the unit on or off.

Volume

Rotate the volume knob [?️] to increase or decrease the volume level.

Mute

Momentarily press MUTE [?] to silence the audio. Press MUTE again to return to the previously selected volume. Rotating the volume knob while muted will also cancel the mute function.

Mode

Press MODE [?️] to step through all available input modes: Tuner, Disc (DVD/CD playback), iPod, SD, USB, Bluetooth, and auxiliary input. Modes are indicated on the display. Optional iPod devices, USB flash drives, and SD cards must be connected/inserted to appear in the mode selection string.

Auxiliary Input

Connect external audio/video devices to the 3.5mm auxiliary input on the front panel.

USB Port

Connect a USB device to play MP3/WMA files or view AVI, MP4 video files or JPG photos.

SD Card

Insert an SD card into the SD slot (located behind the faceplate) to play MP3/WMA files or view AVI, MP4 video files or JPG photos.

Opening the LCD

Press OPEN [▶️] to open or close the LCD screen.

Screen Angle

Press TILT [⬆️] or TILT [⬇️] to adjust the screen angle up or down.

Main Menu

When the monitor is open, press the home icon [?] in the top left corner to access the Main Menu screen.

Main Menu Screen Layout: Displays icons for RADIO, DISC, USB, SD CARD, BT PHONE, BT MUSIC, REAR CAMERA, AUX IN, AV IN, and SETUP.

Screen Controls:

1. Put the monitor into standby mode.
2. Close the LCD screen.
3. Tilt screen up.
4. Tilt screen down.
5. Eject the disc.
6. Set up steering wheel controls (refer to separate insert).

Setup Menu

From the Main Menu screen, press SETUP [⚙️] to access the Setup menu and select from six categories: General, Time, Video, Language, Illumination, and Calibration.

General Settings

• Animation: Select animation length (Off, 10s, 30s, 1m, 90s, 2m, 3m, 4m).
• Key Beep: Turn key beep ON or OFF.
• Disc: Adjust disc options: Format (NTSC, PAL, AUTO), TV Type (4:3PS, 4:3 LB, 16:9), Rating.
• Radio: Adjust radio options: STEREO/MONO, LOCAL/DX tuning, Region settings (EUROPE, USA, AMERICAN1, AMERICAN2, OIRT), RDS Regional (ON/OFF), RDS PI MUTE/SOUND, RDS TA (OFF/ON), RDS AF (OFF/ON).
• Wallpaper: Select from three wallpaper options.
• Camera Icon: Turn camera icon ON or OFF on the Source Menu.
• Bluetooth: Turn Bluetooth ON/OFF, Auto Answer (ON/OFF), Auto Connect (ON/OFF), Auto Download (ON/OFF).
• Dimmer: Adjust dimmer levels (1-6) or OFF.
• Demo: Turn Demo mode OFF or ON.
• About: View information about the unit.

Time Settings

• Hour: Press < or > to adjust.
• Minute: Press < or > to adjust.
• Format: Select 12HR or 24HR clock display.
• AM/PM: Select AM or PM.

Video Settings

• Color: Adjust between -20 and 20.
• Brightness: Adjust between -20 and 20.
• Contrast: Adjust between -20 and 20.
• Tint: Adjust between -20 and 20.

Language Settings

• English: Set the unit language to English.

RGB Illumination Settings

• Red/Green/Blue: Adjust illumination color levels.
• Color Selector: Use the color selector to choose illumination color.
• Auto Color: Restore automatic color settings.

Calibration

• Calibrate the Screen: Press YES to calibrate the touch screen.

Reset

To resolve abnormal operation or if the unit is inoperable, use the tip of a pen to press the RESET button (located behind the faceplate). The unit will reset the main processor to the default settings.

AM/FM/RDS Tuner Operation

Radio Interface:

• Main Menu [?]: Select the Radio icon.
• Return to Main Menu [⬅️]: Press the back arrow.
• Current Mode Indicator [?️]: Displays current mode.
• Tune Frequency Down [⏪]: Press << to tune to a lower frequency, or < to tune down one step.
• Tune Frequency Up [⏩]: Press >> to tune to a higher frequency, or > to tune up one step.
• Phone [?]: Access Phone when Bluetooth is enabled. Turns Bluetooth ON if off.
• Camera [?]: Access Camera when function is enabled.
• Previous Options [↩️]: See the previous screen of options.
• Preset Stations [?]: Displays six preset stations. To store a station, tune to it, then press and hold the desired preset button. Up to 18 FM and 12 AM stations can be stored. Press a preset station to play it instantly.
• Mute [?]: Mutes unit sound. Press again or adjust volume knob to unmute.

Audio Settings:

• EQ: Select preset EQ (JAZZ, CLASSIC, POP, ROCK, BEAT, FLAT) or USER for manual Bass, Middle, Treble adjustment (-7 to 7).
• Fader/Balance: Adjust Fader (10F to 10R) and Balance (10L to 10R).
• Subwoofer/Loudness: Adjust subwoofer volume (1-12) or OFF. Select loudness levels (OFF, LOW, HIGH).
• ASP (Audio Sound Processor): Adjust Bass Center Frequency (60Hz-200Hz), Bass Q Value (1.0-2.0), Middle Center Frequency (500Hz-2.5kHz), Middle Q Value (0.5-1.25), Treble Center Frequency (10kHz-17.5kHz), Loudness Center Frequency (FLAT-2400Hz), Subwoofer Center Frequency (FLAT-160Hz).

Other Tuner Options:

• Automatically Store / Preset Scan [?]: Scan preset stations (first 10s of each). Press again to stop. Press and hold to auto-find and store strongest stations.
• Band [?️]: Select between AM and FM bands.
• Next Options [➡️]: See the next screen of options.
• Local / Distance [?]: Toggle between LOCAL and DX tuning.
• Tilt Screen Up [⬆️]: Adjust screen angle up.
• Tilt Screen Down [⬇️]: Adjust screen angle down.
• Program Type (PTY) [?]: Select Program Type / Genre.
• Traffic Announcements [?]: Turn Traffic Announcements ON/OFF.
• Alternative Frequencies [?]: Select Alternative Frequencies.

CD/USB/SD Card Operation

To play audio files from a disc, USB device, or SD card, insert the media and playback will begin automatically. To return to disc, USB, or SD card playback from another mode, select the corresponding icon from the Main Menu.

• Disc Playback [?]: Insert disc into the slot.
• USB Playback [?]: Insert USB device into the USB slot.
• SD Card Playback [?]: Insert SD card into the SD slot (label facing up).

Playback Controls:

• Main Menu [?]: Return to Main Menu screen.
• Current Mode Indicator [?️]: Displays current mode.
• Repeat [?]: Select repeat option (Repeat 1, Repeat Folder, Repeat Off).
• Random [?]: Enable or disable random playback.
• Phone [?]: Access Phone when Bluetooth is enabled. Turns Bluetooth ON if off.
• Direct File Access [?️]: Access directory of folders and files. Use up/down arrows to scroll, then press folder/file name. Default display is Music files; select Photo or Video icons to view those files.
• Camera [?]: Access Camera when function is enabled.
• Previous Options [↩️]: See the previous screen of options.
• Mute [?]: Mute unit sound. Press again or adjust volume knob to unmute.
• Previous File/Track [⏪]: Go back to the previous file or track.
• Audio [?]: Adjust Audio options (refer to page 13).
• Play / Pause [▶️ / ⏸️]: Pause or resume playback.
• Backward [⏪]: Fast reverse current track (FRx2, FRx4, FRx8, FRx20).
• Next File/Track [⏩]: Advance to the next file or track.
• Forward [⏩]: Fast forward current track (FRx2, FRx4, FRx8, FRx20).
• Next Options [➡️]: See the next screen of options.
• Tilt Screen Up [⬆️]: Adjust screen angle up.
• Tilt Screen Down [⬇️]: Adjust screen angle down.
• Traffic Announcements [?]: Turn Traffic Announcements ON/OFF.
• Alternative Frequencies [?]: Select Alternative Frequencies.

Media Compatibility - USB/SD Card

Compatible File Types:

Notes:

• It is not possible to view JPG files on the in-dash monitor while the vehicle is moving. This is a safety feature to prevent driver distraction.
• The JPG image viewer function will only operate when the vehicle is in park and the parking brake is engaged.
• Due to ongoing technological advancement, some USB flash drives and/or SD cards may be incompatible with this unit.

Media Compatibility - CD/DVD

Compatible File Types:

Notes:

• It is not possible to view JPG files on the in-dash monitor while the vehicle is moving. This is a safety feature to prevent driver distraction.
• The JPG image viewer function will only operate when the vehicle is in park and the parking brake is engaged, as described on page 26.

DVD Operation

Inserting a Disc: Insert disc into the slot; playback begins automatically. Sub-menus may need to be pressed to access DVD content. Read disc directions for other features.

Ejecting the Disc: Press the eject button [?].

Touchscreen Controls: Press anywhere on the LCD to display touch screen controls.

• Main Menu [?]: Return to Main Menu screen.
• Direct Title Access [1️⃣]: Directly select a chapter or title if allowed by the disc.
• Direct Chapter Access [2️⃣]: Use the keypad to directly select a specific chapter.
• DVD Menu [3️⃣]: Return to the DVD menu.
• Additional Options [4️⃣]: Reveal options: Subtitles (English/Off), Language (playback language), Angle (playback angle).
• Elapsed Time [⏱️]: Displays elapsed time and time remaining on the DVD.
• Mute [?]: Mute unit sound. Press again or adjust volume knob to unmute.
• Previous Chapter [⏪]: Return to the previous chapter.
• Play / Pause [▶️ / ⏸️]: Play or pause DVD playback.
• Next Chapter [⏩]: Advance to the next chapter.
• Fast Reverse [⏪]: Fast reverse playback at various speeds (FRx2, FRx4, FRx8, FRx20).
• Fast Forward [⏩]: Fast forward playback at various speeds (FRx2, FRx4, FRx8, FRx20).
• Repeat [?]: Select repeat options (Repeat Chapter, Repeat Title, Repeat All, Repeat Off).
• Random [?]: Play chapters in random order or Random Off to play disc in order.
• Tilt Screen Up [⬆️]: Adjust screen angle up.
• Tilt Screen Down [⬇️]: Adjust screen angle down.
• Phone [?]: Access Phone when Bluetooth is enabled. Turns Bluetooth ON if off.
• Traffic Announcements [?]: Turn Traffic Announcements ON/OFF.
• Alternative Frequencies [?]: Select Alternative Frequencies.
• Previous Options [↩️]: View the previous option screen.

Bluetooth Operation

Preparation

Before using a Bluetooth device, it must be paired and connected. Ensure Bluetooth is activated on your device before pairing.

Pairing a New Device

The unit broadcasts a pairing signal when no devices are connected. Complete the pairing sequence from your Bluetooth device. The device name is "Dual BT". The Bluetooth passcode is "1234". Pairing can be done in any mode.

Note: Pairing may need to be repeated on some phones if connectivity issues arise.

Connecting a Paired Device

Most Bluetooth devices support auto-connect and will connect automatically if in range and the unit is powered on. If a previously paired device does not connect, enter the Bluetooth setup menu and ensure Auto Connect is ON.

Bluetooth Phone

To access the phone, select Bluetooth Phone from the Main Menu or press the phone icon [?].

• Main Menu [?]: Return to Main Menu screen.
• Current Mode Indicator [?️]: Displays current mode.
• Phone Keypad: Use the keypad to dial numbers. Numbers can also be dialed directly from the phone.
• Redial [?]: Redial the last number called.
• Talk [?]: Connect a call.
• Backspace [↩️]: Backspace when typing a number.
• End Call [❌]: End a call.
• Make a Call [?]: Display keypad and make a call.
• Dialed Call Log [?️]: View dialed call log. Use icons to search or scroll.
• Received Call Log [?️]: View received call log. Use icons to search or scroll.
• Missed Call Log [?️]: View missed call log. Use icons to search or scroll.
• Contacts [?]: View contacts. Use icons to search or scroll.
• View Connections [?]: View active/available Bluetooth connections. Use icons to disconnect, connect, search, or scroll.

Bluetooth Music

To play music via Bluetooth, select Bluetooth Music from the Main Menu.

• Mute [?]: Mute unit sound. Press again or adjust volume knob to unmute.
• Previous File/Track [⏪]: Go back to the previous file or track.
• Audio [?]: Adjust Audio options (refer to page 13).
• Play / Pause [▶️ / ⏸️]: Pause or resume playback.
• Tilt Screen Up [⬆️]: Adjust screen angle up.
• Next File/Track [⏩]: Advance to the next file or track.
• Tilt Screen Down [⬇️]: Adjust screen angle down.
• Next Options [➡️]: View next screen of options (Traffic Announcements, Alternative Frequencies).

Front 3.5mm Aux Input & Rear RCA A/V Input

Auxiliary Input

Connect an optional audio source into the 3.5mm (front panel) input. Select auxiliary input from the Main Menu to listen to audio. Adjust volume on the external audio source as needed.

Using AV Input

Connect an optional audio/video source to the rear auxiliary input (Red/White/Yellow RCA connectors). Refer to page 6 for details. Select AV Input from the Main Menu to listen to audio. Engage parking brake to watch video.

Rear Camera Operation - (Optional)

Using Rear Camera

• Auto Selection: The unit will automatically select camera mode when connected to the reverse lamp circuitry.
• Manual selection: Touch the CAMERA icon [?] from the Main Menu or any operational mode (when enabled) to select camera mode. Touch the top left area on the screen to exit camera mode.

Note: Manual mode is for dedicated cameras always on while driving, not for cameras connected to the vehicle's reverse light.

Note: The external video output is not active when using the rear camera input.

Limited One Year Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.

Dual Electronics Corp. agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed, or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period.

Who is covered?

This warranty is extended to the original retail purchaser for products purchased from an authorized Dual dealer and used in the U.S.A.

What is covered?

This warranty covers all defects in material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.dualav.com.

What to do?

1. Before you call for service, check the troubleshooting guide in your owner's manual. A slight adjustment of any custom controls may save you a service call.
2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.
4. For more information and for the location of the nearest authorized service center please contact us by one of the following methods:
   • Call us toll-free at 1-866-382-5476
   • E-mail us at cs@dualav.com

Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company's negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages.

Specifications

Design and specifications subject to change without notice.

CEA-2006 Power Standard Specifications (reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)

• Power Output: 16 Watts RMS x 4 channels at 4 ohms and < 1% THD+N
• Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms)

Troubleshooting

For Your Records

Please keep your original sales receipt and be prepared to provide this receipt in the event you require service, as your original receipt is considered the best proof of purchase and indicates the date you purchased your Dual product.

Dealer Name: [____________________]

Dealer Phone: [____________________]

Purchase Date: [____________________]

Register Your Product

Register your product online at www.dualav.com.

Contact Information & Copyright

Dual Electronics Corp.

Toll Free: 1-866-382-5476

Monday-Friday, 9AM-5PM EST

Website: www.dualav.com

©2015 Dual Electronics Corp. All rights reserved.

NSA0415-V01

Printed in China